This theses work is concerned with assessment of transfer line exchanger behind pusher furnace. First part is describing technical characteristic and parametres. The most important part of this theses is thermic calculation of the boiler. Last following part is concerned with suggestions of constructional modifications of heating surface for proper functioning of boiler. These modifications are demonstrated by scheme in the enclosure.

The aim of this diploma thesis is to find a solution of heating system, a hot water preparation and a subsequent design of the heat source for the apartment building. The project consists of a calculation of heat losses, a design of radiators, a dimensioning of pipes and a design of two options of the heat source for heating and hot water preparation. The first option of the heat source I chose a pellet boiler and the second option is an electric boiler with solar collectors for the preparation of hot water. The introductory part deals with analysis of this object and emission limits of heat source using different fuels.

The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.

The subject of the diploma thesis is accumulation tanks in heating systems. The first part introduces the topic of thermal energy storage and types of accumulation tanks. The second part describes two specific options of heating the building of the boarding house and the restaurant with the use of storage tanks in the heating system. A gas condensing boiler is designed as a heat source in one variant and a pellet boiler in the other variant. The third part deals with experimental measurements, in which the accumulation tank with the installation for better stratification of hot water and the accumulation tank without the installation are compared.

This diploma thesis is devoted to the issues of the formation of fine particles in dependents on the combustion parameters. The first part of thesis is review, which summarized the information about combustion process and about formation of the gaseous products and fine particles inside them which created during combustion process. The main content of thesis is realization of measurements of fine particles from combustion, in several types of the tested combustion devices. Next part is a description of used measurement devices, which used for measurement. Last chapters are focused on evaluation of results from the measurements, comparison of the measurements between themselves and the finding the existence of the dependence of the formation of fine particles on operational parameters of boiler. And all results are evaluated in the conclusion.

The object of the thesis is to design a grate boiler for bagasse and brown coal combustion with a heat output of 160 MW. Calculations of a flue gas stoichiometry are based on known element analyses of each fuel. The crucial part of the thesis includes designs of heat-exchanging surfaces, where the bagasse is considered as the main fuel while the brown coal is the spare one. Overall thermal balance and an actual boiler efficiencies are provided in last chapters. The boiler-outlet flue gas temperature is compared with the dew point temperature at the very end of the thesis. As a part of the thesis there is a design of the boiler attached.

This thesis deals with a project of steam boiler to combustion of refused-derived fuel. Considering the required fuel and output parameters of the steam was made the thermal calculation of boiler with it design and an individual calculation of heat exchange surfaces; hydrodynamic and aerodynamic calculations of the steam boiler.

This Master´s thesis deals with the verification calculation of boiler which burns brown coal for the application of the selective catalytic reduction method. The thesis is divided into several parts. In the first of all is performed the calculation of the furnace chamber which involves stoichiometrics calculations and enthalpy calculations of air and flue gas. In the second part the heat balance of the boiler, the boiler losses and the thermal efficiency are determined. After all the heating surfaces are calculed for the verify the dimensions. In the conclusion of the thesis we looked for the temperature range which is used for the SCR application. Then the improvements for the appropriate temperature range are designed.

Fouling of tube bundles in boilers on the flue gas side affects not only the service life, but also the boiler heat output and increases maintenance and operating costs. Therefore, it is necessary to minimize or completely eliminate this process. This thesis focuses on comparison of the service life and the heat output of the tube bundles with and without deposit in the coal fired boiler. Simulations of flue gas flow in area of tube bundles with and without deposit are performed using ANSYS Fluent software, which shows that the surface of tube bundles with deposit is much less heated than the surface without deposit. The thermal loads of tubes obtained by the CFD analysis are applied to the model, which is created in the program ANSYS Mechanical, where the calculation of the temperature field in the cross section of the pipe is realized. The effect of fouling on creep life and heat output is then evaluated based on simulation results. The results show that fouling increases creep life, but significantly reduces heat output of heavily fouled tubes. Hence the flue gas flows at a higher temperature to the rest of the tube bundle, and the service life of those tubes will therefore probably decrease.

The topic of this diploma thesis is to design the co-firing of blast furnace gas and coke-oven gas. First, the stoichiometric calculation for the gas mixture was made. It is followed with the determination of basic measures of heating surfaces and with their thermal calculation. The part of the work is also the drawing documentation of the boiler.