This master‘s thesis deals with design of vertical heat recovery steam generators (HRSG). In the introduction part is performed description and distribution HRSG, thermal calculation, proposal of a heat transfer surfaces and choice of materials. Finally is executed aerodynamic calculation, hydraulic calculation and then are suggested dimensions of the drums. Thesis also includes technical documentation of the boiler.

The aim of this diploma thesis is to theoretically, practically and experimentally explore different ways of waste heat utilization in the building industry. The work is divided into three basic passages. In the first part I analyze the theoretical nature of the various physical processes in recovery and is there a practical use. More emphasis is placed on heat recovery from wastewater, as I am using this way of recuperation in other parts of this diploma thesis. In the second point, I apply the use of heat from waste water when designing a technical solu-tion for the reconstruction of the heating system of the clinic. The design is solved in two variants. The first suggested location lokali- them, recuperative, shower exchanger operation rehabilitation, bath and massage. In the second variant, central recovery is envisaged using a heat exchanger in the accumulator well and water-water heat pump. Based on the technical and economic evaluation, the first option was selected. The second variant is ineffective and remains only in the case study. In the last section, I experimentally investigate the thermal efficiency and the relative savings of the heat exchanger, which is designed in the first variant of the second part. Measurement, processing of results and evaluation I made for laboratory conditions and for real conditions with the showering person. Finally, I appreciate the eco-nomic benefits of this facility.

The topic of the diploma thesis is the operational efficiency of heat sources . The thesis is divided into three parts. In the first part a theoretical solution of the heat sources efficiency can be found. In the second part there is a calculation solution of the project. The project solves the heating of a football stadium. Two variants of the heating source and warm water preparation are suggested and the variants are consequently compared and evaluated. The last part is experimental - the topic of the experiment is the efficiency of heat sources.

This Diploma Thesis is focused on initial and operating costs. At first we calculated price for all building and for its other parts, which was calculated by program used for budgeting. After that we calculated partial costs which were done only for specific parts of the construction. These parts were changed and due to these changes we were finding out differences in heat losses and initial costs. Than for individual rooms we were defining heat losses. In this rooms, radiators were designed to cover its heat losses. By summarization of all heat gains we find out boiler´s power and this boiler was used in our building. After that we calculated initial costs for heating system includes radiators and boiler. In the end we compared both kinds of heating systems due to one year operating costs. Results were used for defining final heating system which is the most economic efficiential.

This work is devoted to the design of a microclimate facility in a family house. The first part contains analysis of thermal losses before and after using thermal insulation. Based on this analysis, a heating system is proposed, including the necessary technical calculations for the operation of the system. As a heat source, a condensing boiler is selected. At the next point, the thesis focuses on the calculation of the heat gains in selected rooms in order to design a cooling device. A multisplit system is selected for cooling the rooms. In the next part the thesis deals with the design of forced ventilation of selected rooms. The ventilation system provides the necessary air exchange and covers heat losses through ventilation. At the end of the thesis is outlined the concept of regulation of individual systems and also the requirements for individual professions are described.

The aim of the diploma thesis is to evaluate the energy assessment and elaboration of energy performance certificates of the building. The building is an apartment building in Vítkov. The theoretical part deals with centralized heat supply. The calculation part contains a more detailed description of individual relationships and calculation procedures that are used to process energy performance certificates of the building. Furthermore, proposals for measures to improve the energy performance of buildings. In this part there is also a proposal of individual equipment of the new boiler room and thermographic measurement. In the project part there is an energy assessment assessing the building in two variants with individual heat sources. The evaluation is carried out from an energy, economic and environmental aspect.

Nowadays, European power production has to meet requirements than ever before. Environmentally oriented efforts end of coal mining and burning of coal, on which economies of a great number of countries depend. The main objective of these efforts is primarily the production of green energy from renewable energy sources and reduction of dependence on fossil fuels. However, the disadvantage of renewable sources (photovoltaics, wind farms) is their dependence on the weather conditions. As a result, there might be delays in supply of electricity, which must be compensated. One of the solutions is the launch of a combi cycle plant, which has the possibility of almost prompt start-up and electricity production. The combustion of gas and liquid fuels also ensures almost emission-free operation. In addition, thanks to the use of waste heat energy from the gas turbine, it is possible to operate the combi cycle unit with the character of a power plant and as a heating plant. The aim of this thesis is to search for combi cycles and balance calculation of the combi cycle heating plant under given conditions. In the last point, the approximate dimensions of the calculated heating plant are given.

This master thesis aims to design the heating system and HDW preparation in an apartment building. The first variant deals with condensation gas boiler as the only energy source, while the second variant combines the gas boilers with the solar thermal system. The apartment building is located in Prag and has three above-ground floors and a basement. In the basement is the technical room. Convectors are being used for heat distribution. The theoretical part deals with the introduction to the solar thermal system.

The import of the vegetable has prevailed in the long run over the own production. In connection with this reality and increasing demand for the food with higher quality the production greenhouse is more often built. The providing heat, cold and electricity for the year-round operation is related to the construction and working of these objects. The theoretical part of this theses describes possible ways how to cover energy consumption for the model greenhouse in Kožichovice, Třebíč region. The heat losses and the year-round heat consumption were stated for the selected model and compared with the exact values from Kožichovice. The following method of energy supply was selected based on the calculated energy consumption - the separate cogeneration unit, cooperation of several cogeneration units, a biogas station, a heat pump and central heating system. These methods of energy supply were subjected to technical and economical comparison.

This master´s thesis addresses heating of the new three - storey office building, which is located in Brno Pisárky. The heating system is designed as a low-temperature system with forced circulation of water using mostly panel radiators. As the heat source was designed two variants. The first heat source is the heat pump air - water, which is installationed inside. The second heat source is a gas condensing boiler. The part of design is preparation hot water. Ventilation of the building is equal-forced. Experimental part of master´s thesis is focused on measuring the amount of electricity produced per year by photovoltaic panels on the existing house in Brno Pisárky. Thesis also includes measuring outdoor temperature and intensity of solar radiation. The result is a comparison of the need for electricity for the heat pump for heating family house, total electricity consumption family house and amount of electricity produced by photovoltaic panels.