Project of health center with facilities for civic amenities. It is a three-storey above ground object. On the ground floor there is a pharmacy, a veterinary station and a medical office. On the second floor there are six medical offices and a technical room. On the third floor there are 4 spaces for civic amenities. Vertical load-bearing structure consists of masonry of ceramic blocks and internal monolithic reinforced concrete skeleton. Horizontal load-bearing structure is made of reinforced concrete beams and prestressed reinforced concrete panels. The building is based on concrete foundation strips and reinforced concrete pads. The building is roofed with a warm flat green roof. Thermal insulation of the facade is made of mineral wool insulation and has a ventilated facade.

The objective of the thesis is newly built winery in the wine cellars alley situated inVlkoš u Kyjova in the South Moravia Region. Capacity for wine production is around 180,000 litres. In the building are the tasting rooms and pension with the capacity of 30 people. The building has three floors and a partial basement. The winery is located on sloping land. The building is designed as a brick construction, where underground vertical structures are made of blocks permanent formwork Best and part above ground is made of ceramics blocks Porotherm. The horizontal structures are made of prestressed ceiling panels Spiroll above the production area and the rest is made of ceramics system Porotherm. The gable roof, the walkable and warm flat roof are used in the project. The main goal of diploma thesis is to draft a develop project documentation for building construction.

The Subject of this diploma thesis is design documentation of Relax sports facility with accommodation in Suchdol and Odrou. Mixed-use building is three-storeyed with partial basement. Roofing is flat single-skinned roof over the entire building. From the material point of view, the basement is made from lost formwork, all aboveground floors are bricked from ceramic blocks. The facade is designed as ventilated. Ceilings will be made from cast-in-place reinforced slabs and the sports ground will be covered with glued lamellar beams. The basement part of the building is relaxing - there are various types of saunas, cooler, whirlpool and massage room. On the first floor there is a restaurant with backgrounds and kitchen, a café, and sports activities in the form of badminton, squash and gym. Two more floors are used mainly to accommodate guests in the hotel. All operations are functionally connected by the reception hall.

This diploma thesis deals with the design and elaboration of the project documentation for the works required for the completion and modernization of Žamberk Health Clinic. Specifically it deals with the extension of ambulatory psychiatry of its inpatient ward. The object in focus is located in the built-up part of Žamberk and it is located in the area of the Specialist Asylum Albertinum Žamberk. The building is designed as an annex with one underground and two aboveground floors with a flat roof. It is divided into three units: a dormitory psychiatric care, the dormitory gerontopsychiatric care unit and the therapeutic block. The suggestion was to keep up the requirement to minimize the interference of existing outpatient psychiatric facility and to create operationally interconnected unit between the existing object and the extension at the same time. The construction system is considered from traditional building materials. The fundamentals are made by a combination of plain concrete and lost formwork. Vertical carrier structures are made of reinforced concrete monolithic walls for the underground floor and brick walls made of ceramic blocks for both aboveground floors. Vertical partitioning structures are also walled from ceramic blocks. Horizontal carrier structures are designed as reinforced concrete monolithic continuous boards. The object is insulated with ETICS, the roof is flat and single-skinned

The aim of the diploma thesis was to draw up a proposal for the project documentation for the realization of the construction of the civic amenities building and that of the sports center. The building is located in Prostějov, cadastral area Prostějov. It is a three-storey building with one underground and two above-ground floors. Across the floors there are spaces for various sports uses, technical background of the building, staff backgrounds and a café. The object is based on the base passages, the vertical structures are formed by blocks of lost formwork and ceramic cavity blocks, the ceiling structures are solved by pre-stressed ceiling panels. The roof is designed as a single-layer, flat with extensive vegetation treatment, the roofing of the roof is finished by means of atics. The project is designed with an emphasis on the layout and constructional design of the building with respect to the parties and the land plan. During the processing I tried to use modern building materials and procedures and to process the building as a functioning unit.

The thesis is focused on elaboration of project documentation. The student house will be located in the city of Ostrava. The building has 4 above-ground floors with partial basement .The basement will for the most part serve as a technical facilities. On the first floor there will be rooms - reception, reception, office, bicycle room, café, small shop, gym, copy center, facilities and hygienic room. Residential units are located on 2 to 4 floors. There will be 26 residential units - single and double, total for 54 persons. Each residential cell has its own sanitary facilities and a kitchenette. The building is designed as a masonry system. The load-bearing masonry in the basement is from a lost formwork of 300 mm. external wall and internal supporting masonry of above-ground floors of clay masonry, Therm type, 300 mm. The warm flat roof is extensive, with a fall of 3%.

The diploma thesis deals with the design of a multifunctional house on the street Křídlovická in the city of Brno. The new building is five-storey with four above-ground and one underground floors. The main entrance is oriented to the southeastern side and adjacent to the northwest side, and a separate entrance to the underground garage in the southwest corner of the designed object. Behind the main entrance is a staircase connecting all floors, after a special entrance for the underground garage is the staircase down into the garage. From the southwest side there are entrances to restaurants and shops, these have staffing and supply entrances and social facilities from the north-east side of the building. A downhill ramp is also located behind the northeast side of the building, from the southwest side are solved areas - restaurant garden, sidewalks and parking areas. In other above-ground floors, open space office spaces with separate meeting rooms, office director, secretary offices, and social facilities on the northeastern side of the floor are designed. Within these floors is proposed continuous greening of the atrium. The supporting system is a monolithic reinforced concrete combined with masonry staircases and a northeast wall. In the basement, the support system is a skeleton in combination with the walls of a lost formwork. Roof flat single-skinned with various inclinations 1-5°

The master thesis is dealing with characterization of the structure and properties of the YSZ thermal barrier coating deposited by water hybrid plasma spray technology on the CoNiCrAlY bond coats modified by using electron beam and vacuum annealing. Deposition of the bond coats was performed via high velocity oxy-fuel technology and cold spray. In case of experimental evaluation, the microstructure and chemical composition of the ceramic top coat deposited with powder and suspension feedstock was analyzed. The same analysis procedure was used also for bond coats after electron beam remelting by using two sets of parameters. Furthermore, the changes in microstructure and chemical composition of the remelted and annealed bond coats was evaluated. Eventually, the micromechanical properties of the top coats and the bond coats were measured. The ceramic top coats deposited with powder feedstock exhibited the structure composed by splats, while the top coats deposited in form of suspension showed fine structure with columnar grains. The dendritic structure was observed on remelted bond coats. The annealing process had an influence on the structure in form of coarsened phases and the chemical composition was changed due to diffusion of the elements.

The main target of the thesis is design of a new building of the rehabilitation center in Havlíčkův Brod. The rehabilitation center consists of three part. The main (middle) part has two above-ground floors and a basement with flat roof and the other two parts have only ground floor with green flat roof. The main middle part contains reception, café, laundry room storage, utility room, manager‘s office and outpatients doctor‘s office. In the left part there are hydrotherapy, ergotherapy, magnetotherapy and electrotherapy. In the right part there are fitness center and physiotherapy rooms. Vertical load-bearing structures are Made of Porotherm ceramic blocks (above-ground floors) and the Hollow concrete blocks filled with C20/25 and reinforcement B500B (basement). Horizontal load-bearing structures are made of the prestressed Spiroll ceiling panels. The building site contains also outdoor car park and garden with pond. The project and visualization were carried out in the ArchiCad and Lumion programme. All structures comply with the valid standards and regulations.

The aim of this diploma thesis is to elaborate the project documentation of a new-built home for the elderly, in the cadastre unit of small town Blížkovice. It is a three-storey building with a basement. On the basement there are cellar berths, garage and technical facilities. On the first floor there is facilities, dining rom, a doctor´s surgery, massage, hairdresser´s and pedicure. On the second and third floor there are common areas and a total of twenty-two residentail units (1+kk – eighteen flats, 2+kk – two flats). The vertical loadbearing structures are made of clay blocks and lost formations. The object is insulated by a contact thermal insulation systém. The horizontal loadbearing structures and staircase are made of reinforced monolithic concrete slab. The roof consists of a flat roof with extensive green and terrace. There are ten parking spaces on the ground.