京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20709号 / 工博第4406号 / 新制||工||1685(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 陰山 洋, 教授 作花 哲夫 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

Conversion material electrodes such as FeF2 possess the potential to deliver transformative improvements in lithium ion battery performance because they permit a reversible change of more than one Li-ion per 3d metal cation. They outperform current state of the art intercalation cathodes such as LiCoO2, which have volumetric and gravimetric energy densities that are intrinsically limited by single electron transfer. Current studies focus on composite electrodes that are formed by mixing with carbon (FeF2-C), wherein the carbon is expected to act as a binder to support the matrix and facilitate electronic conduction. These binders complicate the understanding of the electrode-electrolyte interface (SEI) passivation layer growth, of Li agglomeration, of ion and electron transport, and of the basic phase transformation processes under electrochemical cycling. This research uses thin-films as a model platform for obtaining basic understanding to the structural and chemical foundations of the phase conversion processes. Thin film cathodes are free of the binders used in nanocomposite structures and may potentially provide direct basic insight to the evolution of the SEI passivation layer, electron and ion transport, and the electrochemical behavior of true complex phases. The present work consisted of three main tasks (1) Development of optimized processes to deposit FeF2 and LiPON thin-films with the required phase purity and microstructure; (2) Understanding their electron and ion transport properties and; (3) Obtaining insight to the correlation between structure and capacity in thin-film microbatteries with FeF2 thin-film cathode and LiPON thin-film solid electrolyte. Optimized pulsed laser deposition (PLD) growth produced polycrystalline FeF2 films with excellent phase purity and P42/mnm crystallographic symmetry. A schematic band diagram was deduced using a combination of UPS, XPS and UV-Vis spectroscopies. Room temperature Hall measurements reveal that as-deposited FeF2 is n-type with an electron mobility of 0.33 cm2/V.s and a resistivity was 0.255 Ω.cm. The LiPON films were deposited by reactive sputtering in nitrogen, and the results indicate that the ionic conductivity is dependent on the amount of nitrogen incorporated into the film during processing. The highest ionic conductivity obtained was 1.431.9E-6 Scm-1 and corresponded to a chemical composition of Li1.9PO3.3N.21. FeF2/LiPON thin films microbatteries were assembled using a 2032 coin cell configuration and subjected to Galvanostatic cycling. HRTEM and EELS spectroscopy where performed across the FeF2/LiPON interface of samples cycled once 15 times in their lithiated and delithiated states to understand the relationship between microstructural evolution and capacity. The EELS measurements provided evidence of a three-phase conversion reaction over the first discharge described by FeF2 +2e-+2Li+↔Fe +LiF, and of incomplete reconversion back to FeF2 after the 1st cycle resulting in new Fe0 and LiF phases in delithiated samples. This incomplete conversion results in (a) a smaller phase fraction of FeF2 participating in the conversion process subsequently and (b) the formation of LiF which is resistive to both electron and ion transport. This results in the observed drastic drop in capacity after the1st cycle. More study to understand the reconversion reaction pathways is required to fully exploit the potential of FeF2 and other conversion materials as cathodes in Li ion batteries.

No description available.

In the early 1970s, research carried out on rechargeable lithium batteries at the Exxon Laboratories in the US established that lithium ions can be intercalated electrochemically into certain layered transition-metal sulphides, the most promising being titanium disulphide. Stemming from this discovery for titanium disulphide, there has been increased interest on lithium-ion intercalation compounds for application in rechargeable batteries. The first rechargeable lithium cell was commercialized in late 1980s by Moli Energy Corporation in Canada. The cell comprised a spirally wound lithium foil as the anode, a separator and MoS2 as the cathode. The cell had a nominal voltage of 1.8 V and an attractive value of specific energy, which was 2 to 3 times greater than either lead-acid or nickel-cadmium cells. However, the battery was withdrawn from the market after safety problems were experienced. This paved way for the discovery of lithium-ion battery. The origin of lithium-ion battery lies in the discovery that Li+-ions can be reversibly intercalated within or deintercalated from the van der Walls gap between graphene sheets of carbon materials at a potential close to the Li/Li+ electrode. Thus, lithium metal is replaced by carbon as the anode material for rechargeable lithium-ion batteries, and the problems associated with metallic lithium mitigated. Complimentary investigations on intercalation compounds based on transition metals resulted in establishing LiCoO2 and LiNiO2 as promising cathode materials. By employing aforesaid intercalation materials, namely carbon and LiCoO2 respectively, as negative and positive electrodes in a non-aqueous lithium-salt electrolyte, a Li-ion cell with a voltage value of about 3.5 V resulted. These findings led to a novel rechargeable battery technology. Lithium-ion batteries were first introduced commercially in 1991 by the Sony Corporation in Japan. Other Japanese manufacturers soon entered the market, followed closely by American and European companies. The subsequent growth in sales of the batteries was truly phenomenal. Beginning from 1991, the lithium-ion battery market has grown from an R&D interest to sales of over 400 million units in 1999. The global market value for lithium-ion batteries at original equipment manufacturer level was estimated to be $1.86 billion in 2000. By 2006, the market is expected to grow to over 1.2 billion units with value of over $4 billion, while the average unit price is expected to fall. Initially, realizable specific energy of commercial Li-ion battery was only about 120 Wh kg-1. However, with continuing improvements in various cell components, present day Li-ion batteries can provide a specific energy density of about 200 Wh kg-1. With the ‘holy grail’ far to be realized, the current R&D efforts are focussed on furthering the specific energy of lithium-ion batteries in conjunction with safety, environmental compatibility, and cost effectiveness. In the Li-ion cell, all of its electrochemical constituents, namely anode, cathode and electrolyte are central to its performance. This thesis describes some novel studies on cathode and anode materials for lithium-ion Batteries.

International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / The rapid growth in portable and wireless communication products has brought valuable advancements in battery technology. No longer is a battery restricted to a metal container in cylindrical or prismatic format. Today’s batteries (both primary and secondary) can be constructed in thin sheets and sealed in foil/plastic laminate packages. Along with improvements in energy density, temperature performance, and environmentally friendly materials, these batteries offer greater packaging options at a significantly lower development cost. Under the Hardened Subminiature Telemetry and Sensor System (HSTSS) program these battery technologies have been further developed for high-g telemetry applications. Both rechargeable solid state lithium-ion polymer and primary lithium manganese dioxide batteries are being developed in conjunction with Ultralife Batteries Inc. Prototypes of both chemistries have been successfully tested in a ballistic environment while providing high constant rates of discharge, which is essential to these types of applications. Electrical performance and environmental data are reported.

This thesis encompasses the successful synthesis, characterization (NMR, IR, TGA) and electrochemical testing of novel, potentially redox-active organic materials. These were destined as electrodes for Li-organic cells and/or as catalysts for Li–O2 cells. The electrochemical performance of the dilithiated and tetralithiated salts of 2,5-dialkylamide hydroquinones (with ethyl, isopropyl or benzyl as the alkyl group) and of a partially lithiated polymer with a backbone of alternating 2,5-dicarbonylhydroquinone and 1,4-benzyl diaminophenylene units was evaluated. The small organicsalts exhibited redox-activity around 1.0 V vs Li/Li+ (the terephthaloyl redox system) and 2.8 V vs Li/Li+ (the quinone redox system). These values drifted depending on lithiation degree and alkyl substituent. Redox irreversibility featured these materials which decomposed and dissolved. The polymer exhibited multiple redox-activity in the region of 2.5-3.6 V vs Li/Li+, which was however also irreversible. Further on, the small organic salts were tested as to their impact on the dischargeproduct (Li2O2) yield in Li-O2 cells. Discharge profiles of cells with and without the inclusion of the salts were contrasted to each other; the former having a jagged appearance, indicative of side-reactions. The O2 electrode was studied by XRD todetect the formed products and the amount of Li2O2 present was quantified throug htitration and UV-vis spectroscopy. Organic salt inclusion was found to negatively affect the Li2O2 formation and also attack the Li-electrode.

Thesis advisor: Dunwei Wang / When their electrodes are made of nanomaterials or materials with nanoscale features, devices for energy conversion and energy storage often exhibit new and improved properties. One of the main challenges in material science, however, is to synthesize these nanomaterials with designed functionality in a predictable way. This thesis presents our successes in synthesizing TiSi₂ nanostructures with various complexities using a chemical vapor deposition (CVD) method. Attention has been given to understanding the chemistry guiding the growth. The governing factor was found to be the surface energy differences between various crystal planes of orthorhombic TiSi₂ (C54 and C49). This understanding has allowed us to control the growth morphologies and to obtain one-dimensional (1D) nanowires, two-dimensional (2D) nanonets and three-dimensional (3D) complexes with rational designs by tuning the chemical reactions between precursors. Among all these morphologies, the 2D nanonet, which is micrometers wide and long but only approximately 15 nm thick, has attracted great interest because it is connected by simple nanostructures with single-crystalline junctions. It offers better mechanical strength and superior charge transport while preserving unique properties associated with the small-dimension nanostructure, which opens up the opportunity to use it for various energy related applications. In this thesis we focus on its applications in lithium ion batteries. With a unique heteronanostructure consisting of 2D TiSi₂ nanonets and active material coating, we demonstrate the performances of both anode and cathode of lithium ion batteries can be highly improved. For anode, Si nanoparticles are deposited as the coating and at a charge/discharge rate of 8400 mA/g, we measure specific capacities >1000 mAh/g with only an average of 0.1% decay per cycle over 100 cycles. For cathode, V₂O₅ is employed as an example. The TiSi₂/V₂O₅ nanostructures exhibit a specific capacityof 350 mAh/g, a power rate up to 14.5 kW/kg, and 78.7% capacity retention after 9800 cycles. In addition, TiSi₂ nanonet itself is found to be a good anode material due to the special layer-structure of C49 crystals. / Thesis (PhD) — Boston College, 2012. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

Thesis advisor: Dunwei Wang / The performance of advanced energy storage devices is intimately connected to the designs of electrodes. To enable significant developments in this research field, we need detailed information and knowledge about how the functions and performances of the electrodes depend on their chemical compositions, dimensions, morphologies, and surface properties. This thesis presents my successes in synthesizing and characterizing electrode materials for advanced electrochemical energy storage devices, with much attention given to understanding the operation and fading mechanism of battery electrodes, as well as methods to improve their performances and stabilities. This dissertation is presented within the framework of two energy storage technologies: lithium ion batteries and lithium oxygen batteries. The energy density of lithium ion batteries is determined by the density of electrode materials and their lithium storage capabilities. To improve the overall energy densities of lithium ion batteries, silicon has been proposed to replace lithium intercalation compounds in the battery anodes. However, with a ~400% volume expansion upon fully lithiation, silicon-based anodes face serious capacity degradation in battery operation. To overcome this challenge, heteronanostructure-based Si/TiSi2 were designed and synthesized as anode materials for lithium ion batteries with long cycling life. The performance and morphology relationship was also carefully studied through comparing one-dimensional and two-dimensional heteronanostructure-based silicon anodes. Lithium oxygen batteries, on the other hand, are devices based on lithium conversion chemistries and they offer higher energy densities compared to lithium ion batteries. However, existing carbon based electrodes in lithium oxygen batteries only allow for battery operation with limited capacity, poor stability and low round-trip efficiency. The degradation of electrolytes and carbon electrodes have been found to both contribute to the challenges. The understanding of the synergistic effect between electrolyte decomposition and electrode decomposition, nevertheless, is conspicuously lacking. To better understand the reaction chemistries in lithium oxygen batteries, I designed, synthesized, and studied heteronanostructure-based carbon-free inorganic electrodes, as well as carbon electrodes whose surfaces protected by metal oxide thin films. The new types of electrodes prove to be highly effective in minimizing parasitic reactions, reducing operation overpotentials and boosting battery lifetimes. The improved stability and well-defined electrode morphology also enabled detailed studies on the formation and decomposition of Li2O2. To summarize, this dissertation presented the synthesis and characterization of inorganic nanostructured materials for advanced energy storage. On a practical level, the new types of materials allow for the immediate advancement of the energy storage technology. On a fundamental level, it helped to better understand reaction chemistries and fading mechanisms of battery electrodes. / Thesis (PhD) — Boston College, 2015. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

Lithium-ion battery (LIB) is widely utilized in many modern applications as energy sources. Numerous efforts have been dedicated to increasing electrochemical performances, but improvement on battery safety remains a visible challenge. While new electrode materials have been developed, advancement in new separator for LIB has remained relatively slow. Separator is the polymeric porous material that physically separates electrodes and allows free flow of ions through its structure. It is electrochemically inactive but essential for avoiding thermal runaway conditions. Besides its crucial functions, separator has been known as the mechanically weakest component. Structural battery is a new approach that employs multifunctional material concept to use LIB as load-bearing material to minimize the weight of the complete system and maximize the efficiency. Separator materials are required to have good thermal stability, battery chemistry, and mechanical performance. This work aims at creating electrospun membranes with improved thermal resistance, structural integrity and moderate ionic conductivity as the next generation LIB separators. Electrospinning process is known as a versatile and straightforward technique to fabricate continuous fibers at nano- and micro- scales. The electrospinning process employs an electrostatic force to control the production of fibers from polymer solutions. Solution and process parameters, including type of polymer and solvent system, concentration of polymer solution, acceleration voltage, and solution feed rate, have been studied to achieve the desirable membrane properties. In this report, the electrospinning parameters affecting morphology and corresponding properties of electrospun membranes, electrospun polymer composite and polymer-metal oxide composite membranes for structural battery applications will be discussed.

Liu, Hao = 鋰離子電池納米電極的製備和表徵 / 劉昊. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2013. / Includes bibliographical references (leaves 99-103). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese. / Liu, Hao = Li li zi dian chi na mi dian ji de zhi bei he biao zheng / Liu Hao.