The subject of the diploma thesis is to prepare project documentation for the construction of a multifunctional building with almost zero energy consumption. The multifunctional building is located in the South Moravian Region on the outskirts of Rosice. It is a five-storey detached multifunctional building in a slightly sloping terrain, with one underground floor and four above-ground floors. The underground floor serves for the most part as a collective garage and also for the technical background of the building. There is a gym and showroom on the first floor. On the second and third floors there are office spaces with the necessary facilities. The remaining fourth floors are used for living, there are designed four residential units, with storage space for each apartment. The building is designed as a combined construction system, while the perimeter vertical load-bearing structures are lined with ceramic hollow blocks. The perimeter load-bearing walls in the basement are made of lost formwork. The vertical load-bearing structures inside the building consist mainly of reinforced concrete monolithic columns. The ceiling structures and longitudinal girders are also monolithic reinforced concrete. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The building is based on reinforced concrete monolithic foundation strips. The roof consists of a flat single-skin vegetation roof.

This diploma thesis deals with the design of an office building and the processing of project documentation for the construction. The office building is located in the Židenice in Brno, next to the Brno Židenice train station. This is a detached partly basement four-storey building with a flat roof. The underground floor serves primarily as a collective garage for 25 vehicles including parking spaces in the local stacking system. On the ground floor of the building there are three rentable spaces for retail with storage facilities and sanitary facilities for employees. The other of the building is used for administrative purposes. On the second above ground floor there are cell offices, on the third and fourth floors above ground the office spaces are rather as a open space. The construction system of the building is frameral with infill masonry made of ceramic fittings, the foundations are made of reinforced concrete slab and walls made of waterproof concrete. The foundations under the non-basement part are made of reinforced concrete foundation footing. Next to the office building, there are also eight parking spaces for shop visitors.

This work addresses the multifunkctional building in the cadastral of territory Křemže. The object is placed on flat terrain. The House has three floors, and no basement. The roof is classical, symmetrical, a saddle with a keel. The House has the shape of a rectangle with an extension of. The extension is a single-storey, rectangular-shaped object with a flat foot roof. Cladding of the facade forms the hanging wooden wall. The extension consists of facilities for staff of forest garden. The main building will be facilities for the sales department, administration, accounting, and management of the company.

The aim of the diploma thesis is the processing of project documentation for the construction of a multifunctional building. The building is situated on the outskirts of the village Brod nad Dyjí, on buildings plots 4002/4, 4138/1. The multifunctional building is divided into two parts, where the main part is four-storey, partly with a basement and the other part i sone-storey. In the basement are situated cellars, bicycle room, pram room, warehouses and technical room. In the ground floor is situated rentable retail space. In the second floor is situated six rentable office spaces of various sizes. There are housing units on the third and fourth floors. On each floor there are 8 residential units od size 1+kk, 2+kk, 3+kk and 4+kk. Both floors are identical in division. Each aparment and office space has at least one loggia. Theo ne-storey part of the building is a cafe in which there is an atrium. The perimeter walls of the basement are made of reinforced concrete, the other perimeter walls are made of ground brick blocks. The building is insulated with ETICS contact thermal insulation system. The ceiling structures are cross-reinforced monolithic reinforced concrete slabs. There is an elevatorin the multifinctional house. The roof of the four-storey part is a double-skin flat roof with sheet metal roofing. The roof on the single-storey part is a flat green roof with a waterproofing layer of asphalt strips. The staircase is a monolithic reinforced concrete slab. There is wall structural system.

The assignment of the diploma thesis is the elaboration of project documentation for the construction. It is a detached multifunctional house, which is located on a slightly sloping terrain. The building consists of four floors and is partially basement. In the basement of the building there are mainly storage spaces, which are designed for housing units located on the highest floors. The space of the first two floors consists mainly of commerce and there is a sports shop, massage equipment, hairdresser and office space. The building is based on simple concrete foundation strips. The perimeter masonry of the basement is made up of concrete blocks, which create lost formwork for concrete filling. The load-bearing masonry of the building consists mainly of ceramic blocks. The ceiling structures are made of Spiroll panels, which are complemented by reinforced concrete monolithic slabs. The building is insulated with the Etics contact insulation system. The roof is designed as a single-skin vegetation roof.

This aim of the diploma thesis is the design of hotel with restaurant, outdoor parking and garage in Brno - Kníničky, Hrázní street on sloping plot no. 3570 and 3571. The hotel is with partial basement and has five above-ground floors. The total capacity of the hotel is 99 guests in 50 guest rooms. Structural systém is cast-in-place concrete frame. Infill wall are from clay masonry Heluz. Partition is from plasterboard partition. External wall are with contact thermal insulation system. Part of the external wall have ventilated facade. Floor structure is from cast-in-place reinforced concrete floor. The roof is green roof. The outdoor parking consists of ten parking spaces, fice of which are barrier-free for people with reduced mobility. Residue parking spaces are in the garage opposite the hotel. From the side of the hotel are parking spaces for hotel staff. On plot are designed playground.

The subject of this diploma thesis is the project documentation of the new multifunctional building on the plot in Oslavany. The building is planted in the shape of a letter L.

The subject of the diploma thesis is the elaboration of project documentation for the construction of a kindergarten in Brno. The main entrance to the building is oriented to the north. The building is L-shaped and is designed as a two-storey, partly basement. There are 3 classes with a total of 72 children. External and internal load-bearing masonry of the above-ground floors is designed from ceramic blocks of thickness 300 mm. The basement masonry is then made of concrete blocks th. 300 mm cast in concrete. Internal non-load-bearing masonry made of ceramic blocks th. 115 mm. The insulation of the building is designed as a certified contact insulation system of EPS material. The horizontal load-bearing structures are designed as a ceramic prefabricated rib-and-filler floor with concrete grout. The stairs are designed as reinforced concrete monolithic. The roof is warm flat roof with an extensive vegetation layer.

This diploma thesis is focused on the design of a kindergarten and the processing of the design documentation for construction. The kindergarten is located on a large plot in a town Ostrava, an interface of boroughs Poruba and Třebovice. This object is free-standing with a partial basement. The building is divided into three functional objects – two single-storey parts and one double-storey part. There are two classes for the smallest children and a kitchen with a school canteen on the first floor. On the second above-ground floor there is a class for twenty-four children in early childhood. A class for pre-primary education and a principal’s office are also included. Vertical supporting structures in the above-ground floor are made of ceramic blocks Porotherm. In the basement there are reinforced concrete structures. Horizontal load-bearing structures are made of prestressed hollow core slabs Spiroll. The building is based on concrete strip foundations. Single-storey parts are roofed with a warm flat roof. The double-storey part is roofed with a cold flat roof with a timber truss girder. Close to the building there are two car parks – the first one is intended primarily for parents and teachers and the second one for personnel included cleaners and cooks.

The aim of the bachelor’s work is composition of project documentation for the construction building of boarding house. Object is situated on the cadastral area of village Kubšice, number of building plot is 30/7. Terain is slightly sloping. The pension has two above-ground and one underground floor. In the basement there are technical rooms. On the upper floors there are guest rooms and a restaurant with facilities. The construction system of the building is a wall system. The perimeter basement walls are made of concrete blocks of lost BEST formwork embedded in concrete. The other perimeter and interior walls are made of Heluz ceramic blocks. The building is designed to be insulated with an Etics contact facade made of mineral insulation from stone fibers. Horizontal ceiling structures and stairs are monolithic. The roof of the building consists of a sloping roof. There are 32 parking spaces on the plot.