Ubiquitous computing systems aim to assist us as we go about our daily lives, whilst at the same time fading into the background so that we do not notice their presence. To do this they need to be able to sense their surroundings and infer context about the state of the world. Location has proven to be an important source of contextual information for such systems. If a device can determine its own location then it can infer its surroundings and adapt accordingly. Of particular interest for many ubiquitous computing systems is the ability to track people in indoor environments. This interest has led to the development of many indoor location systems based on a range of technologies including infra-red light, ultrasound and radio. Unfortunately existing systems that achieve the kind of sub-metre accuracies desired by many location-aware applications require large amounts of infrastructure to be installed into the environment. This thesis investigates an alternative approach to indoor pedestrian tracking that uses on-body inertial sensors rather than relying on fixed infrastructure. It is demonstrated that general purpose inertial navigation algorithms are unsuitable for pedestrian tracking due to the rapid accumulation of errors in the tracked position. In practice it is necessary to frequently correct such algorithms using additional measurements or constraints. An extended Kalman filteris developed for this purpose and is applied to track pedestrians using foot-mounted inertial sensors. By detecting when the foot is stationary and applying zero velocity corrections a pedestrian's relative movements can be tracked far more accurately than is possible using uncorrected inertial navigation. Having developed an effective means of calculating a pedestrian's relative movements, a localisation filter is developed that combines relative movement measurements with environmental constraints derived from a map of the environment. By enforcing constraints such as impassable walls and floors the filter is able to narrow down the absolute position of a pedestrian as they move through an indoor environment. Once the user's position has been uniquely determined the same filter is demonstrated to track the user's absolute position to sub-metre accuracy. The localisation filter in its simplest form is computationally expensive. Furthermore symmetry exhibited by the environment may delay or prevent the filter from determining the user's position. The final part of this thesis describes the concept of assisted localisation, in which additional measurements are used to solve both of these problems. The use of sparsely deployed WiFi access points is discussed in detail. The thesis concludes that inertial sensors can be used to track pedestrians in indoor environments. Such an approach is suited to cases in which it is impossible or impractical to install large amounts of fixed infrastructure into the environment in advance.

In this work, MEMS inertial switches intended to be triggered at multiple acceleration thresholds in two directions were implemented and proven effective. The switches consume virtually no power in their open switching state. Multiple acceleration thresholds can be beneficial in triggering different actions for different acceleration events. Low power consumption can aid in their use for portable applications such as in cycling helmets. The developed designs rely mainly on a suspended shuttle mass, which is used to implement one of two methods of actuation. The first relies on simple contact between the moving shuttle mass and a flexible electrode. In the second, the pull-in instability is induced by applying a voltage between a cantilever and an electrode, and then having the shuttle mass force the cantilever moving towards the electrode as it moves under the applied acceleration. Ten designs varying in their actuation method, suspension design, intended acceleration thresholds, and dimensions were modeled using a finite element model, fabricated, through the SOIMUMPs process, and then electrically and mechanically tested. Mechanical testing has been conducted using Drop-table tests and mechanical shakers. The simple contact devices were proven effective through shock test results showing triggering at two acceleration thresholds in two directions. Initial results also were promising for the pull-in based devices showing switching by moving their shuttle mass with a probe while applying appropriate voltage and observing under a microscope.

As computing power becomes more and more available, robotic systems are moving away from active sensors for environmental awareness and transitioning into passive vision sensors.  With the advent of teleoperation and real-time video tracking of dynamic environments, the need to stabilize video onboard mobile robots has become more prevalent. This thesis presents a digital stabilization method that incorporates inertial fusion with a Kalman filter.  The camera motion is derived visually by tracking SIFT features in the video feed and fitting them to an affine model.  The digital motion is fused with a 3 axis rotational motion measured by an inertial measurement unit (IMU) rigidly attached to the camera. The video is stabilized by digitally manipulating the image plane opposite of the unwanted motion. The result is the foundation of a robust video stabilizer comprised of both visual and inertial measurements.  The stabilizer is immune to dynamic scenes and requires less computation than current digital video stabilization methods. / Master of Science

Fall accidents are one of the most serious problems leading to unintentional injuries and fatalities among older adults. However, it is difficult to assess individuals' fall risk and to determine who are at risk of falls and in need of fall interventions. Therefore, this study was motivated by a need to provide a cogent fall risk assessment strategy that may be conducive to various wireless platforms. It aimed at developing a fall risk assessment method for evaluating individuals' fall risk by providing diagnostic modalities associated with gait. In this study, a "determinants of gait" model was adopted to analyze gait characteristics and associate them with fall risk. As a proof of concept, this study concentrated on slip-induced falls and the slip initiation risks. Two important parameters of determinants of gait, i.e. the pelvic rotation and the knee flexion, were found to be associated with slip initiation severity. This relationship appeared to be capable of differentiating fallers and non-fallers within older adults, as well as differentiating normal walking conditions and constrained walking conditions. Furthermore, this study also leveraged portable wireless sensor techniques and investigated if miniature inertial measurement units could effectively measure the important parameters of determinants of gait, and therefore assess slip and fall risk. Results in this study suggested that pelvic rotation and knee flexion measured by the inertial measurement units can be used as a substitution of the traditional motion capture system and can assess slip and fall risk with fairly good accuracy. As a summary, findings of this study filled the knowledge gap about how critical gait characteristics can influence slip and fall risk, and demonstrated a new solution to assess slip and fall risk with low cost and high efficiency. / Ph. D.

No description available.

Wearable computers and e-textiles are increasingly prevalent in today's society. Motion capture is one of many potential applications for on-body electronic systems. Self-contained motion capture applications require information from sensors distributed throughout the body on a "smart" garment. Therefore, this thesis presents the design of a flexible hardware platform for e-textile motion capture applications. This thesis also presents software for one such application, namely, tracking the pose or relative position of body limbs. The accuracy of this solution is compared to an industrial optical motion capture system. The combined hardware and software design are successful at collecting and processing motion capture data in the context of an e-textile jumpsuit. / Master of Science

Falls are the most frequent cause of unintentional injuries among older adults; afflicting 30 percent of persons aged 65 and older and more than 50 percent of persons aged 85 and older. There is a serious need for strategies to prevent falls in elderly individuals, but an important challenge in fall prevention is the paucity of objective evidence regarding the mechanisms that lead directly to falls. There exists no mechanisms about how to predict and manage elderly falls, which has multifactorial risk factors associated with its occurrence in the elderly. As the U.S. population continues to age, both the number of falls as well as the cost of treatment of fall injuries will continue to grow. Decades of research in fall prevention has not led to a decrease in the fall incidence; thus new strategies need to be introduced to understand and prevent falls. Aging reduces the adaptability of various physical and environmental stressors that hinder stability and balance maintenance and may therefore result in a fall. Movement variability in an individual's task performance can be used to assess the limitations of the movement control system. Maintaining variation in movement engenders flexible and adaptable modalities for elderly individuals to prevent falls in an unpredictable and ever changing external environment. Conversely, excessive variability of movement may drive the control system closer to its stability limits during balance and walking tasks. Accordingly, inertial sensors are an emerging wearable technology that can facilitate noninvasive monitoring of fall prone individuals in clinical settings. This research examined the potential of inertial sensors for use in clinical settings, and evaluated their effectiveness in comparison to mature laboratory systems (i.e., force platform and camera system). Study findings showed a relationship between movement variability and fall risk among healthy young and older adults. Further, the outcomes of this work translates to the clinical environment to better understand the health status (leading to frailty) of cardiac patients; reflected by the underlying adaptability of the control system, but requires further improvements if to be used as robust clinical tool. This research provides the groundwork for rapid clinical assessments in which its validity and robustness should be investigated in future efforts. / Ph. D.

The testing of unmanned vehicles presents a need for an independent device capable of accurately collecting position and orientation data. While commercial-off-the-shelf components could be pieced together to sense and record this information, this is an expensive, large, and heavy solution, not suitable for small or aerial vehicles. The micro wireless instrumented payload, or μWIP, was designed precisely for this purpose. The μWIP includes a GPS receiver, 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer which are used to measure an unmanned vehicle's position and orientation. The device also uses a secure digital card for data storage, and an 802.11b module to provide wireless connectivity. Additionally, the μWIP contains a on-board battery and the circuitry required to charge it. Firmware for the ARM7 processor was written to allow sensor calibration and data transmission, and a user interface was designed to run on a personal computer. The finished design is a tiny 3''x5''x1'', and weighs a mere 0.8 pounds including battery and antennas. It is capable of continuously streaming accurate GPS and inertial data over an 802.11b wireless network for over 5 hours. Having a bill of materials cost just over $600, the μWIP is also more cost effective than any alternative solutions. This thesis details the hardware and software design of the μWIP, as well as the initial testing, calibration, and evaluation of the device. / Master of Science

While the search for a practical fusion energy source has been pursued for decades, ultimate success remains elusive, and the need is apparent for continued research into alternative experimental fusion techniques. A method that has received fair attention over the past few years is Inertial Electrostatic Confinement (IEC) fusion, a system in which a convergent ion focus is obtained solely through electrostatic fields. During device operation where the electrostatic field is supported by very high voltages (over 20,000V), the resulting ion focus sustains a dense plasma capable of generating a high rate of fusion reactions and neutron production. However, present limited theoretical knowledge and engineering issues prevent the capacity ofIEC systems to produce net power. Rather, intermediate applications center on using the device as a portable neutron source. The work performed here involves an IEC device using spherical geometry, and includes the introduction of a new variable, the addition of high frequency electromagnetic (EM) fields into its operation. The goal is to predict theoretically, observe and explain any beneficial compressive effects of added microwave EM fields on the potential fusion reaction rate in an experimental reactor. An optical determination of the enhancement is performed while using lower voltages under 1 000V, and is based on the relative intensity of the confined plasma during glow discharge operation. It is hypothesized that imposing EM fields will enhance the potential fusion reaction rate conservatively by a factor of two. Presently, IEC systems operate just under neutron production levels needed for practical applications such as landmine detection and medical isotope production, and any enhancement from EM fields should prove highly beneficial.

This dissertation discusses the design, simulation and characterization of process-compatible accelerometers and gyroscopes for the implementation of multi-degree-of-freedom (multi-DOF) systems. All components presented herein were designed to operate under the same vacuum-sealed environment to facilitate batch fabrication and wafer-level packaging (WLP), enabling the development of small form-factor single-die inertial measurement units (IMUs). The high-aspect-ratio poly and single-crystal silicon (HARPSS) process flow was used to co-fabricate the devices that compose the system, enabling the implementation ultra-narrow capacitive gaps (< 300 nm) in thick device-layer substrates (40 um). The presented gyroscopes were implemented as high-frequency BAW disk resonators operating in a mode-matched condition. A new technique to reduced dependencies on environmental stimuli such as temperature, vibration and shock was introduced. Novel decoupling springs were utilized to effectively isolate the gyros from their substrate, minimizing the effect that external sources of error have on offset and scale-factor. The substrate-decoupled (SD) BAW gyros were interfaced with a customized IC to achieve supreme random-vibration immunity (0.012 (deg/s)/g) and excellent rejection to shock (0.075 (deg/s)/g). With a scale factor of 800 uV/(deg/s), the complete SD-BAW gyro system attains a large full-scale range (2500 deg/s) with excellent linearity. The measured angle-random walk (ARW) of 0.36 deg/rthr and bias-instability of 10.5 deg/hr are dominated by the thermal and flicker noise of the IC, respectively. Additional measurements using external electronics show bias-instability values as low as 3.5 deg/hr. To implement the final monolithic multi-DOF IMU, accelerometers were carefully designed to operate in the same vacuum environment required for the gyroscopes. Narrow capacitive gaps were used to adjust the accelerometer squeeze-film damping (SFD) levels, preventing an under-damped response. Robust simulation techniques were developed using finite-element analysis (FEA) tools to extract accurate values of SFD, which were then match with measured results. Ultra-small single proof-mass tri-axial accelerometers with Brownian-noise as low as 30 ug/rtHz were interfaced with front-end electronics exhibiting scale-factor values in the order of 5 to 10 mV/g and cross-axis sensitivities of less than 3% before any electronic compensation.