The master thesis designs a mixed-use building in Ledeč nad Sázavou. The thesis consists of three parts. First part presents the project documentation of architectural-construction. Second part proposes the technical equipment of the building. Third part is assessment of the designed building by methodology for multicriteria evaluation of buildings SBToolCZ. The building is located in undeveloped and slightly sloping land. The building has three above-ground floors. There are three different operations in the building, which are a café and an electrical shop and an office part. There is a café, an electrical shop, technical and storage facilities on the first floor. The second and third floor is an office part and company apartment. Structurally, the building is solved by a two-wax load bearing system. The building is founded on footing and foundation slab. Load bearing vertical elements are walls, columns and posts. Externall wall is designed from ceramics block with and mineral insulation. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building has a flat roof. In the building is air condition and cooling system and heating. Part of electricity demand is covered by photovoltaics on the roof. All drawings and visualization are designes in software ArchiCAD.

The subject of the diploma thesis is the processing of project documentation for the construction of wellness pension. This building is designed in a medium sloping terrain on the edge part of the Rajhrad city. The building has 3 floors and garage in the basement. Object is divided into 2 parts, the first part consists a restaurant and 2 floors for temporary accommodation in 14 rooms for 45 customers. The second part consists wellness for accommodated and also for other outside customers. The roof is designed single skin with vegetation area (extensive). The project includes a solution of paved areas and access to the underground garage, fencing, water connection, sewage connection, rainwater conection including a retention tank and overflow into the rainwater sewerage. The construction system of the building is based on reinforced concrete footings connected to foundation strips in the places of the cladding, follow up reinforced concrete columns. The ceiling structures, including hidden girders and stairs, are made of monolithic, reinforced concrete. Vertical load-bearing structures are designed from POROTHERM ceramic blocks. The vertical structures of the basement are designed from lost formwork. The building's ventilation system is divided into four parts, the first part is for wellness, the second part is for restaurant and pension, third part is for kitchen, last part is for fire protected escape route.

The aim of the diploma thesis is to prepare the construction called the District Police Department of the Czech Republic in Brno, Bohunice. The diploma thesis contains a technical report on the construction technology project, which deals with architectural and construction design solutions, coordination situation and transport routes, where critical points are assessed time and financial plan of construction, where all construction objects are described with their time and financial schedule, a study of the implementation of the main construction stages, which addresses the various stages of construction. The diploma thesis contains a technical report, item budget, plan for the establishment and liquidation of buildings and drawings of construction site equipment for each stage, design of the main construction machinery for the construction. A detailed time plan of the main building, a plan of its supply of materials for the rough construction was prepared for the given construction. Furthermore, the work contains a technological regulation for a reinforced concrete monolithic staircase, which is related to the control and test plan for a reinforced concrete monolithic staircase. The next assignment deals with the item budget of the main building for the rough construction, the drawing of the formwork for the reinforced concrete monolithic staircase and the economic assessment and evaluation of construction cranes.

The subject of the diploma thesis is the design of a free-standing veterinary clinic building in Nová Paka, in the form of project documentation for the construction. The building of the veterinary clinic consists of 3 rectangles forming a Z-shape, where the entrance to the building of the veterinary clinic, its operational and administrative part is located in the eastern part. In the western rectangle there is a separate and operationally separate entrance to the apartment unit, which is located on the second floor. The entrance to the veterinary clinic building and the housing unit is barrier-free. The building will be located in a slightly sloping terrain (3.49%). The main facade of the building with the entrance to the building is oriented to the southwest. The separate entrance to the apartment unit is from the northeast side. The perimeter masonry consists of the Porotherm system with the ETICS contact thermal insulation system in a thickness of 300 mm and 200 mm ETICS masonry. The internal load-bearing masonry also consists of a Porotoherm masonry system in a thickness of 250 mm. Internal non-load-bearing masonry consisting of the Porotherm system in thicknesses of 115 and 140 mm. The ceiling structure consists of a reinforced concrete slab th. 200 mm. Above the veterinary clinic, the roof area forming the terrace of the housing unit is considered, divided into two parts 1) with a vegetation layer and 2) with a tread layer of concrete paving on the targets. The main waterproofing layer of the flat roof consists of strips of SBS modified asphalt. Above the 2nd floor, a sloping hip roof made of glued wooden trusses is considered, and a sheet metal roofing is considered as the roof covering of the truss roof. The windows are designed with insulating triple glazing. The attic on the flat roof is equipped with an aluminum railing with a vertical bar infill. The building is heated by a gas condensing boiler, the building is also designed forced ventilation

The subject of this master thesis is the elaboration of project documentation for the construction of a car showroom & service. This building is located in Brno, cadastral area of city Brno: Královo Pole. It is a detached building without a basement built on a trapezoid shaped area with a flat terrain. Object is divided into two functional parts: the car showroom and the car service. These two parts are constructionally and operationally connected. The car showroom is designed as a two-storey object, which serves as car exhibition, technical and hygienic facilities and mainly the administrative parts of both objects. The car service is designed as a single-storey object without a basement, which serves as a workspace of the car service and a warehouse. The load-bearing structural system of the car showroom is made of reinforced concrete pillars with ceramic masonry. The load-bearing structural system of the car service is made of reinforced concrete pillars with light sandwich panels. The foundation slab consists of prefabricated stepped foundation pad, prefabricated reinforced concrete grade beam and concrete strip footing. Insulation system of the building is made of insulation boards from basalt wool cladding by ventilated facades with perforated steel panels. Insolation in the car showroom is secured by glass curtain wall in combination with plastic windows and doors. Ceiling structures are designed as prestressed ceiling panels Spiroll. Roofing structure of both objects is supported by prestressed reinforced concrete roof girder in combination with trapezoidal sheet and insulation boards from basalt wool and PIR boards. The roof of the objects is flat with ordinary layer order with waterproof layer from softened PVC.

The content of this thesis is elaboration of technical documentation for realization of a sports centre. The building is situated in Hodonín in flattened terrain. It is a building with two floors, non-cellar, flat vegetation roof and sloping roof of the wooden glued laminated trusses. The building is based on plain concrete strip foundations and concrete foundations footing. Both peripheral and internal walls are made of ceramic blocks Porotherm. In open spaces, reinforced concrete columns are designed. The ceiling structure is designed from pre-stressed Spiroll ceiling panels. The peripheral walls are insulated with the ETICS external thermal insulation system in the western part of the building. On the rest of the building there is a ventilated facade with a cladding made of wood and Cetris tiles. The building is functionally divided into two parts with a common entrance. On the north and south side there are sports grounds. The rest consists of a restaurant, a kitchen with facilities, a hygienic background for employees and visitors. The whole building is barrier-free.

Diploma thesis describes the design and processing of project documentation of the multifunctional building. The multifunctional building is located in the central part of the town Náměšť nad Oslavou. The building has 4 floors. It is partly cellared building with flat roof and walkable terraces. This building is consisted of 2 functional parts, the first part is designed for living and the second one is designed for contact with the customer. There are shops and offices. The first floor is wheelchair accessible. In the basement there is a technical background of the building and cellars for housing units. In this multifunctional building we can find 13 residential units and five offices. All of the floors are connected with staircase and lift. The Carpark and the private garden with playground are also part of this residential area. This building is based on concrete blocks. Load-bearing, peripheral walls and connecting walls are made of ceramic blocks. A monolitic ceiling construction is the combination of the iron and the concrete. Two types of insulation are used in peripheral walls. The first one is called ETICS, external thermal insulation composite system, made of polystyrene. The second type of insulation is facade cladding system where the main insulation layer is made of mineral wool. The insulation layer is replaced by XPS polystyrene where facade is in contact with the ground. Facade cladding panels are made of cement and wood fibers called Cembrit.

The master´s thesis elaborates the project documentation for the construction of the District Police of the Czech Republic in Brno. The new building is situated in the north of city part Bohunice. It´s a three- floor object with partial basement and flat roof. The bearing perimeter masonry, internal bearing masonry and internal non- load bearing masonry are made with technology from ceramic hollow blocks. Ceiling construction is designed from prestressed ceiling panels. The perimeter walls of the of the underground floor are made from blocks of lost formwork, which is insulated with extruded polystyrene. The walls on the above- ground floors are insulated by a combination of contact thermal insulation system and ventilated facades with fiber- cement facade cladding boards.

The subject of this thesis was to develop project documentation for building construction. It is a new four-storey house with restaurant, situated on the outskirts of the village Bridges at Jablunkova. The building is brick, has a two-level gable and shed roof, consisting of wood roof system. Slope of the parcel on which the house is located, allows the building of the plant into the ground. Because of this it is possible to enter it, either the main entrance to the first floor or building around and over the summer terrace come directly to the restaurant on the second floor. Above it are two more floors for hotel guests only, a total of 10 accommodation units with its own bathroom.

The objective of this thesis is to draw up the design documentation for the construction of a hotel. The hotel is situated on the edge of the golf resort Kaskáda near to Jinačovice. It’s a brick building with two above – ground floors and one underground. There is the staircase in the building that creates protected escape route. The perimeter wall is designed of ceramic bricks Porotherm T Profi. They are filled – in by mineral wool. The hotel is divided into three dilatational parts. There are 35 guest rooms in the hotel; two of them are barrier – free, in total 63 beds. In the ground floor there are entrance, reception, restaurant, bar, kitchen with the background. In the basement there are technical equipment, a fitness room, a wellness, changing rooms, washrooms and a bar. The roof of the hotel is flat. There is the terrace accessible from the apartments in the second floor above the restaurant.