No description available.

La phosphorylation des protéines constitue l’une des plus importantes modifications post-traductionnelles (PTMs) et intervient dans de multiples processus physiologiques tels, la croissance, la différenciation cellulaire, l’apoptose, etc. En dépit de son importance, l’analyse des phosphoprotéines demeure une tâche difficile en raison de leur nature dynamique (car la phosphorylation des protéines est un processus réversible) et de leur faible abondance relative. En effet, la détermination des sites de phosphorylation est souvent difficile car les phosphopeptides sont souvent difficiles à détecter par des méthodes d’analyse chromatographique classique et par spectrométrie de masse (MS). De récentes études ont démontré que les nombreuses méthodes d’enrichissement de phosphopeptides existantes ne sont pas complètes, et que le nombre total de phosphopeptides détectés ne chevauchent pas complètement ces méthodes. C’est pour cela qu’il existe une nécessité de combler les lacunes des méthodes d’enrichissement existantes afin d’avoir des analyses phosphoprotéomiques plus complètes. Dans cette étude, nous avons utilisé les liquides ioniques (LI), plus particulièrement les sels d’imidazolium, comme une technique d’enrichissement alternative, dans le but de favoriser une extraction sélective de phosphopeptides présents en solution. Les sels d’imidazolium ont donc été utilisés en raison de leurs propriétés physico-chimiques "facilement" ajustables selon la nature des substituants sur le noyau imidazolium et la nature de l’anion. Les sels de monoimidazolium et de bis-imidazolium possédant respectivement des chaînes linéaires à 4, 12 et 16 atomes de carbone et ayant différents anions ont été synthétisés et utilisés pour effectuer des extractions liquide-liquide et solide-liquide des phosphopeptides en solution. Dans un premier temps, des extractions liquide-liquide ont été réalisées en utilisant un liquide ionique (LI) ayant une chaine linéaire de 4 atomes de carbone. Ces extractions réalisées avec le bis(trifluoromethanesulfonyl) amide de 3-butyl-1-methylimidazolium (BMIM-NTf2) et l’hexafluorophosphate de 3-butyl-1-methylimidazolium (BMIM-PF6) n’ont pas montré une extraction notable du PPS comparativement au PN. Dans un deuxième temps, des extractions solide-liquide ont été réalisées en fonctionnalisant des particules solides avec des sels d’imidazolium possédant des chaines linéaires de 12 ou 16 atomes de carbone. Ces extractions ont été faites en utilisant un phosphopentapeptide Ac-Ile-pTyr-Gly-Glu-Phe-NH2 (PPS) en présence de 2 analogues acides non-phosphorylés. Il a été démontré que les sels d’imidazolium à chaine C12 étaient meilleurs pour extraire le PPS que les deux autres peptides PN (Ac-Ile-Tyr-Gly-Glu-Phe-NH2) et PE (Ac-Glu-Tyr-Gly-Glu-Phe-NH2) L’électrophorèse capillaire (CE) et la chromatographie liquide à haute performance couplée à la spectrométrie de masse (LC-MS) ont été utilisées pour quantifier le mélange des trois peptides avant et après extraction ; dans le but de mesurer la sélectivité et l’efficacité d’extraction de ces peptides par rapport à la composition chimique du liquide ionique utilisé. / Protein phosphorylation is one of the most important post-translational modifications because it is involved in multiple physiological processes such as growth, differentiation, apoptosis, etc. Despite its importance, the analysis of phosphoproteins remains a difficult task due to their dynamic nature (phosphorylation of proteins is a reversible process) and their low abundance. Indeed, the determination of phosphorylation sites is difficult because phosphopeptides are often difficult to detect by conventional chromatographic analysis and by mass spectrometric (MS) methods. Recent studies have shown that the existing methods of enrichment of phosphopeptides are not complete, and the total number of phosphopeptides detected does not overlap completely with those detected by these methods. The gaps in existing enrichment methods need to be filled in order to have more complete phosphoproteomic analyses. In the current study, ionic liquids (IL), specifically imidazolium salts, have been used in an alternative enrichment technique with potential for selective extraction of phosphopeptides from solution. Imidazolium salts were chosen because their physicochemical properties are readily adjustable depending on the nature of the substituent attached to the imidazolium core and the counter-anion. Monoimidazolium and bis-imidazolium salts with linear chains having respectively 4, 12, and 16 carbon atoms and with different anions were synthesized and used to carry out liquid-liquid and solid-liquid extractions of a phosphorylated peptide from a solution. At first, liquid-liquid extractions were carried out using an ionic liquid (IL) with a linear chain of 4 carbon atoms. These extractions performed with bis (trifluoromethanesulfonyl) amide 3-butyl-1-methylimidazolium (BMIM-NTf2) and hexafluorophosphate 3-butyl-1-methylimidazolium (BMIM-PF6) did not show a considerable extraction of PPS comparatively to the PN. Secondly, solid-liquid extractions were done by first functionalizing solid-phase particles with the imidazolium salts. The extractions were carried out using the phosphopentapeptide Ac-pTyr-Ile-Gly-Glu-Phe-NH2 (PPS) and its acidic non-phosphorylated analogues. It has been shown that the C12 chain imidazolium salts were better to extract PPS than the other two peptides PN (Ac-Ile-Tyr-Gly-Glu-Phe-NH2) and PE (Ac-Glu-Tyr-Gly-Glu-Phe-NH2). The extraction efficiency of these peptides was estimated by capillary electrophoresis (CE) and high performance liquid chromatography coupled with mass spectrometry (LC-MS).

Bifenilas policloradas (PCBs) são componentes de óleo ascarel, usado extensamente (no Brasil até os anos 80) como isolante em transformadores de energia devido às suas propriedades físico-químicas como estabilidade térmica e alta constante dielétrica. Apesar de ter sido proibido em todo o mundo devido à alta toxicidade dos PCBs presentes em sua composição, ainda resta grande quantidade de ascarel em circulação como resíduo \"passivo\" e resultante de contaminação em trocas dos fluidos dos transformadores, além de vazamentos. A principal forma de eliminação é por incineração, que, além de ser um processo caro, pode provocar a formação de compostos mais tóxicos, as dioxinas. Por isso é importante o monitoramento da concentração dessas substâncias, a fim de evitar maiores impactos ambientais na sua disposição, bem como em estudos de biodegradação. Esta matriz é extremamente complexa, o que torna a extração e determinação desses analitos um processo trabalhoso e difícil. Neste trabalho avaliaram-se métodos de extração e determinação de PCBs presentes na solução padrão comercial PCB Congener MIX 1, SUPELCO (PCBs 10, 28, 52, 138, 153 e 180). O desenvolvimento de métodos de extração (cromatografia em coluna, extração líquido-líquido (L-L), extração em fase sólida (SPE) e micro-extração em fase sólida - SPME) dos PCBs foi seguido da determinação, por cromatografia gasosa com detector por captura de elétrons (CG/DCE), em três matrizes diferentes: óleo ascarel, amostras provenientes de reatores anaeróbios em batelada e solo. Os métodos cuja purificação e extração diminuíram o efeito dos interferentes da matriz, como SPE - Sulfoxide, cromatografia em coluna de sílica e extração L-L com n-hexano foram validados pela avaliação dos seguintes parâmetros: linearidade e faixa de aplicação; precisão instrumental; limite de detecção, limite de quantificação e recuperação absoluta. O critério de escolha entre os métodos para extração dos PCBs do óleo que forneceram maior eficiência (cartucho SPE Sulfoxide e coluna de sílica gel, após lavagem ácida; método da adição de padrão, entre 1,0 e 4,0 mg L-1) deve considerar a disponibilidade de recursos, pois a sílica gel é mais viável economicamente do que o cartucho SPE. Os valores de R2 > 0,99 para o método de extração com sílica, mesmo tendo sido considerados apenas três pontos para a curva de calibração, atestam maior linearidade do que o método com SPE Sulfoxide (R2 entre 0,97 e 0,99). A extração L-L e determinação por CG/DCE dos PCBs (padronização interna) de amostras provenientes de reatores anaeróbios em batelada (aquosas, em matriz extremamente complexa com biomassa e espuma de poliuretano para imobilização de microrganismos) foram eficientes na faixa de concentração entre 0,05 e 0,5 mg L-1. Esse método foi adequado para monitorar PCBs em estudo de degradação anaeróbia e teste de adsorção dos PCBs em espuma; forneceu linearidade com R2 entre 0,93 e 0,96 e limites de detecção de 0,048 a 0,298 mg L-1, além de recuperação absoluta entre 14,1% e 110,7%. As condições testadas por SPME não permitiram a extração dos PCBs de óleo e de solo, principalmente devido à dessorção incompleta dos PCBs da fibra de polidimetil-siloxano, de 100 μm. / Polychlorinated biphenyls (PCBs) are components of ascarel, oil widely used as insulation (until the \'80s in Brazil) due to its physicochemical properties such as thermal stability and high dielectric constant. Despite having been banned worldwide due to the high toxicity of PCBs present in its composition, there are still lots of outstanding ascarel as \"passive\" residue and resulting contamination of fluids in transformers exchanges, plus leaks. The main form of disposal is incineration, which, besides being costly, can cause the formation of more toxic compounds, that is, dioxins. It is therefore important to monitor the concentration of these substances in order to prevent further environmental impacts in their disposal, as well as in studies of biodegradation. This is an extremely complex matrix, which makes the extraction and determination of this analytes very difficult and labor intensive. In this work we have evaluated methods of extraction and determination of the PCBs present in the standard solution Congener MIX 1, SUPELCO (PCBs 10, 28, 52, 138, 153 e 180). The extraction and cleanup developed methods which reduced the effects of interfering matrix as solid phase extraction (SPE) - Sulfoxide, column chromatography on silica and liquid-liquid (L-L) extraction with n-hexane, and solid phase microextraction (SPME) after determination of the PCBs by gas chromatography with electron capture detector (GC/ECD) were validated by assessing the following parameters: linearity and range of application; instrumental precision; detection limit; limit of quantification and absolute recovery. The criterion for choosing between the methods for extraction of PCBs from the oil with a higher efficiency (SPE cartridge Sulfoxide and silica gel column, after acid washing; using the standard addition method, between 1.0 and 4.0 mg L-1) must evaluate the availability resources, since the silica gel is more economically viable than the SPE cartridge. The R2 values > 0.99 for silica extraction method, even though it was considered only three points for the calibration curve, attested higher linearity than the method with SPE Sulfoxide (R2 between 0.97 and 0.99). The L-L extraction and determination by GC/ECD of the PCBs (internal standardization) of samples from batch anaerobic reactors (aqueous, in a very complex matrix with biomass and polyurethane foam for the immobilization of microorganisms) were efficient in the concentration range between 0.05 and 0.5 mg L-1. This method was suitable to monitor PCBs in anaerobic degradation studies and its adsorption on foam; provided R2 linearity between 0.93 and 0.96 and detection limits from 0.048 to 0.298 mg L-1, as well as absolute recovery between 14.1% and 110.7%. The conditions tested for SPME technique did not allow the extraction of the PCBs from the oil and soil, mainly due to the \"incomplete dessorption\" of PCBs from the polydimethylsiloxane fiber of 100 micron.

Sistemas de análises químicas em fluxo com multi-impulsão empregam bombas solenoide como unidade propulsora de fluidos, as quais proporcionam fluxos pulsados. Estes provêm um eficiente transporte radial de massas, o que garante boa homogeneização das soluções envolvidas, mesmo em situações de dispersão limitada. O objetivo principal deste trabalho foi então comparar o desempenho de metodologias envolvendo reagentes imobilizados em sistemas de análises em fluxo com fluxos constantes ou pulsados. Para isto, foram selecionadas as determinações espectrofotométricas de ácido ascórbico em produtos farmacêuticos, utilizando reator tubular de polietileno (50 cm) com MnO2(s) imobilizado, e reação com formaldoxima (0,25 mol L-1); e de carbaril em águas naturais, explorando extração líquido-líquido com xileno imobilizado em membrana de PVDF, e solução de NaOH a 0,1 mol L-1 como fluxo aceptor. Adicionalmente, compararam-se os dois tipos de fluxo em uma nova titulação em fluxo, a titulação monitorada por traçador; a determinação de acidez total em vinagres foi selecionada e utilizaram-se as titulações por injeção em fluxo e programada em triângulo, ambas empregando solução de NaOH a 0,01 mol L-1 como titulante e fenolftaleína como indicador ácido-base, com monitoramento por traçador empregando azul brilhante FCF (ca. 6 mg L-1). Na determinação de ácido ascórbico, o desempenho do sistema com fluxos pulsados foi superior àquele com fluxos constantes quanto ao limite de detecção: 0,33 contra 0,60 mg L-1 (critério 3,3 ?), e à repetibilidade: d.p.r. estimado como 2,5 contra 5,6% (n = 20); quanto à exatidão, não foi encontrada diferença estatisticamente significativa entre o método proposto e o da Farmacopeia Britânica ao nível de confiança de 95%. Na determinação de carbaril, o uso de fluxos pulsados favoreceu a extração do analito, obtendo-se uma sensibilidade 9,3% maior relativamente ao emprego de fluxos constantes, além de uma melhor linearidade da curva analítica; entretanto, o método mostrou-se susceptível a interferência de outros metilcarbamatos, o que comprometeu sua aplicação à análise de águas naturais. Na determinação de acidez total, a exploração de fluxos pulsados proporcionou menores variações da razão dos valores de absorbância relativos ao monitoramento do traçador e do indicador; não foi encontrada diferença estatística entre as titulações em fluxo propostas e o método titulométrico de referência ao nível de confiança de 95% / Multi-pumping flow systems use solenoid pumps as fluid propelling devices, which deliver pulsed flows. These flows provide an efficient radial mass transport, thus good mixing conditions even in limited sample dispersion situations. The main objective of this work was then to compare the performance of methodologies involving immobilized reagents in flow systems with constant or pulsed flows. To this end, the spectrophotometric determinations of ascorbic acid in pharmaceutical products using a 50-cm polyethylene tubular reactor with immobilized MnO2(s) with further colour-forming reaction with 0.25 mol L-1 formaldoxime; and carbaryl in natural waters exploiting liquid-liquid extraction with xylene immobilized in a PVDF membrane and a 0.1 mol L-1 ¬¬NaOH solution as acceptor stream, were selected. Moreover, constant and pulsed flows were compared in relation to a novel strategy for flow titration, named tracer-monitored titration; the determination of total acidity in vinegars was selected and flow injection and triangle-programmed titrations were applied, both using a 0.01 mol L-1 NaOH solution as titrant, phenolphtalein as acid-base indicator and ca. 6 mg L-1 brilliant blue FCF as tracer. Regarding ascorbic acid determination, the pulsed flow system was superior in relation to the constant flow system for detection limit: 0.33 against 0.60 mg L-1 (3.3 ? criterion), and for repeatability: r.s.d. estimated as 2.5 against 5.6% (n = 20); in relation to accuracy, no significant differences between the proposed method and that of the British Pharmacopoeia were found at the 95% confidence level. Regarding carbaryl determination, use of pulsed flows favored the analyte extraction, leading to a 9.3% sensitivity improvement in relation to use of constant flows; besides the attainment of better linearity of the analytical curve. The method was however susceptible to interference of other methylcarbamates, thus the application to natural water analyses was impaired. Regarding total acidity determination, pulsed flows exploitation provided lower variations in the ratio of absorbance values related to the monitoring of tracer and indicator; no significant differences between the proposed titrations and the reference method were found at the 95% confidence level

Bifenilas policloradas (PCBs) são componentes de óleo ascarel, usado extensamente (no Brasil até os anos 80) como isolante em transformadores de energia devido às suas propriedades físico-químicas como estabilidade térmica e alta constante dielétrica. Apesar de ter sido proibido em todo o mundo devido à alta toxicidade dos PCBs presentes em sua composição, ainda resta grande quantidade de ascarel em circulação como resíduo \"passivo\" e resultante de contaminação em trocas dos fluidos dos transformadores, além de vazamentos. A principal forma de eliminação é por incineração, que, além de ser um processo caro, pode provocar a formação de compostos mais tóxicos, as dioxinas. Por isso é importante o monitoramento da concentração dessas substâncias, a fim de evitar maiores impactos ambientais na sua disposição, bem como em estudos de biodegradação. Esta matriz é extremamente complexa, o que torna a extração e determinação desses analitos um processo trabalhoso e difícil. Neste trabalho avaliaram-se métodos de extração e determinação de PCBs presentes na solução padrão comercial PCB Congener MIX 1, SUPELCO (PCBs 10, 28, 52, 138, 153 e 180). O desenvolvimento de métodos de extração (cromatografia em coluna, extração líquido-líquido (L-L), extração em fase sólida (SPE) e micro-extração em fase sólida - SPME) dos PCBs foi seguido da determinação, por cromatografia gasosa com detector por captura de elétrons (CG/DCE), em três matrizes diferentes: óleo ascarel, amostras provenientes de reatores anaeróbios em batelada e solo. Os métodos cuja purificação e extração diminuíram o efeito dos interferentes da matriz, como SPE - Sulfoxide, cromatografia em coluna de sílica e extração L-L com n-hexano foram validados pela avaliação dos seguintes parâmetros: linearidade e faixa de aplicação; precisão instrumental; limite de detecção, limite de quantificação e recuperação absoluta. O critério de escolha entre os métodos para extração dos PCBs do óleo que forneceram maior eficiência (cartucho SPE Sulfoxide e coluna de sílica gel, após lavagem ácida; método da adição de padrão, entre 1,0 e 4,0 mg L-1) deve considerar a disponibilidade de recursos, pois a sílica gel é mais viável economicamente do que o cartucho SPE. Os valores de R2 > 0,99 para o método de extração com sílica, mesmo tendo sido considerados apenas três pontos para a curva de calibração, atestam maior linearidade do que o método com SPE Sulfoxide (R2 entre 0,97 e 0,99). A extração L-L e determinação por CG/DCE dos PCBs (padronização interna) de amostras provenientes de reatores anaeróbios em batelada (aquosas, em matriz extremamente complexa com biomassa e espuma de poliuretano para imobilização de microrganismos) foram eficientes na faixa de concentração entre 0,05 e 0,5 mg L-1. Esse método foi adequado para monitorar PCBs em estudo de degradação anaeróbia e teste de adsorção dos PCBs em espuma; forneceu linearidade com R2 entre 0,93 e 0,96 e limites de detecção de 0,048 a 0,298 mg L-1, além de recuperação absoluta entre 14,1% e 110,7%. As condições testadas por SPME não permitiram a extração dos PCBs de óleo e de solo, principalmente devido à dessorção incompleta dos PCBs da fibra de polidimetil-siloxano, de 100 μm. / Polychlorinated biphenyls (PCBs) are components of ascarel, oil widely used as insulation (until the \'80s in Brazil) due to its physicochemical properties such as thermal stability and high dielectric constant. Despite having been banned worldwide due to the high toxicity of PCBs present in its composition, there are still lots of outstanding ascarel as \"passive\" residue and resulting contamination of fluids in transformers exchanges, plus leaks. The main form of disposal is incineration, which, besides being costly, can cause the formation of more toxic compounds, that is, dioxins. It is therefore important to monitor the concentration of these substances in order to prevent further environmental impacts in their disposal, as well as in studies of biodegradation. This is an extremely complex matrix, which makes the extraction and determination of this analytes very difficult and labor intensive. In this work we have evaluated methods of extraction and determination of the PCBs present in the standard solution Congener MIX 1, SUPELCO (PCBs 10, 28, 52, 138, 153 e 180). The extraction and cleanup developed methods which reduced the effects of interfering matrix as solid phase extraction (SPE) - Sulfoxide, column chromatography on silica and liquid-liquid (L-L) extraction with n-hexane, and solid phase microextraction (SPME) after determination of the PCBs by gas chromatography with electron capture detector (GC/ECD) were validated by assessing the following parameters: linearity and range of application; instrumental precision; detection limit; limit of quantification and absolute recovery. The criterion for choosing between the methods for extraction of PCBs from the oil with a higher efficiency (SPE cartridge Sulfoxide and silica gel column, after acid washing; using the standard addition method, between 1.0 and 4.0 mg L-1) must evaluate the availability resources, since the silica gel is more economically viable than the SPE cartridge. The R2 values > 0.99 for silica extraction method, even though it was considered only three points for the calibration curve, attested higher linearity than the method with SPE Sulfoxide (R2 between 0.97 and 0.99). The L-L extraction and determination by GC/ECD of the PCBs (internal standardization) of samples from batch anaerobic reactors (aqueous, in a very complex matrix with biomass and polyurethane foam for the immobilization of microorganisms) were efficient in the concentration range between 0.05 and 0.5 mg L-1. This method was suitable to monitor PCBs in anaerobic degradation studies and its adsorption on foam; provided R2 linearity between 0.93 and 0.96 and detection limits from 0.048 to 0.298 mg L-1, as well as absolute recovery between 14.1% and 110.7%. The conditions tested for SPME technique did not allow the extraction of the PCBs from the oil and soil, mainly due to the \"incomplete dessorption\" of PCBs from the polydimethylsiloxane fiber of 100 micron.

Les sous-produits qui proviennent de l’industrie du bois, particulièrement les nœuds, contiennent différents types de molécules qui peuvent être valorisées comme source de composants bioactifs pouvant répondre à des besoins thérapeutiques. C’est sur cette idée que le projet "Le Bois Santé" a été conçu. Grâce à la collaboration de plusieurs partenaires, le présent travail vise dans un premier temps à développer des procédés d’extraction "verts" (solide-liquide et supercritique) pour obtenir un extrait riche en lignanes à partir d’un mélange de nœuds d’épicéa commun et de sapin pectiné. Les effets des conditions opératoires sur le rendement d’extraction de chaque composé cible et sur l’activité anti-oxydante des extraits ont été déterminés. Afin d’étudier le procédé complet, le projet vise à étudier l’impact des procédés de concentration et de séchage de l’extrait à partir de l’évaporation sous vide et de la lyophilisation. De plus, la séparation et la purification des composés ont été développées et optimisées par simulation grâce à la technique de chromatographie frontale / By-products from wood industry, particularly knots, contain different types of molecules that can be valued as a source of bioactive components meeting therapeutic needs. It is on this idea that the project "Le Bois Santé" was designed. Through the collaboration of several partnerships, the present work aims initially to develop a "green" extraction processes (solid-liquid and supercritical) to obtain an extract rich in lignans from a mixture of norway spruce and silver fir knots. The effects of operating conditions on the extraction yield of each target compound and the antioxidant activity of the extracts were determined. To understand the entire process, the project aims to investigate the impact of concentration and drying processes using vacuum evaporation and lyophilisation. Moreover, the separation and purification of the compounds have been developed and optimized using frontal chromatography technique

Profenofós é um organofosforado empregado como inseticida e acaricida amplamente utilizado no Brasil para o controle de pragas de cebolas, milho, soja, café, tomate, algodão, feijão, batata e outros. A irradiação é um processo empregado em todo o mundo e recomendada por diversos órgãos de saúde para a conservação de alimentos. A radiação ionizante utiliza raios gama, raios X ou aceleradores de elétrons e tem sido aplicada para eliminar ou reduzir a ação de agentes patogênicos e contribuir para aumentar o tempo de estocagem de vários alimentos. Os objetivos desse trabalho foram: (a) avaliar a degradação de soluções aquosas de profenofós submetidas à radiação ionizante, identificar e quantificar a formação de novos produtos por GC-MS; (b) analisar o efeito de feixe de elétrons em ervilhas inoculadas com soluções aquosas de profenofós; (c) sintetizar Polímeros Molecularmente Impressos (MIP) e Sílica Impressa Molecularmente (MIS), posteriormente, caracterizar os adsorventes em fase sólida e verificar sua seletividade para profenofós. O tratamento com aceleradores de elétrons com dose 31,6 kGy promoveu a formação de um novo produto de degradação e redução de 93,40 % de profenofós em soluções aquosas. Em ervilhas inoculadas com 1 μg de profenofós submetidas à radiação ionizante de 30,4 kGy promoveu uma redução na concentração de profenofós em 57,46 %. Além disso, foram realizadas sínteses de MIP e MIS para a extração em fase sólida de profenofós. Os MIS sintetizados por sol-gel mostraram-se eficazes para o reconhecimento molecular e extração seletiva de profenofós. / Profenofos is an organophosphate widely used in Brazil as insecticide and acaricide in the control of pests in onions, corn, soybeans, coffee, tomato, cotton, beans, potatoes among others. Irradiation is a process used worldwide and recommended by many health agencies for food preservation. Food irradiation preserving process uses accelerated electrons, gamma rays or X-rays. Ionizing radiation treatment is applied to eliminate or to reduce the action of pathogens and to increase the shelf life of some foods. The objective of this study were (a) to evaluate the degradation of aqueous solutions of Profenofos by ionizing radiation, identify and quantify the formation of new products by GC-MS; (b) to analyze the effects of electron beam in peas inoculated with aqueous solutions of Profenofos; (c) to synthesize Molecularly Imprinted Polymer (MIP) and Molecularly Imprinted Silica (MIS), subsequently characterize the adsorbents in solid phase and check its selectivity for profenofos. The treatment with electron accelerators with 31.6 kGy dose promoted the formation of a new by-product and 93.40 % reduction of profenofos in aqueous solutions. In peas inoculated with 1 μg of profenofos by ionizing radiation of 30.4 kGy promoted a reduction of 57.46 % in the concentration of profenofos. Furthermore, the MIP and MIS were performed for solid phase extraction of profenofos. The MIS synthesized by sol-gel proved to be effective for the recognition molecular and selective extraction of profenofos.

Profenofós é um organofosforado empregado como inseticida e acaricida amplamente utilizado no Brasil para o controle de pragas de cebolas, milho, soja, café, tomate, algodão, feijão, batata e outros. A irradiação é um processo empregado em todo o mundo e recomendada por diversos órgãos de saúde para a conservação de alimentos. A radiação ionizante utiliza raios gama, raios X ou aceleradores de elétrons e tem sido aplicada para eliminar ou reduzir a ação de agentes patogênicos e contribuir para aumentar o tempo de estocagem de vários alimentos. Os objetivos desse trabalho foram: (a) avaliar a degradação de soluções aquosas de profenofós submetidas à radiação ionizante, identificar e quantificar a formação de novos produtos por GC-MS; (b) analisar o efeito de feixe de elétrons em ervilhas inoculadas com soluções aquosas de profenofós; (c) sintetizar Polímeros Molecularmente Impressos (MIP) e Sílica Impressa Molecularmente (MIS), posteriormente, caracterizar os adsorventes em fase sólida e verificar sua seletividade para profenofós. O tratamento com aceleradores de elétrons com dose 31,6 kGy promoveu a formação de um novo produto de degradação e redução de 93,40 % de profenofós em soluções aquosas. Em ervilhas inoculadas com 1 μg de profenofós submetidas à radiação ionizante de 30,4 kGy promoveu uma redução na concentração de profenofós em 57,46 %. Além disso, foram realizadas sínteses de MIP e MIS para a extração em fase sólida de profenofós. Os MIS sintetizados por sol-gel mostraram-se eficazes para o reconhecimento molecular e extração seletiva de profenofós. / Profenofos is an organophosphate widely used in Brazil as insecticide and acaricide in the control of pests in onions, corn, soybeans, coffee, tomato, cotton, beans, potatoes among others. Irradiation is a process used worldwide and recommended by many health agencies for food preservation. Food irradiation preserving process uses accelerated electrons, gamma rays or X-rays. Ionizing radiation treatment is applied to eliminate or to reduce the action of pathogens and to increase the shelf life of some foods. The objective of this study were (a) to evaluate the degradation of aqueous solutions of Profenofos by ionizing radiation, identify and quantify the formation of new products by GC-MS; (b) to analyze the effects of electron beam in peas inoculated with aqueous solutions of Profenofos; (c) to synthesize Molecularly Imprinted Polymer (MIP) and Molecularly Imprinted Silica (MIS), subsequently characterize the adsorbents in solid phase and check its selectivity for profenofos. The treatment with electron accelerators with 31.6 kGy dose promoted the formation of a new by-product and 93.40 % reduction of profenofos in aqueous solutions. In peas inoculated with 1 μg of profenofos by ionizing radiation of 30.4 kGy promoted a reduction of 57.46 % in the concentration of profenofos. Furthermore, the MIP and MIS were performed for solid phase extraction of profenofos. The MIS synthesized by sol-gel proved to be effective for the recognition molecular and selective extraction of profenofos.

Large numbers of samples often need to be prepared and analysed in surveys of organic pollutants in the environment, but while the methods commonly used in such surveys can provide abundant detail they are generally costly, time-consuming and require large amounts of resources, so there is a need for simpler techniques. The work underlying this thesis assessed the potential utility of more convenient sample preparation and bioanalytical techniques for rapidly screening various environmental matrices that could be useful complements to higher resolution methods. Initially, the utility of a simplified extraction technique followed by an enzyme-linked immunosorbent assay (ELISA) for detecting polycyclic aromatic hydrocarbons (PAHs) in authentic (i.e. unspiked) contaminated soils was explored. The results showed that there are relationships between the structure and cross-reactivity among compounds that often co-occur with target PAHs. However, their potential contribution to deviations between estimates of total PAH contents of soils obtained using ELISA and gas chromatography-mass spectrometry (GC-MS) based reference methods were limited. Instead, the cross-reactivity of target PAHs and the failure to extract all of the PAHs prior to the ELISA determinations were the main reasons for these deviations. Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were detected in food and feed matrices, as well as in authentic contaminated soils using different bioanalytical techniques – ELISA and two cell-based bioassays: CAFLUX and CALUX (chemically activated fluorescent/luciferase gene expression) assays. In addition, enhanced sample preparation techniques based on accelerated solvent extraction (ASE) were developed. ASE with integrated carbon fractionation (ASE-C) in combination with CAFLUX produced estimates of PCDD and PCDF contents in fish oil and fish meal that agreed well with results obtained using reference methods. Furthermore, results from ELISA and GC-high resolution MS analyses of extracts of PCDD- and PCDF-contaminated soil samples obtained using an adjusted ASE-C technique were strongly correlated. Finally, the thesis reports the first experiments in which the results of CAFLUX, CALUX, and ELISA determinations of PCDDs and PCDFs in extracts of authentic contaminated soil samples were evaluated and compared to those obtained using a reference method. All of the bioanalytical techniques were found to be sufficiently sensitive, selective, and accurate for use in screening in compliance with soil quality assessment criteria. Overall, the improved sample preparation and bioanalytical techniques examined proved to be useful potential complements to conventional methods, enhancing the analytical framework for PAHs, PCDDs, and PCDFs. However, further validation has to be undertaken before they are applied on a large-scale.

Das Ziel der vorliegenden Arbeit bestand in der Synthese von neuen funktionalisierten tripodalen Azaliganden auf Basis von Tris(2-aminoethyl)amin (Tren) und ihrer Charakterisierung als Rezeptoren und Extraktionsmittel für Kationen, Anionen sowie Salze. Die Komplexbildungs- und Phasentransfereigenschaften gegenüber den Kationen Ag(I), Co(II), Ni(II), Cu(II), Zn(II) und Cd(II) sowie den Anionen Cl-, Br-, I-, H2PO4-, SO42- und HCrO4- wurden durch Flüssig-Flüssig-Extraktion und Flüssigmembrantransport, 1H-NMR-Spektroskopie sowie Silberpotentiometrie untersucht; Struktur-Wirkungsbeziehungen für die jeweiligen Wirt/Gast-Systeme wurden abgeleitet. Röntgenkristallstrukturanalysen ausgewählter Komplexe mit den Kationen Ag(I), Ni(II) und Cu(II), den Anionen Br- und BF4- sowie dem Salz Hg(ClO4)2 ergänzten die gewonnenen Aussagen durch detaillierte Informationen zur Struktur und zu den auftretenden Wechselwirkungen. In die Betrachtungen wurden vergleichende Untersuchungen zur Ag(I)-Bindung durch strukturverwandte tripodale Schiffsche Basen einbezogen. Zusammenfassend wird der Einfluss der unterschiedlichen ligandspezifischen Charakteristika sowie der Substratspezies auf die Komplexbildung in Lösung und die Festkörperstruktur diskutiert. Die untersuchten tripodalen Aminverbindungen auf Basis von Tren zeigten in Abhängigkeit von ihrer Struktur ein differenziertes Extraktionsverhalten im System Metallsalz-Puffer-Wasser/Ligand-Chloroform. Als wesentliche Einflussfaktoren auf die Extraktion erwiesen sich Art, Anzahl und Anordnung der Donoratome sowie die differenzierte Lipophilie der Liganden. Die Zusammensetzung der extrahierten Komplexe in der organischen Phase ergab sich in den meisten Fällen zu 1:1 (Ag(I) : Ligand). Die bestimmte Reihe steigender Komplexstabilität für die 1:1-Komplexe von Ag(I) in Methanol unterstreicht in Analogie zu den Extraktionsuntersuchungen den Einfluss der Ligandcharakteristika auf die Komplexbildung. So führten Liganden mit tertiären Aminstickstoffatomen, zusätzlichen O-Donoratomen sowie sterisch anspruchsvollen Substituenten im Molekül zu geringeren Komplexstabilitäten, während zusätzliche S- und Pyridin-N-Donoratome in den untersuchten Aminverbindungen eine deutliche Steigerung der bestimmten Konstanten ergaben. Vergleichende Untersuchungen mit tripodalen Iminopodanden zeigten mit Ausnahme des 2-pyridylmethyl-substituierten Liganden generell niedrigere Stabilitäten der Ag(I)-Komplexe. 1H-NMR-Untersuchungen zur Komplexbildung in Lösung deuten unter veränderten Bedingungen auch auf einen möglichen Wechsel in der Komplexzusammensetzung und im Bindungsmuster für Ag(I) in Abhängigkeit von den im Molekül vorhandenen Donorfunktionen hin. Während für N4-Liganden ohne zusätzliche Donoratome sowie in Anwesenheit von S- und N-Donoratomen eine Zusammensetzung (Ag(I) : Ligand) von 1:1 bestimmt wurde, führen zusätzliche Pyridin-N-Donoratome zu einem stöchiometrischen Verhältnis von 3:2. Die Röntgenstrukturanalysen der Ag(I)-Komplexe von tripodalen Schiffschen Basen mit unterschiedlichen Substituenten unterstreichen die Variabilität der Koordinationsgeometrie von Ag(I) in Abhängigkeit vom Liganden. Interessant ist die Ausbildung von schwachen C-H···Ag-Wasserstoffbrücken in den Ag(I)-Komplexen der benzyl- und 4-biphenylmethyl-substituierten Liganden. Für die Kationen Co(II) und Zn(II) wurden mit den untersuchten Liganden generell nur geringe Extrahierbarkeiten erzielt. Dabei ist der Einfluss von Ligandstruktur sowie Lipophilie der Verbindungen auf die Extraktion stärker ausgeprägt als für Ag(I). Die Extraktion aus einem Gemisch von Co(II), Ni(II), Cu(II), Zn(II) und Cd(II) zeigte generell einen Anstieg der Extraktion in der Reihe Co(II) < Ni(II) < Zn(II) < Cd(II) < Cu(II). Lediglich die Verbindung mit einer OH-Funktion in 2-Position der aromatischen Substituenten führte zu höheren Extraktionsausbeuten für Co(II), Ni(II) und Cd(II) gegenüber Cu(II) und Zn(II). Röntgenstrukturanalysen von vier Cu(II)- bzw. Ni(II)-Komplexen veranschaulichen die bevorzugte höhere Koordinationszahl dieser Metallionen in relevanten Komplexen im Vergleich zu Ag(I). Die höhere Koordinationszahl wird dabei durch eine zusätzliche Koordination von Anionen oder Lösungsmittelmolekülen erreicht. Im Gegensatz zu den Kationen ist die Anionenextraktion wesentlich sensitiver gegenüber wechselnden experimentellen Bedingungen. Das hängt insbesondere mit den veränderten Bindungsverhältnissen in Anionenkomplexen zusammen. So wird die Extraktionsausbeute stark durch die Lipophilie der Liganden beeinflusst; ein signifikanter Anionentransport in die organische Phase wurde lediglich mit lipophilen Liganden erzielt. Die beobachtete Abstufung steigender Extraktion SO42- < Cl- < HCrO4- < I- ist in Übereinstimmung mit der zunehmenden Lipophilie dieser Anionen. In Abhängigkeit von der Natur der vorhandenen N-Donorfunktionen im Liganden und der Struktur der Liganden insgesamt wurde ein ausgeprägter pH-Einfluss auf die Extraktion der Anionen beobachtet. Während für die Liganden mit sekundären Aminfunktionen hohe Extrahierbarkeiten bei einem pH-Wert von ca. 5 auftraten, stiegen die Extraktionsausbeuten für Verbindungen mit tertiären Aminstickstofffunktionen mit abnehmenden pH-Wert kontinuierlich an. Die untersuchten Anionen wurden vorwiegend unter Bildung von 1:1- und 1:2-Komplexen (Anion : Ligand) in die organische Phase überführt. Für den Membrantransport war eine steigende Transportrate entsprechend der Dominanz der Lipophilie in der Reihe H2PO4- < SO42- < Cl- < Br- charakteristisch. Ein bevorzugter Transport von Cl- gegenüber Br- wurde hingegen mit sterisch anspruchsvollen Liganden sowie ausgeprägt lipophilen Verbindungen erreicht. Die Strukturen von zwei Anionenkomplexen mit BF4- bzw. Br- zeigen differenzierte Bindungsmuster. Einmal verhindern in einem Iminopodanden starke intramolekulare Wasserstoffbrücken zwischen dem protonierten Brückenstickstoff und den Iminfunktionen der Podandarme einen Einschluss des BF4--Anions in den vorliegenden Pseudokäfig, so dass die Koordination des Anions lediglich über schwache C-H···F-Kontakte an der Ligandperipherie erfolgt. Im Gegensatz dazu sind in einem N4-Aminliganden die drei Aminfunktionen der Podandarme protoniert. Die Br--Ionen werden sowohl durch ladungsunterstützte N-H···Br- als auch durch C-H···Br-Wasserstoffbrücken vom Liganden koordiniert. Weiterhin konnte in der Arbeit der Nachweis geführt werden, dass durch die Kombination von kationen- und anionenbindenden Funktionseinheiten in einem tripodalen Liganden die simultane Bindung und Extraktion von Kationen und Anionen möglich wird. Die Röntgenkristallstruktur eines Hg(ClO4)2-Komplexes bestätigt dabei die gleichzeitige Koordination von Kation und Anion durch die unterschiedlichen spezifischen Funktionseinheiten im Molekül.