Spelling suggestions: "subject:"point source""
21 |
Low-delay sensing and transmission in wireless sensor networksKarlsson, Johannes Unknown Date (has links)
<p>With the increasing popularity and relevance of ad-hoc wireless sensor networks, cooperative transmission is more relevant than ever. In this thesis, we consider methods for optimization of cooperative transmission schemes in wireless sensor networks. We are in particular interested in communication schemes that can be used in applications that are critical to low-delays, such as networked control, and propose suitable candidates of joint source-channel coding schemes. We show that, in many cases, there are significant gains if the parts of the system are jointly optimized for the current source and channel. We especially focus on two means of cooperative transmission, namely distributed source coding and relaying.</p><p>In the distributed source coding case, we consider transmission of correlated continuous sources and propose an algorithm for designing simple and energy-efficient sensor nodes. In particular the cases of the binary symmetric channel as well as the additive white Gaussian noise channel are studied. The system works on a sample by sample basis yielding a very low encoding complexity, at an insignificant delay. Due to the source correlation, the resulting quantizers use the same indices for several separated intervals in order to reduce the quantization distortion.</p><p>For the case of relaying, we study the transmission of a continuous Gaussian source and the transmission of an uniformly distributed discrete source. In both situations, we propose design algorithms to design low-delay source-channel and relay mappings. We show that there can be significant power savings if the optimized systems are used instead of more traditional systems. By studying the structure of the optimized source-channel and relay mappings, we provide useful insights on how the optimized systems work. Interestingly, the design algorithm generally produces relay mappings with a structure that resembles Wyner-Ziv compression.</p>
|
22 |
Optimal Multiresolution Quantization for Broadcast Channels with Random Index AssignmentTeng, Fei 06 August 2010 (has links)
Shannon's classical separation result holds only in the limit of infinite source code dimension and infinite channel code block length. In addition, Shannon theory does not address the design of good source codes when the probability of channel error is nonzero, which is inevitable for finite-length channel codes. Thus, for practical systems, a joint source and channel code design could improve performance for finite dimension source code and finite block length channel code, as well as complexity and delay.
Consider a multicast system over a broadcast channel, where different end users typically have different capacities. To support such user or capacity diversity, it is desirable to encode the source to be broadcasted into a scalable bit stream along which multiple resolutions of the source can be reconstructed progressively from left to right. Such source coding technique is called multiresolution source coding. In wireless communications, joint source channel coding (JSCC) has attracted wide attention due to its adaptivity to time-varying channels. However, there are few works on joint source channel coding for network multicast, especially for the optimal source coding over broadcast channels.
In this work, we aim at designing and analyzing the optimal multiresolution vector quantization (MRVQ) in conjunction with the subsequent broadcast channel over which the coded scalable bit stream would be transmitted. By adopting random index assignment (RIA) to link MRVQ for the source with superposition coding for the broadcast channel, we establish a closed-form formula of end-to-end distortion for a tandem system of MRVQ and a broadcast channel. From this formula we analyze the intrinsic structure of end-to-end distortion (EED) in a communication system and derive two necessary conditions for optimal multiresolution vector quantization over broadcast channels with random index assignment. According to the two necessary conditions, we propose a greedy iterative algorithm for jointly designed MRVQ with channel conditions, which depends on the channel only through several types of average channel error probabilities rather than the complete knowledge of the channel. Experiments show that MRVQ designed by the proposed algorithm significantly outperforms conventional MRVQ designed without channel information.
By building an closed-form formula for the weighted EED with RIA, it also makes the computational complexity incurred during the performance analysis feasible. In comparison with MRVQ design for a fixed index assignment, the computation complexity for quantization design is significantly reduced by using random index assignment. In addition, simulations indicate that our proposed algorithm shows better robustness against channel mismatch than MRVQ design with a fixed index assignment, simply due to the nature of using only the average channel information. Therefore, we conclude that our proposed algorithm is more appropriate in both wireless communications and applications where the complete knowledge of the channel is hard to obtain.
Furthermore, we propose two novel algorithms for MRVQ over broadcast channels. One aims to optimize the two corresponding quantizers at two layers alternatively and iteratively, and the other applies under the constraint that each encoding cell is convex and contains the reconstruction point. Finally, we analyze the asymptotic performance of weighted EED for the optimal joint MRVQ. The asymptotic result provides a theoretically achievable quantizer performance level and sheds light on the design of the optimal MRVQ over broadcast channel from a different aspect.
|
23 |
Joint Source Channel Coding in Broadcast and Relay Channels: A Non-Asymptotic End-to-End Distortion ApproachHo, James January 2013 (has links)
The paradigm of separate source-channel coding is inspired by Shannon's separation result, which implies the asymptotic optimality of designing source and channel coding independently from each other. The result exploits the fact that channel error probabilities can be made arbitrarily small, as long as the block length of the channel code can be made arbitrarily large. However, this is not possible in practice, where the block length is either fixed or restricted to a range of finite values. As a result, the optimality of source and channel coding separation becomes unknown, leading researchers to consider joint source-channel coding (JSCC) to further improve the performance of practical systems that must operate in the finite block length regime. With this motivation, this thesis investigates the application of JSCC principles for multimedia communications over point-to-point, broadcast, and relay channels. All analyses are conducted from the perspective of end-to-end distortion (EED) for results that are applicable to channel codes with finite block lengths in pursuing insights into practical design.
The thesis first revisits the fundamental open problem of the separation of source and channel coding in the finite block length regime. Derived formulations and numerical analyses for a source-channel coding system reveal many scenarios where the EED reduction is positive when pairing the channel-optimized source quantizer (COSQ) with an optimal channel code, hence establishing the invalidity of the separation theorem in the finite block length regime. With this, further improvements to JSCC systems are considered by augmenting error detection codes with the COSQ. Closed-form EED expressions for such system are derived, from which necessary optimality conditions are identified and used in proposed algorithms for system design. Results for both the point-to-point and broadcast channels demonstrate significant reductions to the EED without sacrificing bandwidth when considering a tradeoff between quantization and error detection coding rates. Lastly, the JSCC system is considered under relay channels, for which a computable measure of the EED is derived for any relay channel conditions with nonzero channel error probabilities. To emphasize the importance of analyzing JSCC systems under finite block lengths, the large sub-optimality in performance is demonstrated when solving the power allocation configuration problem according to capacity-based formulations that disregard channel errors, as opposed to those based on the EED.
Although this thesis only considers one JSCC setup of many, it is concluded that consideration of JSCC systems from a non-asymptotic perspective not only is more meaningful, but also reveals more relevant insight into practical system design. This thesis accomplishes such by maintaining the EED as a measure of system performance in each of the considered point-to-point, broadcast, and relay cases.
|
24 |
Robust Lossy Source Coding for Correlated Fading ChannelsSHAHIDI, SHERVIN 28 September 2011 (has links)
Most of the conventional communication systems use channel interleaving as well as hard decision decoding in their designs, which lead to discarding channel memory and soft-decision information. This simplification is usually done since the complexity of handling the memory or soft-decision information is rather high.
In this work, we design two lossy joint source-channel coding (JSCC) schemes that do not use explicit algebraic channel coding for a recently introduced channel model, in order to take advantage of both channel memory and soft-decision information.
The channel model, called the non-binary noise discrete channel with queue based noise (NBNDC-QB), obtains closed form expressions for the channel transition distribution, correlation coefficient, and many other channel properties. The channel has binary input and $2^q$-ary output and the noise is a $2^q$-ary Markovian stationary ergodic process, based on a finite queue, where $q$ is the output's soft-decision resolution.
We also numerically show that the NBNDC-QB model can effectively approximate correlated Rayleigh fading channels without losing its analytical tractability. The first JSCC scheme is the so called channel optimized vector quantizer (COVQ) and the second scheme consists of a scalar quantizer, a proper index assignment, and a sequence maximum a posteriori (MAP) decoder, designed to harness the redundancy left in the quantizer's indices, the channel's soft-decision output, and noise time correlation. We also find necessary and sufficient condition when the sequence MAP decoder is reduced to an instantaneous symbol-by-symbol decoder, i.e., a simple instantaneous mapping. / Thesis (Master, Electrical & Computer Engineering) -- Queen's University, 2011-09-25 19:43:28.785
|
25 |
On joint source-channel decoding and interference cancellation in CDMA-based large-scale wireless sensor networksIllangakoon, Chathura 26 May 2013 (has links)
Motivated by potential applications in wireless sensor networks, this thesis considers the problem of communicating a large number of correlated analog sources over a Gaussian multiple-access channel using non-orthogonal code-division multiple-access (CDMA). A joint source-channel decoder is presented which can exploit the inter-source correlation for interference reduction in the CDMA channel. This decoder uses a linear minimum mean square error (MMSE) multi-user detector (MUD) in tandem with a MMSE joint source decoder (JSD) for multiple sources to achieve a computational complexity that scales with the number of sources. The MUD and the JSD, then iteratively exchange extrinsic information to improve the interference cancellation. Experimental results show that, compared to a non-iterative decoder, the proposed iterative decoder is more robust against potential performance degradation due to correlated channel interference and offers better near far resistance.
|
26 |
Low Density Parity Check Code Designs For Distributed Joint Source-Channel Coding Over Multiple Access ChannelsShahid, Iqbal 23 August 2013 (has links)
The efficient and reliable communication of data from multiple sources to a single receiver plays an important role in emerging applications such as wireless sensor networks. The correlation among observations picked-up by spatially distributed sensors in such a network can be exploited to enhance the efficiency and reliability of communication. In particular, information theory shows that optimal communication of information from correlated sources requires distributed joint source-channel (DJSC) coding.
This dissertation develops new approaches to designing DJSC codes based on low density parity check (LDPC) codes. The existence of low complexity code optimization algorithms and decoding algorithms make these codes ideal for joint optimization and decoding of multiple codes operating on correlated sources. The well known EXIT analysis-based LDPC code optimization method for channel coding in single-user point-to-point systems is extended to the optimization of two-user LDPC codes for DJSC coding in multi-access channels (MACs) with correlated users.
Considering an orthogonal MAC with two correlated binary sources, an asymptotically optimal DJSC code construction capable of achieving any rate-pair in the theoretically-achievable two-user rate-region is presented. A practical approach to realizing this scheme using irregular LDPC codes is then developed. Experimental results are presented which demonstrate that the proposed codes can approach theoretical bounds when the codeword length is increased. For short codeword length and high inter-source correlation, these DJSC codes are shown to significantly outperform separate source and channel codes.
Next, the DJSC code design for the transmission of a pair of correlated binary sources over a Gaussian MAC (GMAC) is investigated. The separate source and channel coding is known to be sub-optimal in this case. For the optimization of a pair of irregular LDPC codes, the EXIT analysis for message passing in a joint factor-graph decoder is analyzed, and an approach to modeling the probability density functions of messages associated with graph nodes which represent the inter-source dependence is proposed. Simulation results show that, for sufficiently large codeword lengths and high inter-source correlation, the proposed DJSC codes for GMAC can achieve rates higher than the theoretical upper bound for separate source and channel coding.
|
27 |
Adaptive Joint Source-Channel Coding of Real-Time Multimedia for Cognitive RadioKedia, Aditya 02 September 2014 (has links)
Radio spectrum has become a scarce and priced resource due to the rapid growth of wireless
networks. However, recent surveys conducted by the FCC indicate that a large part of
the allotted frequency spectrum lies unused. Cognitive radio systems, built on the software
defined radios, allow the efficient usage of these unused frequency spectrum. Cognitive
radio systems can be modeled as a multiple access channel in which certain users have the
priority (primary users) while others (cognitive or secondary users) are allowed to access
the channels without causing any interference to the primary users. However a secondary
user’s transmissions not only encounter high levels of uncertainty and variability in the
number of channels available to them, but they also suffer data losses if a primary user
activity occurs. Under such rigid constraints, the reliable transmission of real time multimedia
of a secondary user with an acceptable quality of service becomes challenging.
Multimedia transmission in a cognitive system requires channel adaptive source and
channel coding schemes. In order to address this problem, this thesis investigates and develops
a novel joint source-channel coding (JSCC) approach. The proposed JSCC allows
the dynamic generation of codes, which minimizes the end-to-end distortion. This JSCC
is based on quantized frame expansions to introduce redundancy into transmitted data. An
algorithm has been developed to determine the optimal trade-off between redundancy and
quantization rate, under a constraint on channel capacity. The proposed approach does
not require the communication of any overhead data between the transmitter and receiver.
When compared to codes commonly used to deal with packet losses, simulation results
indicate that the proposed JSCC can achieve lower distortion for secondary user’s transmissions
in cognitive radio systems.
|
28 |
On joint source-channel decoding and interference cancellation in CDMA-based large-scale wireless sensor networksIllangakoon, Chathura 26 May 2013 (has links)
Motivated by potential applications in wireless sensor networks, this thesis considers the problem of communicating a large number of correlated analog sources over a Gaussian multiple-access channel using non-orthogonal code-division multiple-access (CDMA). A joint source-channel decoder is presented which can exploit the inter-source correlation for interference reduction in the CDMA channel. This decoder uses a linear minimum mean square error (MMSE) multi-user detector (MUD) in tandem with a MMSE joint source decoder (JSD) for multiple sources to achieve a computational complexity that scales with the number of sources. The MUD and the JSD, then iteratively exchange extrinsic information to improve the interference cancellation. Experimental results show that, compared to a non-iterative decoder, the proposed iterative decoder is more robust against potential performance degradation due to correlated channel interference and offers better near far resistance.
|
29 |
Low Density Parity Check Code Designs For Distributed Joint Source-Channel Coding Over Multiple Access ChannelsShahid, Iqbal 23 August 2013 (has links)
The efficient and reliable communication of data from multiple sources to a single receiver plays an important role in emerging applications such as wireless sensor networks. The correlation among observations picked-up by spatially distributed sensors in such a network can be exploited to enhance the efficiency and reliability of communication. In particular, information theory shows that optimal communication of information from correlated sources requires distributed joint source-channel (DJSC) coding.
This dissertation develops new approaches to designing DJSC codes based on low density parity check (LDPC) codes. The existence of low complexity code optimization algorithms and decoding algorithms make these codes ideal for joint optimization and decoding of multiple codes operating on correlated sources. The well known EXIT analysis-based LDPC code optimization method for channel coding in single-user point-to-point systems is extended to the optimization of two-user LDPC codes for DJSC coding in multi-access channels (MACs) with correlated users.
Considering an orthogonal MAC with two correlated binary sources, an asymptotically optimal DJSC code construction capable of achieving any rate-pair in the theoretically-achievable two-user rate-region is presented. A practical approach to realizing this scheme using irregular LDPC codes is then developed. Experimental results are presented which demonstrate that the proposed codes can approach theoretical bounds when the codeword length is increased. For short codeword length and high inter-source correlation, these DJSC codes are shown to significantly outperform separate source and channel codes.
Next, the DJSC code design for the transmission of a pair of correlated binary sources over a Gaussian MAC (GMAC) is investigated. The separate source and channel coding is known to be sub-optimal in this case. For the optimization of a pair of irregular LDPC codes, the EXIT analysis for message passing in a joint factor-graph decoder is analyzed, and an approach to modeling the probability density functions of messages associated with graph nodes which represent the inter-source dependence is proposed. Simulation results show that, for sufficiently large codeword lengths and high inter-source correlation, the proposed DJSC codes for GMAC can achieve rates higher than the theoretical upper bound for separate source and channel coding.
|
30 |
Low-delay sensing and transmission in wireless sensor networksKarlsson, Johannes January 2008 (has links)
With the increasing popularity and relevance of ad-hoc wireless sensor networks, cooperative transmission is more relevant than ever. In this thesis, we consider methods for optimization of cooperative transmission schemes in wireless sensor networks. We are in particular interested in communication schemes that can be used in applications that are critical to low-delays, such as networked control, and propose suitable candidates of joint source-channel coding schemes. We show that, in many cases, there are significant gains if the parts of the system are jointly optimized for the current source and channel. We especially focus on two means of cooperative transmission, namely distributed source coding and relaying. In the distributed source coding case, we consider transmission of correlated continuous sources and propose an algorithm for designing simple and energy-efficient sensor nodes. In particular the cases of the binary symmetric channel as well as the additive white Gaussian noise channel are studied. The system works on a sample by sample basis yielding a very low encoding complexity, at an insignificant delay. Due to the source correlation, the resulting quantizers use the same indices for several separated intervals in order to reduce the quantization distortion. For the case of relaying, we study the transmission of a continuous Gaussian source and the transmission of an uniformly distributed discrete source. In both situations, we propose design algorithms to design low-delay source-channel and relay mappings. We show that there can be significant power savings if the optimized systems are used instead of more traditional systems. By studying the structure of the optimized source-channel and relay mappings, we provide useful insights on how the optimized systems work. Interestingly, the design algorithm generally produces relay mappings with a structure that resembles Wyner-Ziv compression.
|
Page generated in 0.0637 seconds