121 |
Earthquake resistant design of reinforced concrete wallsPilakoutas, Kypros January 1990 (has links)
No description available.
|
122 |
Rotation of principal stresses in sandSymes, M. J. P. R. January 1983 (has links)
No description available.
|
123 |
Piled foundations adjacent to surcharge loadsBransby, Mark Fraser January 1995 (has links)
No description available.
|
124 |
Frequency analysis of accelerometer measurements on trainsMajala, Jonas January 2017 (has links)
No description available.
|
125 |
Nonlinear elastic analysis of concrete beams based on the Smeared Crack ApproachBetancourt, N., Betancourt, N., Arias, C., Durán, F., Arana, V. 07 February 2020 (has links)
In the present study, an analysis of plain and reinforced concrete beams under monotonic loading was made based on the Fixed Smeared Crack approach. The objectives of this research were to analyze the nonlinear behavior of the selected cases of analysis and to propose an alternative and simple model for the analysis of beams under service loadings, by means of Committee 435 of the American Concrete Institute. A brittle model for concrete and a linear-elastic behavior for steel reinforcement bars were considered. Results are presented through force-displacement curves and the sequence of cracking propagation. Also, a comparison of calculated instantaneous deflections of simply supported beams was made between the proposed model and other researches. It was verified that the proposed algorithm can predict adequately the cracking process and the deflections of beams subjected to service loadings, taking into account experimental results from other authors.
|
126 |
An Optimization Technique Applied to the Determination of Orthotropic Material Properties Using Dynamic Response Test DataWebster, Ronald L. 01 August 1969 (has links)
A knowledge of the behavior of a material under loading similar to expected service loading is required before that material can be used effectively in the design process. Without sufficient mechanical properties data, the design process degenerates to a time consuming and often costly "build, test and modify" type of program. Obviously, this trial and error approach leaves much to be desired.
|
127 |
A Study of Osteocyte Apoptosis in Mechanically Loaded and Unloaded Murine TibiaeKessler, Josiah Elihu 01 May 2016 (has links) (PDF)
Previous research has provided evidence in support of apoptotic osteocytes playing a role in the bone remodeling process. In this study, we examined the regional and quadrantal variations of apoptotic and viable osteocytes in cyclically loaded and unloaded samples. Left tibias of C57 Black 6 Taconic mice (C57Bl/6) were cyclically loaded for either 2 weeks or 5 weeks, with the right tibias being used as controls. After loading, tibias were resected, processed, and then stained using either a TUNEL stain, to show apoptotic osteocytes, or a 2.0% methyl green solution, to reveal viable cells. Cross-sectional images from each tibia were then captured and analyzed in each region (distal, midshaft and proximal) and quadrant (cranial, lateral, caudal, and medial) by counting the number of osteocytes, both apoptotic and viable, and subsequently calculating the percentages and densities of those osteocytes. Individual analysis of each sample group showed that the 5 week loaded bones, with the most statistically significant p-values, had the most regional variations within the samples, specifically showing decreased apoptotic and viable osteocytes in the lateral quadrants. Comparative analysis revealed a statistically significant higher percentage and density of apoptotic osteocytes in 5 week loaded samples compared to all other samples. This provides further quantitative evidence in support of apoptotic osteocytes playing a role in bone remodeling.
|
128 |
NANO-MECHANICAL CHARACTERISTICS OF WEAR RESISTANT PVD COATINGS IN RELATION TO WEAR PERFORMANCE OF CUTTING TOOLS DURING HARD END MILLING OF H13 TOOL STEELKornberg, Anton Benjamin 06 1900 (has links)
Two families of PVD hard coatings were successfully used for high performance end milling of hardened H13 tool steel. The first family of coatings are AlCrN-based, they are used for wet machining and the other family is based on TiAlCrSiYN coating and are used for dry machining of H13. It was shown that there is a strong potential for further advancement in the wear performance of the coatings by improving the coating architecture as well as by varying the deposition parameters used during their synthesis. A number of deposition parameters of the coatings show a strong impact on wear performance of the cutting tools. Wear performance was related to the structure and a number of nano-mechanical characteristics of the coating layer assessed using the NanoTest system produced by Micro Materials. It was shown that critical characteristics like nano-hardness, loading support factor and nano-scaled scratch resistance can be used to predict the wear performance of a cutting tool. / Thesis / Master of Applied Science (MASc)
|
129 |
Manipulating Sucrose Proton Symporters to Understand Phloem LoadingDasgupta, Kasturi 08 1900 (has links)
Phloem vascular tissues transport sugars synthesized by photosynthesis in mature leaves by a process called phloem loading in source tissues and unloading in sink tissues. Phloem loading in source leaves is catalyzed by Suc/H+ symporters (SUTs) which are energized by proton motive force. In Arabidopsis the principal and perhaps exclusive SUT catalyzing phloem loading is AtSUC2. In mutant plants harboring a T-DNA insertion in each of the functional SUT-family members, only Atsuc2 mutants demonstrate overtly debilitated phloem transport. Analysis of a mutant allele (Atsuc2-4) of AtSUC2 with a T-DNA insertion in the second intron showed severely stunted phenotype similar to previously analyzed Atsuc2 null alleles. However unlike previous alleles Atsuc2-4 produced viable seeds. Analysis of phloem specific promoters showed that promoter expression was regulated by Suc concentration. Unlike AtSUC2p, heterologous promoter CoYMVp was not repressed under high Suc conc. Further analysis was conducted using CoYMVp to test the capacity of diverse clades in SUT-gene family for transferring Suc in planta in Atsuc2 - / - mutant background. AtSUC1 and ZmSUT1 from maize complemented Atsuc2 mutant plants to the highest level compared to all other transporters. Over-expression of the above SUTs in phloem showed enhanced Suc loading and transport, but against expectations, plants were stunted. The implications of SUT over-expression to enhance phloem transport and loading are discussed and how it induces a perception of phosphate imbalance is presented.
|
130 |
Sources of Atmospheric Dust Deposition on Utah LakeTelfer, Justin 10 March 2023 (has links)
Atmospheric deposition (AD) is a significant source of nutrient loading to waterbodies around the world. However, the sources and loading rates are poorly understood for major waterbodies and even less understood for local waterbodies. Utah Lake is a eutrophic lake located in central Utah, USA, and has high nutrient levels. Recent research has identified AD as significant sources for nutrient loading to the lake to better understand the dust AD sources, we sampled suspected source locations and collected deposition samples around the lake. We analyzed these samples using Inductively Coupled Plasma (ICP) for 25 metals to characterize their elemental fingerprints. We then compared the lake samples to the source samples to determine likely source locations. We computed spectral angle, coefficient of determination, multi-dimensional scaling, and radar-plots to characterize the similarity of the samples. We found that lake deposition samples were more similar to local sources than to distant sources. This suggests that the major source of atmospheric deposition onto Utah Lake is the local empty fields south and west of the lake and not the farther playa sources as previously suggested. Preliminary data suggest that dust AD is associated with dry, windy conditions and is episodic in nature. We show that AD from dust deposition is likely a small portion of the overall AD nutrient loading on Utah Lake, with the dry and precipitation source contributing the majority of the load.
|
Page generated in 0.0404 seconds