Le propulseur PEGASES (Plasma Propulsion with Electronegative Gases) est un nouveau type de propulseur électrique pour la propulsion spatiale. Il utilise des ions négatifs et positifs créés par une décharge radiofréquence à couplage inductif pour générer la poussée. L’accélération électrostatique des ions est assurée par un ensemble de grilles polarisées. Un filtre magnétique est utilisé pour augmenter la quantité d'ions négatifs dans la cavité du propulseur. Le propulseur PEGASES est non seulement une source qui permet de créer un plasma d'ions négatifs à forte densité, et même un plasma d'ion-ion, mais il peut également être utilisé comme un propulseur ionique classique. Cela signifie qu'un plasma est créé dans un gaz électropositif (e.g. Xe) et que les ions positifs sont extraits et accélérés. Dans ce cas, il est nécessaire de neutraliser le plasma derrière la zone d'accélération, comme dans d'autres propulseurs ioniques. Les performances du propulseur PEGASES ont été étudiées principalement dans du xénon afin de comparer les résultats obtenus avec les propulseurs ioniques de type RIT. Le propulseur a été étudié à l'aide d'une série de sondes telles qu’une sonde de Langmuir, une sonde plane, une sonde capacitive et un RPA (pour Analyseur à Champ Retardateur). De plus, une sonde en champs croisés ExB a été développée pour mesurer la vitesse des ions quittant le propulseur ainsi que la fraction des différentes espèces ioniques présentes dans le plasma. / The PEGASES thruster (Plasma Propulsion with Electronegative Gases) is a novel type of electric thruster for space propulsion. It uses negative and positive ions produced by an inductively coupled radio frequency discharge to create the thrust by electrostatically accelerating the ions through a set of grids. A magnetic filter is used to increase the amount of negative ions in the cavity of the thruster. The PEGASES thruster is not only a source to create a strongly negative ion plasma or even an ion-ion plasma but it can also be used as a classical ion thruster. This means that a plasma is created and only the positive ions are extracted and accelerated making it necessary to neutralize the plasma behind the acceleration stage like in other ion thrusters. The performances of the PEGASES thruster have been investigated mainly in xenon in order to compare the obtained results with RIT-type ion thrusters. The thruster has been investigated with the help of a variety of probes such as a Langmuir probe, a planar probe, a capacitive probe and a RPA (Retarding Potential Analyzer). In addition, an ExB probe has been developed to measure the velocity of the ions leaving the thruster and to differentiate between the ion species present in the plasma.

A new particle-in-cell algorithm was developed for plasma simulations involving complex boundary conditions. The new algorithm is based on the three-dimensional immersed finite element method which is developed in this thesis, and a modified legacy particle-in-cell code. The model also applies a new meshing technique that separates the field solution mesh from the particle pushing mesh in order to increase the computational eciency of the model. The new simulation model is used in two applications of great importance to the development of ion propulsion technology: the ion optics performance and the interaction between spacecraft and the ion thruster. The first application is ion optics simulations. Simulations are performed to investigate ion optics plasma flow for a whole subscale NEXT ion optics. The operating conditions modeled cover the entire cross-over to perveance limit range. The results of the ion optics simulations demonstrated good agreement with the available experimental data. The second application is ion thruster plume simulations. Simulations are performed to investigate ion thruster plume - spacecraft interactions for the Dawn spacecraft. Plume induced contaminations on the solar array are studied for a variety of ion thruster configurations including multiple thruster firings. / Ph. D.

In order to enable comparison of Helicon ion thruster performance across different vacuum test facilities, an understanding of the effect of operating pressure on plasma plume properties is required. Plasma property measurements are compared for thruster operation at two separate vacuum facility operating pressures to determine the effect of neutral ingestion on Helicon ion thruster operation. The ion energy distribution function (IEDF), electron temperature, ion number density, and plasma potential are measured along the thruster main axis for a replica of the Madison Helicon eXperiment. Plasma property values recorded at the ‘high-pressure condition’ (3.0×10^(-4) Torr corrected for argon) are compared to values recorded at the ‘low-pressure condition’ (1.2×10^(-5) Torr corrected for argon) for thruster operation at 100 - 500 watts radio frequency forward power, 340 – 700 gauss source region magnetic field strength, and 1.3 - 60 sccm argon volumetric flow rate (0.039-1.782 mg/s). Differences in plasma behavior at the ‘high-pressure condition’ result from two primary neutral-plume interactions: collisions between accelerated beam ions and ingested neutrals leading to a reduction of ion energy and neutral ionization downstream of the thruster exit due to electron-neutral collisions. Electron temperature at higher operating pressures is lowered due to an electron cooling effect resulting from repeated collisions with neutral atoms. Results suggest that Helicon ion thruster plasma properties are greatly influenced when subjected to neutral ingestion.

The PEGASES thruster (Plasma Propulsion with Electronegative Gases) is a novel type of electric thruster for space propulsion. It uses negative and positive ions produced by an inductively coupled radio frequency discharge to create the thrust by electrostatically accelerating the ions through a set of grids. A magnetic filter is used to increase the amount of negative ions in the cavity of the thruster. The PEGASES thruster is not only a source to create a strongly negative ion plasma or even an ion-ion plasma but it can also be used as a classical ion thruster. This means that a plasma is created and only the positive ions are extracted and accelerated making it necessary to neutralize the plasma behind the acceleration stage like in other ion thrusters. The performances of the PEGASES thruster have been investigated mainly in xenon in order to compare the obtained results with RIT-type ion thrusters. The thruster has been investigated with the help of a variety of probes such as a Langmuir probe, a planar probe, a capacitive probe and a RPA (Retarding Potential Analyzer). In addition, an ExB probe has been developed to measure the velocity of the ions leaving the thruster and to differentiate between the ion species present in the plasma.

Modern gridded ion thrusters for CubeSats operate by generating high power and canpose challenging problems with Electromagnetic Interference (EMI). In order to verifycompatibility with neighbouring equipment, strict standards such as the militarystandard MIL-STD-461G, are required to be followed to achieve ElectromagneticCompatibility (EMC). To avoid abrupt and cataclysmic delays in production time, incase the product fails to comply with the requirements, companies integrate in-housepre-compliance tests into their development phase. The objective is to implementin-house measurement methods on an electric propulsion model NPT30 developedby ThrustMe. This document explains the process and methods to perform conductedemission test on power lines and radiated emission tests in the magneticfield. A custom measurement system integrity verification was developed for theradiated emission test. The presented results provide the engineers at ThrustMe aninsight on the electromagnetic behaviour on the ion thruster NPT30 and whethermodifications need to be included in the next development iteration to mitigate forthe detected excessive emission levels. When EMC methods are implemented earlyon in the development process, there are more pre-emptive mitigation options withless costs in time and money. By performing in-house pre-compliance tests andtaking measures to prepare for the tests at a certified EMC test house, the companycan be more confident in their product at passing the EMC tests. Based on the twoperformed in-house tests, the engineers at ThrustMe began to include mitigationmethods in the following circuit design iterations.

High Efficiency Multistage Plasma Thrusters (HEMPTs) are a relatively new form of electric propulsion that show promise for use on a variety of missions and have several advantages over their older EP competitors. One such advantage is their long predicted lifetime and minimal wall erosion due to a unique periodic permanent magnet system. A laboratory HEMPT was built and donated by JPL for testing at Cal Poly. Previous work was done to characterize the performance of this thruster and it was found to exhibit a large plume divergence, resulting in decreased thrust and specific impulse. This thesis explores the design and application of a magnetic shield to modify the thruster’s magnetic field to force more ion current towards the centerline. A previous Cal Poly thesis explored the same concept, and that work is continued and furthered here. The previous thesis tested a shield which increased centerline current but decreased performance. A new shield design which should avoid this performance decrease is studied here. Magnetic modelling of the thruster was performed using COMSOL. This model was verified using guassmeters to measure the field strength at many discrete points within and near the HEMPT, with a focus on the ionization channel and exit plane. A shield design which should significantly reduce the radial field strength at the exit plane without affecting the ionization channel field was modelled and implemented. The HEMPT was tested in a vacuum chamber with and without the shield to characterize any change to performance characteristics. Data were collected using a nude Faraday probe and retarding potential analyzer. The data show a significant increase in centerline current with the application of the shield, but due to RPA malfunction and thruster failure the actual change in performance could not be concluded. The unshielded HEMPT was characterized, however, and was found to produce 12.1 +/- 1.3 mN of thrust with a specific impulse of 1361 +/- 147s. The thruster operated with a total efficiency of 10.63 +/- 3.66%, an efficiency much lower than expected. A large contributor to this low efficiency is likely the use of argon in place of xenon. Its lower mass and higher ionization energy make it a less efficient propellant choice. Further, the thruster is prone to overheating, indicating that significant thermal losses are present in this design.

Over the last decade, miniature ion thruster development has remained an active area of research do to its low power, low thrust, and high efficiency, however, due to several technical issues; a flight level miniature ion thruster has proved elusive. This thesis covers the design, fabrication, assembly, and test of an altered version of the Miniature Xenon Ion thruster (MiXI), originally developed by lead engineer Dr. Richard Wirz, at the California Institute of Technology (Caltech). In collaboration with Dr. Wirz, MiXI-CP-V3 was developed at Cal Poly San Luis Obispo with the goal of implementing of a ¼ inch hollow cathode and 3mmx3mm plasma confinement magnets in order to improve the plasma confinement characteristics, reliability, and performance of the MiXI design. Operational testing revealed a mass utilization efficiency of 35-75% and a discharge loss of 550-1200 eV/ion over plasma discharge currents of 0.5-1.5A and propellant flow rates of 0.8-1.3 SCCM. Testing revealed that the MiXI thruster can be operated with a hollow cathode and observations and data gained from this study have led to a greater understanding of the operational parameters of the MiXI thruster, and will contribute to the development and advancement of the MiXI baseline design, with the goal of creating an efficient and reliable flight level miniature ion thruster.

No description available.

There has been a sharp increase in the market for electric propulsion systems for small satellites in the recent years. Electric propulsion systems have become smaller, more efficient and cheaper, which made them ideal for small satellites because they have a low thrust requirement and benefit significantly from the high specific impulse (Isp) that is characteristic to electric thrusters. These thrusters are generally fabricated and tested manually and there is a low degree of automation in the process. As the demand for the thrusters increases, there is a need to improve the speed of the fabrication and testing process. The Test Platform for Electronics Modules in Electric Thrusters (TESPEMET) project at ThrustMe is an attempt to design a system that addresses this issue. The vision is to have a test platform that facilitates the testing of ThrustMe's Electric Thrusters by applying various source and load conditions, emulating events while performing instrumentation during the test process and generating a test report at the end of the test procedure. The development of such a test platform would enable and accelerate the test and qualification process of the thrusters significantly. This thesis presents the technical design of this test platform along with the results obtained, encountered problems and solutions. Future work and design changes have also been proposed based on the knowledge gained during the Research and Development process.

A computational model of the micro-ion thruster MiXI has been developed, analyzed, and partially verified. This model includes submodels that govern the physical, magnetic, electrostatic, plasma physics, and power deposition of the thruster. Over the past few years, theses have been conducted with the goal of running tests and analyzing the results; this model is used to understand how the thruster components interact so as to make predictions about, and allow for optimization of, the thruster operation. Testing is then performed on the thruster and the results are compared to the output of the code. The magnetic structure of the thruster was analyzed and numerous different configurations generated which were also evaluated by the optimizer and tested. Using the different configurations, models, and optimization tools, the total efficiency of the thruster is theoretically able to reach 69.4%. Operational testing of the thruster at many different throttle settings demonstrated a maximum total efficiency of 45.9 ±24.6%, discharge loss values as low as 109 ±25 eV/ion, and total power required as low as 50.5 ±0.1W to maintain thruster operation with beam extraction. Measurements of the plasma were taken using a Langmuir probe and the interpretation of the tests are used to verify the plasma physics submodel. Power draw measurements and analysis of the throttle inputs during testing are compared to the performance model outputs but were not accurate or consistent enough to fully verify the power deposition and plasma physics models. Analysis of the models and operational testing in this study have led to an increased understanding of the performance and operation of the MiXI-CP-V3 thruster, furthering the effort to create an efficient, flight capable micro-ion thruster.