This master thesis deals with the current situation of waste management of material usable municipal waste with focus on various fractions of plastics. The theoretical part summarises the legislation of waste treatment, also contains an analysis of the current situation of waste management in the Czech Republic and comparison the situation in the European Union. In the next part of thesis are described basic fractions of plastics and their properties. There are mentioned the current problems with plastics processing and the risks of leakage to the environment. Furthermore, a complex chain of plastic waste reprocessing is described, since the inception of plastics waste to the manufacture of products made from recycled plastics. The most attention is paid to the discription of recycling plant, where the output material from sorting lines is reprocessed into a secondary material in the form of flakes or granules. Also this part is focused on the technology of recycling line and the individual devices are described. In the practical part of the thesis is created techno-economic model of recycling line with the aim of its use for balance calculations of recycling and also economic evaluation. As a part of the model was made a market research of secondary raw materials with a focus on price development. Subsequetly, sensitivity analyzes of selected parameters are applied to the model and the impact of scenarios on the economic results are evaluated.

This master thesis deals with the planning of routes and their operating parameters for the tram network in the new Brno city masterplan. The work evaluates operational and capital expenses that are bound up with running and further expanding of the tram system. The numbers of inhabitants and jobs included in 300-meter zones around tram stops were assessed. The calculated values are compared with the current situation. Based on the results, a suitable composition of the vehicle fleet and the order in which new tracks should be constructed is recommended. Further measures are proposed to improve coverage of city territories by the tram system, especially construction of tram ways to other densely populated areas of Brno and the organization of selected transfer points

In opening, this diploma thesis is introducing the company Daikin Device Czech s.r.o. In the next step the principle of function of a heat pump. Then there are described its main parts. First part of this thesis is dedicated to assembly line of the heat pump’s switchboxes. The layout of the assembly line is described and added with description of used health and quality measures. Main part is speaking about running test of the switchbox line. The main function of the test is described alongside with description of the process of making the testing software.

This master’s thesis solves the lean production’s methods implementation in the steps assembly department at the company IFE CR, a. s. The first part of the thesis describes the material and information flows and the most serious problems are identified in this part. On the basis of the analysis the optimized future state is designed and possible proposals of solutions are recommended to do for achieving this state. The solution of implementation of a new steps assembly line is solved in detail in the last part.

The topic of this thesis is a collection of objects of the postharvest line in the village Horní Moštěnice by the town Přerov. The thesis resolves the time schedule along with the financial plan. In the drawing of the constructional plant is being solved the establishment of the whole construction. Further is it the technical report, site engineering study and a noise study. The thesis is focused on the storage bins, for which is being developed a detailed time schedule, a budget, a drawing of the machine configuration, a technological standard for the assembly of the storage bins, the principles for the construction management, technical management of the constructional plant, control and test plan, safety and health at work protection and the construction site noise.

JURČA Jan: The manufacturing of sheet metal part by deep draw technology. Thesis of Master´s Studies, the 5th Year of Study, the School-year 2008/2009, The Institute of Manufacturing Technology, Department of Machining, FSI VUT Brno.The thesis deals with the project of manufacturing the part of the car body – the fifth door by deep draw technology. The material is zinc-coated sheet metal HX220YD EN 10292. Mechanical properties and suitability of the material are evaluated by mechanical tests. The structure of the material is evaluated by metalography scratch pattern. The analysis of draw process and manufacturability of the part is made by calculations and AutoForm software. The production line, necessary machinery and construction solution of draw tool for the manufacturing the part are determined. Last section deals with economical evaluation of the production.

The goal of this thesis was to devise appropriate improvements for the quality control tool JIDOKA used in Continental Automotive Systems Czech Republic s.r.o based in Frenštát pod Radhoštěm. First, three areas of concern requiring improvement pro-posals were identified. These were: visualization of the maximum amount of rejects, physical handling of rejects and documentation updates. This work comprises an introduction to the issue and the company, application principles of JIDOKA in Continental company and a description of the areas of concern. As a conclusion, solution proposals for given areas and their implementation are presented.

This diploma thesis is focused on the construction proposal of pallet hoist connected with powered section roller conveyor for transportation of europallets with loads 1200 kg. The proposed hoist is designed for vertical handling between two working positions with the distance 5 meters. The thesis contains all structural units of machine, design of all standars parts and control calculation of some parts using the finite element method (FEM). The thesis contains complete drawing documentation for designed machine.

This diploma thesis deals with the problem of operating costs analysis and their evaluation on the bus line No. 49 provided by Brno transport company. The first part is focused on history and current status of the Brno transport company. In the second part the route of the bus line No. 49 and technical parameters of Crossway Low Entry bus are further specified. Finally the thesis describes all costs to ensure the operation of this line.

This diploma thesis deal with analysis and evaluation of the operating costs of bus line no. 107 with emphasis of fuel costs. The first part is devoted to the history, formation of bus transport, foundation of selected bus company and current status. The second part deals with the selected bus line no. 107. The third part is devoted to analysis of operating costs. The last part proposes measures for eliminating the costs of fuel consumption.