The aim of this diploma thesis is the construction design of the steam boiler burning biomass according to the set parametres (450°C, 5,2MPa, 5,83kg/s).There are main parts to solve and design: stoichiometry, energy balance, combustion chamber, heat-delivery surface and strenght calculation output chest of superheater.

This diploma thesis deals with a design of a boiler for stillage combustion. Stoichiometric calculations and enthalpies of combustion gases have been calculated from the specified parameters. In addition, heat calculation, design of the combustion chamber dimensions and dimensioning of heat surfaces were accomplished. The boiler has an evaporator with natural circulation and a fire grate.

The topic of this thesis is the calculation of the steam-boiler. The begining of the thesis deals with stoichiometric calculations. In the second chapter is performed the heat balance of the boiler. In the fourth and fifth chapter are defined dimensions of the fire and is established the temperature of a combustion gas in the outlet from the fire. The fifth chapter includes the balance calculations of the particular heating surfaces of the steam-boiler. As a conclusion of the calculations of the steam-boiler is performed the total balance. In the last chapter are proposed the methods for a reduction of the quantity of NOx contained in the combustion gas.

This diploma thesis deals constructional and calculation design of the steam boiler 60t/h of clean burning wood. For the parameters of the stoichiometric calculations are carried out and enthalpy calculations of combustion and air. The collected data is then made It a diagram of air and flue gas. The following are the calculations with the heat balance calculations of losses and determination of the boiler thermal efficiency of the boiler. It is made of the combustion chamber design and its thermal calculation. After determining the main dimensions of the combustion chamber moves continue the calculation of boiler heating surfaces. At the end of the calculations are controlling the overall energy balance. Boiler output parameters as temperature, pressure and quantity of the steam.

Subject of the present Ing. thesis is problem of incineration of sewage sludge and influence of lime on production of editions. In work are described kinds of sewage sludge combustion and possibilities of edition cleaning. Work includes design and description of experimental combustion of sewage sludge mixtured with kalcite in fluidized bed reactor. The end of work delal with, evaluation of editions from combustion experiment. Evaluated components of bunt gases are: heavy metals, TZL, SO2, CO, CO2, HCl, HF, O2, NO, PAH, PCB, PCDD/F.

An objective of this thesis is to design a grate steam boiler for burning straw. Generated steam will be used for technological purposes or cogeneration. Calculations of the heat comes from engaged temperature and pressure of the overheated steam and characteristics of characteristics of the biomass as well.

This thesis deals with reducing the moisture content of biomass drying and its subsequent use as biofuel. The work is a belt drying and its integration into the system with a grate boiler. It proposes a variety of drying options for use of different drying media. In the end, an economic evaluation of the combustion system uses a belt dryer, and a system without any possibility of drying the fuel before it enters the boiler.

Steam boiler for wood burning 50t/h In this diploma thesis I will deal design of the steam grate boiler 50t/h of burning clean wood. For the specified parameters make a stoichiometric calculations and calculate the enthalpy of the air and combustion. I shall calculate the heat balance, losses of boiler and thermal efficiency of the boiler. The following section make a design of the combustion chamber and its thermal calculation. After determining the dimensions of the combustion chamber further continue by calculating boiler moves and heating surfaces. Finally check the overall heat balance.

The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.

The aim of the work is to design a plain wood combustion boiler of 88 t/h output. Fuelling component analysis has been added to the basic boiler parameters. For given fuel is prepared stechiometric calculations. After making the heat balance of boiler is determined the thermal efficiency. For given output of steam parametrs (temparature, pressure, volume) are designed individual convective surfaces and dimensons of the boiler. It is also made drawings.