The Master's thesis dealt with the project new construction hotel in the village of Kvilda, district Prachtice. Mountain object is used for accommodation and meal serving of guests and its accommodation capacity is 50 reviews. The building is partly basement with three floors. The support system is made up in the basement of formwork blocks and in the overhead floors ceramic blocks, which are supplemented by insulation system Porotherm with Styrofoam. Object is an irregular floor plan and is covered with a single layer flat roof. In addition to fire safety, the work addresses the project documentation as well as an assessment of the proposal of concrete constructions and solves the heat heating object too.

This thesis solves the project of materniti house in moderate terrain. Materniti house is located on the grounds numbers 1475 in the village Jezeřany - Maršovice. The building has two floors. Materniti house is designed for 60 children and 15 employees. Building serves as a pre-school institution for the education of children. The buiding has a load-bearing wall system. The outer walls, load–bearing walls and partitions are from ceramic blocks POROTHERM. Wall is insulated with mineral wool BAUMIT thickness of 100 mm. The ceilings are made of prestressed hollow panels Spiroll HCE 250 thickness of 250 mm. The roof of building is part of the aisle, made of wooden trusses with an inclination of 12°. Truss consists of hunter cased sloping roof. The second part of building consists of single-layer flat roof. The facade is part of non-ventilated and ventilated by fiber-cement boards CEMBRIT. Windows are plastic DESIGN by VEKRA. Balcony two-doors are plastic VEKRA CLASITIC VD. Entrance two-doors are wooden VEKRA NATURA 68.

This Master´s Thesis deals with design and execution of project documentation for building of sport and wellness center. The site is situated in the outskirts of Vsetín in Zlín region. The structural system of the building is walled with porotherm blocks. Ceilings are made up of ceiling panels spiroll. Roof is mainly flat, pitched roof is only designed above squash courts. The buildings’ shape is composed of three blocks which together form a functional complex. The sport center offers these kinds of activities: spinning bike rides, exercising, weight lifting, group training and squash. The recreation centre offers massages electro and lymfo massages, pedicure, manicure, sauna, rehabilitation and solarium. Part of the center is also cafe providing also snacks, sport counseling, nutrition counseling and office.

This master‘s thesis deals with the design documentation Fit4You sports center. The new building is located in the district of the City of Brno in the cadastral Brno – Líšeň. The building is designed as a reinforced concrete skeleton system with ceramic masonry infill with two floors. Part of the building with the sports hall is roofed with arched trusses made of laminated wood. The second part of the building with facilities for the hall is roofed with a flat floor.

This thesis deals with the detailed documentation of the sports center . Estimated location of this building is on the property number 136/15 in Karlovy Vary in the cadastral Tuhnice in the Karlovy Vary region. Currently, land without regular use. The land is owned by the investor. Newly built three storey sports center will serve the large kinds of sports activities. The sports center will offer the first floor , two multipurpose rooms , for example, aerobic , spinning , heat, zumba and other sports, the climbing wall and two squash courts and in the second floor of the gym and two multi-purpose halls . The first floor will also find a restaurant with two bowling lanes . The project was based on the layout of the study and the project planning permission . The result of this work is to complete detailed documentation, which includes a drawing of the situation , floor plans , sections, elevations , drawings, foundations , ceilings , roofs, stairs and details. Furthermore, a technical report , extracts elements of fire safety of the building and thermal assessments of buildings.

Master´s thesis deals with the project documentation of the design of the new building hall of production. This hall is situated in Slapy at Tábor. Design and appendix´s were made by the present valid laws, goverment´s restrictions and standards. This object is placed in ground plot number 104/12, the land cadastre of Slapy at Tábor. The building object is designated for factory and storage area. Next to the building plot carry underground services. In the building object is factory hall and cloakroom for 2-4 employes. Director´s flat is in first floor. Building has two floors and floor plan 12,5 x 30,5 m on final grade. The carrying systém is from hollow building brick. The building has gable roof. Specialization is processed on „heating the building“ witch forms separate annex of Master´s thesis.

The objective of this thesis is to create the documentation for building construction. Designed building is a mountain guesthouse. Building plat is located in the cadastral Poteč. Project documentation has been prepared in accordance with applicable laws, regulations and standards. The object is designed as one floor building with basement and residential loft and is fitted in sloping terrain. The building is shaped in layout L with the longest plane dimensions 40,11 x 39,05 m. Foundations are designed as strips of plain concrete. The building is designed as a wall support system. Wall system is combined of shuttering blocks filled with concrete, ceramic brick blocks and wood timbering. Roofed building is realized through the roof with a vertical stool. The ceiling above the ground floor is designed as a reinforced concrete slab ceiling and above the first floor as the timber.

This diploma thesis focuses on the design of new multifunctional building in Frydek-Mistek. Project and attachments are processed according to the current laws, regulations and standards. Multifunctional House is located on parcels 3364/190 and 3503/1, in the cadastral Místek. The house has four floors and reside in 3 commercial units and in the last two floors 5 residential units. The other two dimensions of the house are 21,15x13,15m. Roofing the house is solved by a flat roof. The building is brick ceramic blocks Porotherm. Ceilings are made up of reinforced concrete panels. The construction is based on flat base structures that form the plain concrete C20 / 25 and the supporting concrete slab thickness of 150 mm is reinforced curry networks 100/100/6.

This thesis deals with the design of brewery in Litomyšl. Brewery with beer production 2000hl per year and restaurant for 140 guests and kitchen have the main function of the building. The building is designed as one construction object and its built-up area is 472,2 square meters. The building has a partial basement, two floors and it has structural masonry system. A load-bearing walls of two floors are formed by clay masonry and the load-bearing walls of the basement are formed by permanent formwork. A roof of the building is a flat roof with a slope of 3 percent and the finish is made of modifed bitumen membrane.

The objective of this diploma thesis are new design materials in a view of their structure, properties, manufacture,partitions, applications and possibili-ties of effective machining them Ceramics are used in the field of design applications more often than before. They are in form of compact parts and in form of thin coatings on the surface of metal parts. Fast development of constructive applications requires the same progress rate of machining ma-chines innovations and development of new methods of effective machining these materials, too. The aim is to produce parts of demanded shapes, dimensions and surface quality at affordable costs. Ceramics guarantee long terming durability and reliability. The evaluation of ceramics grinding tests from the point of view of cutting forces and surface quality of the machined faces are presented in the last part of the diploma thesis.