For the supersonic flow mode, which occurs in the internal flow behind the aperture separating two spaces with a large pressure drop, the critical flow is a characteristic phenomenon. In the case of critical flow behind the aperture, a supersonic flow area with reduced pressure ending with a shock wave with a step change in state variables is created. When diagnosing velocities, which are obtained from the values of static and total pressure, due to the changes caused by the shock wave passage, correction of the diagnostic quantities obtained by measuring by means of mathematical relations taking into account the physical phenomena is necessary.

For set parameters of a steam and a boiler feed water is designed a thermal and dimensional plan of the boiler, allowing high efficient requests. A boiler is used for combustion of blast furnace gas contains 10% of a natural gas used as a stabilisation element.

This thesis is based on the series of scholarly article dedicated to the issue ofpumping in the differential scanning chamber of an environmental scanning microscope. The thesis is based on Danilatos’s study where the pumping of the differential pumped chamber is solved by means of the Monte Carlo statistical method. The thesis performs analysis of gas flow at low pressures through orifice separating the spaces with a large pressure drop Dr. Danilate. The analyses will be used for the design of the experimental chamber which will serve for the experimental evaluation of the flow results in the chamber using the continuum mechanics.

The purpose of the thesis is to design transmitting antenna based on septum polarizer solution for indoor measurement range. The antenna is considered for both senses of circular polarization. The design is divided into three main sections. First section is devoted to analysis and selection of a suitable waveguide. Ridge waveguide as a crucial part of a septum polarizer is mentioned in this section. Second part is the most critical; here the septum polarizer is analyzed and based on simple procedure also designed. Two suitable horn apertures are then developed as a part of the third section. Individual transmitting antenna parts are assembled together into one model and simulated with excellent results for axial ratio, cross-polarization discrimination, return loss and isolation between ports.

The aim of this diploma thesis is the construction design of the steam boiler burning biomass according to the set parametres (450°C, 5,2MPa, 5,83kg/s).There are main parts to solve and design: stoichiometry, energy balance, combustion chamber, heat-delivery surface and strenght calculation output chest of superheater.

The Diploma Thesis deals with the explanation and the effective solution of the initial problems during a production line implementation of different type in the existing process. In order to make the production economical effective and correspondent with decided standards and customer requirements, the thesis is based on the identification and elimination of abnormal phenomenon by new production line implementation for bimetallic barrels.

This diploma thesis deals constructional and calculation design of the steam boiler 60t/h of clean burning wood. For the parameters of the stoichiometric calculations are carried out and enthalpy calculations of combustion and air. The collected data is then made It a diagram of air and flue gas. The following are the calculations with the heat balance calculations of losses and determination of the boiler thermal efficiency of the boiler. It is made of the combustion chamber design and its thermal calculation. After determining the main dimensions of the combustion chamber moves continue the calculation of boiler heating surfaces. At the end of the calculations are controlling the overall energy balance. Boiler output parameters as temperature, pressure and quantity of the steam.

Steam boiler for wood burning 50t/h In this diploma thesis I will deal design of the steam grate boiler 50t/h of burning clean wood. For the specified parameters make a stoichiometric calculations and calculate the enthalpy of the air and combustion. I shall calculate the heat balance, losses of boiler and thermal efficiency of the boiler. The following section make a design of the combustion chamber and its thermal calculation. After determining the dimensions of the combustion chamber further continue by calculating boiler moves and heating surfaces. Finally check the overall heat balance.

The subject of this diploma thesis is engineering design of the continuous mixer with output range 3-5 TPH. Mixer is instrumental to mixing sand mixture intended to non-permanent sand forms in foundry. Proposed construction has to fulfill the specified functional requirements and parameters. Parts of solution are also necessary analytical and FEA calculations.

The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.