1 |
Hydrogen-Methane combustion modeling in the burner of the SGT-800 Siemens Energy gas turbineBozikis, Nikolaos January 2022 (has links)
Industrial gas turbines constitute an integral part of today’s electricalpower production infrastructure. Reacting gas flows in these machines arevery interesting and complex in nature since they exhibit highly turbulentbehaviour which is strongly coupled to the chemical reaction dynamics.Thus developing accurate CFD models for such flows while keeping thecomputational expense reasonable is a non-trivial task. In this studyLarge-Eddy simulations of hydrogen-methane fuel mixture combustion inthe SGT800’s (Siemens Energy Gas turbine 800) burner, in atmosphericconditions are performed using the CFD code Starccm+ (versions 16.04and 16.06).
|
2 |
Green Fuel SimulationsGutiérrez, Daniel January 2020 (has links)
Many industries have entered a new global phase which takes the environment in mind. The gas turbine industry is no exception, where the utilization of green fuels is the future to spare the environment from carbon dioxide and NOx emissions. Hydrogen has been identified as a fuel which can fulfil the global requirements set by governments worldwide. Combustion instabilities are not inevitable during gas turbine operations, especially when using a highly reactive and diffusive fuel as hydrogen. These thermoacoustics instabilities can damage mechanical components and have economic consequences in terms of maintenance and reparation. Understanding these thermoacoustic instabilities in gas turbine burners is of great interest. COMSOL Multiphysics offers a robust acoustic module compared to other available acoustic simulation programs. In this thesis, an Acoustic finite element model was built representing an atmospheric combustion rig (ACR), used to test the burners performance and NOx emissions. Complementary computational fluid dynamics (CFD) simulations were performed for 100 % hydrogen as fuel by using the Reynolds average Navier-Stokes (RANS) lag EB k - epsilon turbulence model. Necessary data was successfully imported to the Acoustic finite element model. Different techniques of building the mesh were used in COMSOL Multiphysics and NX. Similar results were obtained, proving that both mesh tools work well in acoustic simulations. Two different ways of solving the eigenvalue problem in acoustics were implemented, the classic Helmholtz equation and Linearized Navier-Stokes equations, both in the frequency domain. The Helmholtz equation proved to be efficient and detected multiple modes in the frequency range of interest. Critical modes which lived in the burner and the combustion chamber were identified. Defining a hard and soft wall boundary condition at the inlets and outlet of the atmospheric combustion rig gave similar eigenfrequencies when comparing the two boundary conditions. The soft wall boundary condition was defined with a characteristic impedance, giving a high uncertainty whether the results were trustworthy or not. A boundary condition study revealed that the boundary condition at the outlet was valid for modes living in the burner and combustion chamber. Solving the eigenvalue problem with the Linearized Navier-Stokes equations proved to be computationally demanding compared to the Helmholtz equation. Similar modes shapes were found at higher frequencies, but pressure perturbations were observed in the region where the turbulence was dominant. A prestudy for a stability analysis was established, where the ACR and the flame was represented as a generic model. Implementing a Flame Transfer Function (FTF), more specifically a linear n - tau model, showed that the time delay tau is most sensible for a parametric change and hence needs to be chosen cautiously
|
Page generated in 0.1045 seconds