1 |
Analysis-ready isogeometric model of skeletal musclesBoss, Matthew John 01 May 2012 (has links)
New methods are employed to develop an anatomically accurate, analysis-ready isogeometric model of skeletal muscles. Current modeling techniques for the analysis of skeletal muscles include the utilization of finite element meshing, which inherently poses a few well-known problems that provide motivation for isogeometric analysis. In addition to those issues, standard FEA meshing cannot preserve smooth geometries, therefore the accuracy of the foregoing model and analysis is reduced. Moreover, there is no easy means to characterize fiber direction in the FEA framework due to discontinuities at element boundaries. Additionally, material property distributions such as the transition of the muscle-tendon complex along the longitudinal axis through FEA are prescribed on an element by element basis, leading to abrupt, unrealistic property changes at element boundaries. The current research builds on the idea of an isogeometric tensor-product rod using harmonic coordinates and NURBS [1]. Through a direct comparison between a meshed, FEA model and the tensor-product rod model, it can be shown that the tensor-product rod model preserves smoothness, enhancing the geometric representation passed through to analysis while reducing the total DOF of the model. Muscle fibers can be easily implemented as parametric lines with muscle-specific orientations along the muscles' longitudinal axis that match distinct fiber orientations existent within common skeletal muscles. This technique not only allows for the representation of perfectly parallel-fibered structures, but also those that do not directly follow the longitudinal axis such as a helical twist. Utilizing this geometric method also provides the framework for implementing material properties using an interpolative-style scheme. Varying properties at specific longitudinal control point cross-sections near muscle termination areas can be designated to more accurately represent the muscle-tendon complex. These new techniques allow for the creation of an analysis-ready, realistic skeletal muscle model of the male human arm. The model contains 28 muscles complete with muscle-specific geometric, fiber, and heterogeneous property characterizations all compiled into a complete "digital muscle library."
|
2 |
Mixed Galerkin and least-squares formulations for isogeometric analysisKadapa, Chennakesava January 2014 (has links)
This work is concerned with the use of isogeometric analysis based on Non- Uniform Rational B-Splines (NURBS) to develop efficient and robust numerical techniques to deal with the problems of incompressibility in the fields of solid and fluid mechanics. Towards this, two types of formulations, mixed Galerkin and least-squares, are studied. During the first phase of this work, mixed Galerkin formulations, in the context of isogeometric analysis, are presented. Two-field and three-field mixed variational formulations - in both small and large strains - are presented to obtain accurate numerical solutions for the problems modelled with nearly incompressible and elasto-plastic materials. The equivalence of the two mixed formulations, for the considered material models, is derived; and the computational advantages of using two-field formulations are illustrated. Performance of these formulations is assessed by studying several benchmark examples. The ability of the mixed methods, to accurately compute limit loads for problems involving elastoplastic material models; and to deal with volumetric locking, shear locking and severe mesh distortions in finite strains, is illustrated. Later, finite element formulations are developed by combining least-squares and isogeometric analysis in order to extract the best of both. Least-squares finite element methods (LSFEMs) based on the use of governing differential equations directly - without the need to reduce them to equivalent lower-order systems - are developed for compressible and nearly incompressible elasticity in both the small and finite strain regimes; and incompressible Navier-Stokes. The merits of using Gauss-Newton scheme instead of Newton-Raphson method to solve the underlying nonlinear equations are presented. The performance of the proposed LSFEMs is demonstrated with several benchmark examples from the literature. Advantages of using higher-order NURBS in obtaining optimal convergence rates for non-norm-equivalent LSFEMs; and the robustness of LSFEMs, for Navier-Stokes, in obtaining accurate numerical solutions without the need to incorporate any artificial stabilisation techniques, are demonstrated.
|
3 |
Deterministic and Random Isogeometric Analysis of Fluid Flow in Unsaturated SoilsShahrokhabadi, Shahriar 08 December 2017 (has links)
The main objective of this research is to use IGA as an efficient and robust alternative for numerical simulation of unsaturated seepage problems. Moreover, this research develops an IGA-based probabilistic framework that can properly account for the variability of soil hydraulic properties in the simulations. In the first part, IGA is used in a deterministic framework to solve a head-based form of Richards’ equation. It is shown that IGA is able to properly simulate changes in pore pressure at the soils interface. In the second part of this research, a new probabilistic framework, named random IGA (RIGA), is developed. A joint lognormal distribution function is used with IGA to perform Monte Carlo simulations. The results depict the statistical outputs relating to seepage quantities and pore water pressure. It is shown that pore water pressure, flow rate, etc. change considerably with respect to standard deviation and correlation of the model parameters.
|
4 |
U-Splines: Splines Over Unstructured MeshesSchmidt, Steven K. 30 March 2022 (has links)
U-splines are a novel approach to the construction of a spline basis for representing smooth objects in Computer-Aided Design (CAD) and Computer-Aided Engineering (CAE). A spline is a piecewise-defined function that satisfies continuity constraints between adjacent cells in a mesh. U-splines differ from existing spline constructions, such as Non-Uniform Rational B-splines (NURBS), subdivision surfaces, T-splines, and hierarchical B-splines, in that they can accommodate local variation in cell size, polynomial degree, and smoothness simultaneously over more varied mesh configurations. Mixed cell types (e.g., triangle and tetrahedron and quadrilateral and hexahedral cells in the same mesh) and T-junctions are also supported. The U-spline construction is presented for curves, surfaces, and volumes with higher dimensional generalizations possible. A set of requirements are given to ensure that the U-spline basis is positive, forms a partition of unity, is complete, and is locally linearly independent.
|
5 |
Cloth simulation by isogeometric analysisZheng, Chao 01 December 2013 (has links)
This thesis aims to develop a design-oriented simulation approach for cloth analysis. Our approach is built on the framework of NURBS-based isogeometric analysis, which utilizes NURBS as the basis functions of analysis. NURBS is a class of parametric geometry to represent curves and surfaces in computer-aided design (CAD) programs. Recently, NURBS geometry has been used directly in analysis. The overall goal of this thesis is to develop a computation infrastructure that enables cloth analysis directly on NURBS geometry.
The advantage of NURBS in the context of cloth modeling lies in the geometric smoothness. Using NURBS, it's easy to construct surfaces with C1 or higher order of continuity. Compared to C0 finite element geometry, the NURBS geometry is more effective in capturing wrinkles and folders of cloth, which are characteristics of cloth motion. The NURBS geometry enables the use of rotation-free Kirchhoff-Love shell. The rotation-free shell model not only saves freedoms, but also makes the contact/impact treatment much easier.
The major contribution of this work is the development of a NURBS cloth modeling approach. The mechanical model of cloth and its implementation with NURBS geometry will be presented in detail. Proper constitutive laws are employed for fabric materials. Since NURBS geometry from CAD typically contains multiple patches and trimmed patches, a certain treatment is proposed so that geometry can be used directly in analysis.
Another contribution of this work relates to a contact/impact algorithm. Contact problems in cloth simulation have been a bottleneck of continuum-based approach. Since the general contact method doesn't work well for cloth simulation, a special contact treatment is developed. The present contact model distinguishes three types of contact interactions. The first is the persistent contact force. This force in essence is the traditional penalty force, but is applied when a contact pair is within a separation tolerance instead of being penetrated. This essentially smears the abrupt contact reaction into a relatively smooth force defined only a small thickness. The second is trajectory impact, which deals with the reaction when impact occurs in a time step. The treatment ensures that a point stays on a same side of the surface it impacts on. The third is self-intersection. Intersection resorting force is introduced when the initial configuration has self-intersections, or when the trajectory impact force fails to eliminate all the collisions. We proposed a new method, the method of area minimization, to handle intersections.
The contact models have been integrated into an operator-split integration algorithm. A notable feature of this integration is that the contact/impact response is singled out from the momentum equation.
This work also proposes a continuum-based strain limiting scheme. Because the in-plane stiffness of cloth is much higher than the bending stiffness, numerical difficulty is encountered in either implicit or explicit time integration. The strain limiting is a numerical technique that formulates the in-plane response as a constraint problem to allow the use of lower in-plane stiffness.
A number of examples are presented to show the performance of the proposed approach. In the wrinkling study, the simulated wrinkle pattern looks similar with the experimental results. In the contact study, it is found that the current method can accurately recover a constant contact pressure field (press patch test), can handle contacts of multi-layer folds and produce realistic draping effect. The intersection resolution method is illustrated to be robust to various kinds of intersections. The fast projection method can enlarge time steps while limiting the in-plane strain.
The current method is also applied to the analysis of a soft armor. Beginning from CAD models the armor was put on the human body by a try-on simulation. In multi-layer models, the intersection resolution method is used to resolve the intersections between layers. Subsequently, cloth dynamics are simulated for different human motions. Mechanical indexes such as the extra torque caused by the armors, pressure force on the body, and stress in the armor are predicted. Parametric studies are performed to investigate the change in mechanical metrics under altered design parameters.
|
6 |
Isogeometric Analysis of Thermo-Hydro-Mechanical Processes in Variably Saturated SoilsShahrokhabadi, Shahriar 10 August 2018 (has links)
The main objective of this research is to present a robust numerical framework based upon Isogeometric analysis (IGA) for simulation of thermo-hydro-mechanical (THM) processes in variably saturated soils. The proposed platform employs the Bézier extraction operator to connect IGA to the conventional finite element analysis (FEA), allowing to take advantage of features offered by the two methods. In the first part, the formulation and numerical implementation for fully coupled numerical simulation of THM problems in saturated porous media are presented. The results are compared against analytical solutions and experimental tests available in the literature. In the second part, the proposed method is used to study the temperature effect on the hydro-mechanical response of sd supporting hydrocarbon pipelines, an aspect that has been overlooked in the majority of previous studies. The results highlight the need for considering nonisothermal behavior in different analysis and design stages of sd-buried pipelines. In the third part, the proposed IGA-FEA framework is extended to evaluate the nonisothermal elasto-plastic behavior of unsaturated soils. Drucker-Prager yield surface is used as criterion to limit the modified effective stress where the model follows small strain, quasi-static loading conditions. The framework is used to simulate strain localization of unsaturated dense sand subjected to undrained compression loading. In comparison with FEA, the present method smoothly distributes plastic strain over the adjacent elements. The parametric study highlights the importance of considering temperature effects in elasto-plastic analysis of unsaturated soils.
|
7 |
Application of an Isogeometric Boundary Element Method to the Calculation of Acoustic Radiation Modes and Their EfficienciesHumpherys, Candice Marie 01 June 2014 (has links) (PDF)
In contrast to the structural modes, which describe the physical motion of vibrating structures, acoustic radiation modes describe the radiated sound power. Radiation modes are beneficial in active noise control because reducing an efficiently radiating radiation mode guarantees the reduction of radiated sound power. Much work has been done to calculate the radiation modes for simple geometries, where analytic solutions are available. In this work, isogeometric analysis (IGA) is used to provide a tool capable of analyzing the radiation modes of arbitrarily complex geometries. IGA offers increased accuracy and efficiency by using basis functions generated from Non-Uniform Rational B-Splines (NURBS) or T-Splines, which can represent geometries exactly. Results showing this increased accuracy and efficiency with IGA using T-Splines are shown for a sphere to validate the method, comparing with the exact analytical solution as well as results from a traditional boundary element method. A free cylindrical shell is also analyzed to show the usefulness of this method. Expected similarities, as well as expected differences, are observed between this free shell and a baffled cylindrical shell.
|
8 |
Isogeometric Shell Analysis: Multi-patch Coupling and Overcoming LockingZou, Zhihui 08 April 2020 (has links)
The fundamental advantages of applying Isogeometric Analysis (IGA) to shell analysis have been extensively demonstrated across a wide range of problems and formulations. However, a phenomenon called numerical locking is still a major challenge in IGA shell analysis, which can lead to dramatically deteriorated analysis accuracy. Additionally, for complex thin-walled structures, a simple and robust coupling technique is desired to sew together models composed of multiple patches. This dissertation focuses on addressing these challenges of IGA shell analysis. First, an isogeometric dual mortar method is developed for multi-patch coupling. This method is based on Be ?zier extraction and projection and can be employed during the creation and editing of geometry through properly modified extraction operators. It is applicable to any spline space which has a representation in Be ?zier form. The error in the method can be adaptively controlled, in some cases recovering optimal higher-order rates of convergence, by leveraging the exact refineability of the proposed dual spline basis without introducing any additional degrees-of-freedom into the linear system. This method can be used not only for shell elements but also for heat transfer and solid elements, etc. Next, a mixed formulation for IGA shell analysis is proposed that addresses both shear and membrane locking and improves the quality of computed stresses. The starting point of the formulation is the modified Hellinger-Reissner variational principle with independent displacement, membrane, and shear strains as the unknown fields. To overcome locking, the strain variables are interpolated with lower-order spline bases while the variations of the strain variables are interpolated with the proposed dual spline bases. As a result, the strain variables can be condensed out of the system with only a slight increase in the bandwidth of the resulting linear system and the condensed approach preserves the accuracy of the non-condensed mixed approach but with fewer degrees-of-freedom. Finally, as an alternative, new quadrature rules are developed to release membrane and shear locking. These quadrature rules asymptotically only require one point for Reissner-Mindlin (RM) shell elements and two points for Kirchhoff-Love (KL) shell elements in B-spline and NURBS-based isogeometric shell analysis, independent of the polynomial order p of the elements. The quadrature points are Greville abscissae and the quadrature weights are calculated by solving a linear moment fitting problem in each parametric direction. These quadrature rules are free of spurious zero-energy modes and any spurious finite-energy modes in membrane stiffness can be easily stabilized by using a higher-order Greville rule.
|
9 |
Parametric Structural Optimization of a Wheel Using the Flex Representation MethodVernon, Gregory John 13 December 2022 (has links)
The use of the finite element method within an optimization workflow is fraught with challenges that limit the automation of such workflows. These challenges are inherent to the traditional finite element formulations which are heavily dependent on a manual meshing process that introduces variability that is challenging to account for within an automated workflow. The recently developed flex representation method (FRM) provides a salient solution to the manual meshing process without sacrificing solution accuracy. In response to the development of FRM a global automotive company requested a study to explore the applicability of FRM to one of their sizing-optimization problems: the constrained optimization of a wheel undergoing a rigidity test. In this study we develop an optimization framework based on the DAKOTA optimization framework, the open-source FreeCAD computer-aided design software, and an implementation of FRM within the Coreform IGA solver. Within this framework we demonstrate in the affirmative that FRM enables a highly robust sizing-optimization workflow while requiring minimal effort to prepare the FRM model.
|
10 |
Thermomechanical and Vibration Analysis of Stiffened Unitized Structures and Threaded FastenersDevarajan, Balakrishnan 01 February 2019 (has links)
This dissertation discusses the thermomechanical analyses performed on threaded fasteners and curvilinearly stiffened composite panels with internal cutouts. The former problem was analyzed using a global/local approach using the commercial finite element software ANSYS while a fully functional code using isogeometric analysis was developed from scratch for the latter. For the threaded fasteners, a global simplified 3D model is built to evaluate the deformation of the structure. A second local model reproducing accurately the threads of the fasteners is used for the accurate assessment of the stresses in the vicinity of the fasteners. The isogeometric analysis code, capable of performing static, buckling and vibration analysis on stiffened composite plates with cutouts using single patch, multiple patches and level set methods is then discussed. A novel way to achieve displacement compatibility between the panel and stiffeners interfaces is introduced. An easy way of modeling plates with complicated cutouts by using edge curves and generating a ruled NURBS surface between them is described. Influence on the critical thermal buckling load and the fundamental mode of vibration due to the presence of circular, elliptical and complicated cutouts is also investigated. Results of parametric studies are presented which show the influence of ply orientation, size and orientation of the cutout, and the position and profile of the curvilinear stiffener.
The numerical examples show high reliability and efficiency when compared with other published solutions and those obtained using ABAQUS, a commercial software. / PHD / Aircraft in flight are subjected to different loads due to maneuvers and gust; there external forces cause internal loads and depend on the location of the panel in the aircraft. The internal loads, may result in the buckling of the panel. Hence, there is a need for studying structural efficiency and develop strong and stiff lightweight structures. Stiffened composite panels is a technology capable of addressing these needs. However, when used in space vehicles moving at hypersonic speeds, such structures experience significant temperature rise in a very short time resulting from the aerodynamic heating due to friction between the vehicle surface and the atmosphere. Such phenomena is more prominent during reentry and launch processes. Hence, it is really important to consider thermal effects while designing and analyzing such structures. Composite stiffened panels have many advantages like small manufacturing cost, high stability, great energy absorption, superior damage tolerance etc. One of the main failure modes for stiffened composite panels is thermal buckling. An extensive literature review on thermal buckling of stiffened composite panels was conducted in this dissertation. Thermal buckling and vibration analysis as well as a parametric study of a stiffened composite panel with internal cutouts was conducted, and verified using ABAQUS, a Finite Element Software.
|
Page generated in 0.1625 seconds