This master thesis deals with the feasibility studies desulphurization of powder granulation K3 boiler at Olomouc heating station. K3 boiler burns black energetic coal and after January 1st, 2016 will not meet new more strict emission limits. The theoretical part of the thesis charts usable desulphurization methods from which the semi-dry NID appears as the most appropriate one. In the practical part there is performed a stoichiometric calculation of the flue gas and the balance of raw materials and output products. The possibility of NID method usage is confirmed here. Next the annual operating cost of the desulfurization process is calculated and some NID systems already installed references are presented.

This master´s thesis deals with the constructional and calculation design of the boiler for burning wood and sub-bituminous coal. The work is divided into several parts. First, stoichiometrics calculation and enthalpy calculations of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, the dimensions and individual heating surfaces are proposed. At the end of the calculations are controlling the overall energy balance.

This master`s thesis describes the design alterations that lead to a reduction in heat loss of the house, an extension of living space in the attic and the subsequent reconstruction of the heating system. The first is presentation of the house. After that, there is calculation heat loss of the house. The next step contains design of a reconstruction for every room and calculation modified heat loss. Another point this work is design the reconstruction of the heating system, extension heating system to the attic floor, calculation pressure losses and selection condensing gas boiler. After that is designed regulation with central control unit and electric thermostatic radiator valve. The last part of master`s thesis is focused on benefit assessment changes, budget and return of investment. The drawings are listed in the appendix.

The aim of this Diploma thesis is design of steam boiler with steam reheating, for combustion the blast furnace gas. The fuel composition and primary parameters for calculation of the boiler were provided. In the first part the fuel composition is described. The main part of the thesis consists of stoichiometric calculations, establishing efficiency of the boiler, calculating combustion chamber as well as design and calculation individual heating surfaces. Part of the work is also drawing documentation of boiler.

The aim of the work is to design a brown coal combustion boiler of 235 t/h output. The work is divided into several parts. First, stechiometric calculations and calculations enthalpy of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, individual heating surfaces are proposed and at the end of the calculations are controlling the overall energy balance of the boiler. For calculation was design documentation added.

This master‘s thesis deals with denitrification of brown coal-fired boiler of electric power plant. First chapters describe technical characteristics of the boiler and possible measurements which would lead to lowering NOx emissions. In order for boiler to meet emission standards valid from 1.1.2016 flue gas treatment by selective catalytic reduction is proposed. Main part of the thesis is thermal calculation of the boiler with modifications necessary in order to apply SCR. The aim of calculation is to determine flue gas exit temperature and temperature at catalyst area in order to assess the suitability of proposed modifications.

The purpose of this Diploma Thesis is the construction design of the steam boiler with natural circulation for the combustion of wood biomass according to the specified parameters. It is the boiler with the power of 12 tons per hour of superheated vapor output parameters of 3,3 Mpa at a temperature of 400 °C and a temperature of feed water 105 °C. For the specified parameters I first calculated the stoichiometric calculations, boiler efficiency, and followed by using geometrical parameters of the blocks and thermal calculations set design and the number of heat transfer surfaces, depending on the input parameters of the air and water and output parameters of vapor. The work also includes drawings of the boiler.

The aim of this thesis is design a hotwater boiler for burning natural gas with an output of 60 MW. Boiler works with temperature difference 150 °C / 70 °C. For a given fuel is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of hot water and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.

This master‘s thesis deals with the design of horizontal heat recovery steam generators (HRSG) with two pressure levels after a combustion turbine. In the introduction part is performed thermal calculation and proposal of a heat transfer surfaces. Furthermore, are suggested dimensions of the drums and pipes for flooding and transferring. The emphasis is placed on the fulfillment the required parameters of steam and flue gas at HRSG outlet. At the end is calculated loss of boiler draft and made technical documentation a drawing of the boiler.

The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.