The subject of the diplom work was to prepare a detailed project documentation of the penzion with hippotherapy in Veseli nad Moravou. This is a document processing house with two floors and the building stables. The object of the pension are located accommodation rooms, dining room and especially apartment manager. The building is located 12 stables are housed boxes, feed stores and higienické facilities for guests.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Žďár nad Sázavou. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #6167/2. Both plat sis parts of cadastral area of Žďár nad Sázavou. There are all needed engineering netwoeks nearby. Object is divided on two functional parts, which are operationally and constructionally connected. First part is exhibition and representatice hall, which are capacity of 7 exhibited vehicles. Other partis formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Second part is service for personal and light commercial vehicles with four working stations. Construction is designed reinforced concrete columnar structural system. Plan dimension autosalon is 31,06x22,6m. Plan dimension autoservise is 30,74x18,84m. The cladding autosalon is designed of ceramic tile 250mm. The cladding autoservis is designed of sandwich panel. Roof of building accross the surface is flat roof. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hal lis more than 50% glazed. Parts of autosalon and autoservise are designed as sigle storey objects, while administrative part is designed as a two.

Subject of this diploma thesis is desing dokumentation of apartment house. Documentation contains all requisites according to valid regulations. House is designed as detached basement house with one underground floor and five aboveground floors. Object is based on reinforced concrete foundation pads. House is roofed with a flat roof. House contains 18 dwelling units with balconies or terraces. In object is solved parking in underground floor. Vertical load-bearing structure is made of clay blocks. Floors are made of cast-in-place reinforced concrete. Underground floor load-bearing structure is reinforced concrete frame. House is insulated with contact thermal insulation. Mechanical resistence and stability, health protection, healthy live conditions and enviroment, fire security, safety in use of building, energy savings and thermal protection is ensured.

The content of the master thesis is processing of design documentation for the newly-built detached building of guest house with wine cellar. The cappacity of guest's accommodation is 24 people. The house is placed on a sloping plot in the village of Žeravice (696 47). It is a two-floor building with partial basement. In the basement there are technical facilities, storage spaces and wine cellar. The structure is based on concrete strip foundations. Loadbearing masonry is from clay blocks. floor structure is from filigran panel, the roof is sadddle with a slope of 25°.

Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.

This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.

The main goal of the master’s thesis is to design a new building of the nursery in Brno-Soběšice. It is one-storey building. This floor is divided to two same parts. In each of them is day room, sleeping room, office, bathroom, cloakroom for children, cloakroom for teachers with shower and toilet and stock for beds. Also there is director office, toilet, hallway, utility room, room for cleaners, sink and stocks. The vertical loadbearing structures are designed from Porotherm ceramic blocks and the hollow concrete blocks. The building is insulated by a contact thermal insulation system ETICS. The horizontal loadbearing structures and the staircase are designed from reinforced monolithic concrete slab. The roof is flat with extensive greenery. The whole construction are based on foundation passports. The building site contains also an outdoor car park with ten parking spot and garden with climbing frames. The project was performed in Autocad and visualization was performed in ArchiCad and Lumion. All constructions comply with valid standards and regulations. Master’s thesis is divided to three parts. In the first part A it deals with the construction design of a building for a building permission. It contains architectural-building solutions, building physics, situation drawing, reports, building design solutions and fire safety solutions. In the second part B it deals with the design of technical equipment of buildings. It includes the design of sewerage system, water, gas, photovoltaic panels, lighting, ventilation and heating. In the third part C it deals possible systems for the use of rainwater. I described possible systems for the use of rainwater and developed a rough calculation for the selected system.

The subject of the thesis is the development of project documentation for the construction of a nursing home in Zlín for clients who are unable to take care of themselves and need full day care. The nursing home is designed to stand alone in sloping terrain. The slope is used and the entrance to the first above-ground level is at the level of the modified terrain from Broučkova street and the entrance to the basement is also from the modified terrain. The building is designed with one underground floor and five upper floors. The circumferential and internal supporting masonry is designed from ceramic cut cinder blocks on the upper floors. Lost shuttering is used on the perimeter and vertical support structures, in the basement. Elevator shafts, ceiling structures and staircases are designed from monolithic reinforced concrete structures. The roof is an extensive green roof. The object is based on reinforced concrete strips. The object is insulated with the ETICS.

The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.

The aim of this master’s project is to develop project documentation of a new-built mountain hotel in Ostružná. This hotel is near the ski area Ramzová in Jeseníky. Foundation of my building is from ground reinforced concrete slab. My building is supported by clay block load-bearing walls and clay non-load bearing walls. Exterior building envelope is designed as an aluminum shingle ventilated facade. The slabs are from reinforced concrete. The roofs of this designed building are two, first is pitched roof with insulation over rafters and second is intensive green warm flat roof. This project contains HVAC concept, photovoltaic panel concept, heating concept in technical equipment of building part. The third part of my master’s project is energy assessment for the building.