There have has been instances when a powerful neighboring countries are observed as being difficulty for the smaller ones. Moreover, the phenomena of subjugation roots back to imperialism era and its loitered notion of superiority is still practiced by most of the developed and sturdy countries. But the most vital thing here to be considered is the other nations’ (or smaller nations’) action against the dominance, which sometimes is demonstrated either in a resilient fashion or completely in submissive manner. In the era of globalization where nations’ relationship is intricate in a complex web of dependency, the nations with limited resources, weak diplomacy and instable politics are mostly compelled to succumb itself in front of relatively huge powers. And if the powerful states happens to be the immediate neighbors than the things might get more complex. In addition to this, the situation can be worse if the nation is a Least Developed Country (LDC hereafter) and also Land Locked States like Nepal and Bhutan. This research paper intends to analyze situation of such two nations, namely Nepal and Bhutan that are squeezed between China– a rising global power and India- an aspiring regional power. The interfering and controlling nature of these giants, at times, through diplomatic and coercive tactics has been evident in both the nation. But, despite the similarities these two small countries are seen to have adopted different strategies while dealing with their neighbors. If we look at Nepal we can see that it has developed bilateral relation with its both neighbors. And Bhutan has bilateral relation only with India and still has not welcomed China in its friendship zone, and this puzzle drives the research paper. The paper attempts to understand the situation from the lens of realism, as the theory implies that the nation is the nucleus and whatever action it undertakes is based on the advantage and mostly concerned in their individual power growth. It believes that any nation’s behavior does not involve the utopian notion but functions solely on the self-indulgence manner. Furthermore, the paper has tried to make an analysis with the help of inductive theory. The research finds that realism along is to sufficient to understand the small country’s perspective. There are many other factors that have contributed in making the strategic choices that these small countries have opted in order to establish a certain kind of relationship with their neighbors. Along with this the area of study needs to be broadened in order to comprehend the situation completely.

Thesis deals with design of phase locked loop, which will be used as frequency multiplier. Full integrated phase locked loop with current pump is presented.

The purpose of this thesis is to explore and examine how gameplay experiences differ in the gacha game Genshin Impact (miHoYo, 2020). In particular, there is a focus on the economic systems of the game along with the general play experience. People can have different perspectives as veteran players or newbie players, so the objective is to find differences in how these players approach the reward systems of the game, and how their relationship to these systems is affected. This is done by utilizing a mixed-method approach, using aspects of both formal analysis and autoethnography. It is further explored how players interacted with these economic systems, with a focus on the harder to acquire, premium currency of Primogems. The characteristics of reward systems in Genshin Impact, particularly the content unlocking mechanisms of the game, are discussed further, as they have implications for both types of players. The paper goes deeper into discussing dark design patterns, which are prevalent in the experiences of both players. As Genshin Impact is a large game with a variety of content, this is further explored and related to relevant theory to better facilitate a discussion about possible design implications. By comparing and analyzing the experiences of both players in regards to relevant theory, it was concluded that at a certain point the game no longer concerns itself with rewarding players adequately. This was further compounded by the game offering less and less goals to work towards for players, as they simply run out of meaningful content to do. Players are distracted from this lack of a goal by expertly crafted dark design patterns, introduced to the players in such a way that they have all but no choice, but to engage in these patterns willingly.

Brain-computer interfaces (BCIs) are very convenient tools to assess locked-in (LIS) and completely locked-in state (CLIS) patients' hidden states of consciousness. For the time being, there is no ground-truth data in respect to these states for above-mentioned patients. This lack of gold standard makes this problem particularly challenging. In addition to consciousness assessment, BCIs also provide them with a communication device that does not require the presence of motor responses, which they are lacking. Communication plays an important role in the patients' quality of life and prognosis. Significant progress have been made to provide them with EEG-based BCIs in particular. Nonetheless, the majority of existing studies directly dive into the communication part without assessing if the patient is even conscious. Additionally, the few studies that do essentially use evoked brain potentials, mostly the P300, that necessitates the patient's voluntary and active participation to be elicited. Patients are easily fatigued, and would consequently be less successful during the main communication task. Furthermore, when the consciousness states are determined using resting state data, only one or two features were used. In this thesis, different sets of EEG features are used to assess the consciousness level of CLIS patients using resting-state data. This is done as a preliminary step that needed to be succeeded in order to engage to the next step, communication with the patient. In other words, the 'conversation' is initiated only if the patient is sufficiently conscious. This variety of EEG features is utilised to increase the probability of correctly estimating the patients' consciousness states. Indeed, each of them captures a particular signal attribute, and combining them would allow the collection of different hidden characteristics that could have not been obtained from a single feature. Furthermore, the proposed method should allow to determine if communication shall be initiated at a specific time with the patient. The EEG features used are frequency-based, complexity related and connectivity metrics. Besides, instead of analysing results from individual channels or specific brain regions, the global activity of the brain is assessed. The estimated consciousness levels are then obtained by applying two different soft-clustering analysis methods, namely Fuzzy c-means (FCM) and Gaussian Mixture Models (GMM), to the individual features and ensembling their results using their average or their product. The proposed approach is first applied to EEG data recorded from patients with unresponsive wakefulness syndrome (UWS) and minimally conscious state (MCS) (patients with disorders of consciousness (DoC)) to evaluate its performance. It is subsequently applied to data from one CLIS patient that is unique in its kind because it contains a time frame during which the experimenters affirmed that he was conscious. Finally, it is used to estimate the levels of consciousness of nine other CLIS patients. The obtained results revealed that the presented approach was able to take into account the variations of the different features and deduce a unique output taking into consideration the individual features contributions. Some of them performed better than others, which is not surprising since each person is different. It was also able to draw very accurate estimations of the level of consciousness under specific conditions. The approach presented in this thesis provides an additional tool for diagnosis to the medical staff. Furthermore, when implemented online, it would enable to determine the optimal time to engage in communication with CLIS patients. Moreover, it could possibly be used to predict patients' cognitive decline and/or death.

Le développement technologique dans le domaine des télécommunications, ainsi que des systèmes de détection, a accru ces dernières années la nécessité de signaux de référence présentant une très haute pureté spectrale. L'augmentation des débits, la saturation des bandes de fréquence ainsi que les performances imposées pour la détection radar ont ouvert la voie à la génération micro-onde par l'optique. Ces références de fréquence sont souvent issues d'oscillateurs optoélectroniques (OEO). Ces oscillateurs intègrent un élément de stockage de l'énergie au travers de résonateurs ou de longues lignes à retard fibrées afin d'augmenter leur facteur qualité et permettant ainsi d'atteindre des performances supérieures aux signaux multipliés à partir de sources basses fréquences ou directement à partir d'oscillateurs micro-ondes à résonateur diélectrique (DRO). Une topologie originale d'oscillateurs optoélectroniques a été proposée à la fin des années 1990 par une équipe américaine : il s'agit de remplacer le résonateur passif nécessitant un verrouillage du laser sur ce dernier par un résonateur actif, intégrant un amplificateur optique. Ce résonateur actif, un laser à blocage de modes, permet un couplage entre l'oscillation optique du laser et l'oscillation optoélectronique. On parle alors d'oscillateur optoélectronique couplé (COEO). Les performances du COEO sont étroitement liées à la pureté spectrale du signal issu du laser à blocage de modes. Ce travail de thèse traite de l'étude et de l'optimisation de ces systèmes. Une étude approfondie sur le bruit dans les amplificateurs optiques a tout d'abord été menée afin de déterminer quel type d'amplificateur choisir pour le COEO et sous quelles conditions l'amplification optique apporte un bruit de phase minimal. Ensuite, un COEO à 10 GHz a été réalisé, présentant un très faible bruit de phase atteignant - 132 dBc/Hz à 10 kHz de la porteuse. Un modèle a par ailleurs été implémenté, permettant de déterminer a posteriori l'efficacité du couplage et ainsi la bande de verrouillage entre l'oscillation optoélectronique et le laser à blocage de modes. Ce couplage interne dépend fortement de la dynamique du système. Cependant, les différents effets non linéaires qui ont lieu dans l'amplificateur à semiconducteur et les fibres ne permettent pas d'obtenir un modèle analytique. Un modèle itératif a alors été proposé afin d'obtenir les propriétés de l'enveloppe complexe lentement variable du peigne de fréquence généré en sortie du laser dont la photodétection conduit à la puissance RF générée par le COEO. Le COEO génère un peigne de fréquence suffisamment large pour produire des harmoniques RF supérieurs à la fréquence de répétition du laser à blocage de modes, si les modes longitudinaux espacés de plusieurs intervalles spectraux libres (ISL) sont en phase. Le modèle itératif développé permet, à partir des paramètres expérimentaux de déterminer le spectre optique ainsi que la distribution de phase à l'intérieur de celui-ci. Il est possible alors d'augmenter la puissance d'une harmonique en sortie de la photodiode par un ajout d'éléments dispersifs. Cette multiplication de fréquence permet la génération de signaux à haute pureté spectrale en bande millimétrique. Une démonstration expérimentale à 90 GHz a été proposée, basée sur un COEO fonctionnant à 30 GHz. Ces résultats sont prometteurs et une intégration du COEO dans un boîtier thermalisé ainsi qu'une gestion plus fine de la dispersion des fibres peut permettre des améliorations significatives sur le bruit de phase du système. / The important rise of telecommunication systems in the past decades, together with the sensitivity improvement of radar systems, has increased the necessity for high spectral purity frequency references at high frequencies. The saturation of classical microwave bandwidths motivated the search of frequency references at higher frequencies, such as K-band. Frequency multiplication from highly stable sources, such as quartz sources, is limited by the increase of the noise floor, which is often prohibitive at millimeter wave frequencies. On the contrary, microwave generation using optics becomes a very efficient technique in this frequency range. Indeed, passive optical resonators or delay lines feature a high Q factor which can be used to stabilize the microwave frequency. The best phase noise performance is today obtained with long delay line oscillators. However, a spurious mode suppression technique has to be implemented in this type of OEOs. The use of an active optical resonator is a third solution, which avoids any locking technique between the laser and the passive resonator. The first architecture of this type has been proposed at the end of the 1990's. In such a system, a mode-locked laser is coupled to a microwave oscillator (COEO). COEO phase noise performances are strongly dependent on the spectral purity of the mode locked laser signal. This thesis work focus on the study and the optimization of this system. Optical amplifiers noise is firstly investigated, in order to determine the optimal conditions to minimize their phase noise contribution to the COEO. A 10 GHz SOA based COEO has been realized and features a low phase noise level reaching - 132 dBc/Hz at 10 kHz from the carrier. An analytical model has also been developed to obtain the locking range of the coupled oscillations. This frequency range is strongly dependent on the coupling efficiency between optical oscillation and the optoelectronic oscillation. This parameter cannot be calculated analytically and an iterative model has been proposed to determine the amplitude and phase of the optical spectrum. Therefore, one can calculate the RF power on the photodiode, on which the coupling efficiency is depending. Since COEO features a large optical frequency comb where each tooth of the comb is phase locked thanks to the mode locked laser, harmonic generation from COEO is possible. Wide frequency comb from high frequency COEO allow millimeter wave generation. The iterative model developed in this work enable to determine the RF power of one specified harmonic from experimental parameters. Harmonic selection can also be performed through the management of the chromatic dispersion. Such frequency multiplication has been implemented to generate a high purity 90 GHz signal from a 30 GHz COEO.These results are promising and an integration of the system in a thermalized box is under process.

京都大学 / 0048 / 新制・課程博士 / 博士(情報学) / 甲第18413号 / 情博第528号 / 新制||情||93(附属図書館) / 31271 / 京都大学大学院情報学研究科通信情報システム専攻 / (主査)教授 小野寺 秀俊, 教授 守倉 正博, 教授 佐藤 高史 / 学位規則第4条第1項該当 / Doctor of Informatics / Kyoto University / DFAM

No description available.

No description available.

Phase Synthesis is a fundamental operation in Smart Antennas and other Phased Array systems based on beamforming. There are increasing commercial applications for Integrated Phased Arrays due to their low cost, size and power and also because the RF and digital signal processing can be performed on the same chip. These low cost beamforming applications have augmented interest in Coupled Phase Locked Loop (CPLL) systems for Phase Synthesis. Previous work on the implementation of Phase Synthesis systems using Coupled PLLs for low cost beamforming had the constraint of a limited phase range of ±90°. The idea behind the thesis is that this phase synthesis range can be increased to ±180° through the use of PLLs employing Phase Frequency Detectors(PFDs), which is a significant improvement over conventional coupled-PLL systems. This work presents the detailed design and measurement results for a phase synthesizer using Coupled PLLs for achieving phase shift in the range of ±180°. Several Coupled PLL architectures are investigated and their advantages and limitations are evaluated in terms of frequency controllability, phase difference synthesis control and phase noise of the systems. A two-PLL system implementation using off the shelf components is presented, which generates a steady-state phase difference in the range ±180° using an adjustable DC control current. This is the proof of concept for doing an IC design for a Coupled Phase Locked Loop system. Commercial applications in the Wireless Medical Telemetry Service (WMTS) band motivate the design of a CPLL system in the 608-614 MHz band. The design methodology is presented which shows the flowchart of the IC design process from the system design specifications to the transistor level design. MATLAB simulations are presented to model the system performance quickly. VerilogA modeling of the CPLL system is performed followed by the IC design of the system and each block is simulated under different process and temperature corners. The transistor level design is then evaluated for its performance in terms of phase difference synthesis and phase noise and compared with the initial MATLAB analysis and improved iteratively. The CPLL system is implemented in IBM 130nm CMOS process and consumes 40mW of power from a 1.2V supply with a phase noise performance of -88 dBc/Hz for 177° phase generation.

The geomorphology at Adršpach-Teplice, Czech Republic is dominated by vertical-walled, fracture-controlled features including slot canyons, gorges and pillars. Surfaces of canyon walls in Adršpach are case-hardened and more resistant to erosion than the bulk of the sandstone, which appears to be fundamental to the formation and preservation of canyons. Core and whole rock samples from Adršpach-Teplice were analyzed in thin section, including SEM analysis with cathodo luminescence. XRF and XRD analyses indicated that silica case-hardened surfaces are chemically and mineralogically similar to the rock interior, while iron case-hardened surfaces have an increase in iron present at the surface as the mineral goethite. Permeability analysis indicates a decrease in porosity in case-hardened surfaces. The rock at Adršpach-Teplice is poorly cemented yet has the strength to maintain vertical faces because of a locked sand structure, which was formed by pressure solution. Fracture faces contain disaggregation and cataclastic bands that reduce porosity and increase strength. Case-hardening exists on fracture faces and other surfaces as either silica or iron. Silica case-hardening is ubiquitous in the area and consists of a slight increase in abundance of silica overgrowths and sometimes an increase in clay content. It can form on fresh surfaces in as little as five years, creating what is essentially a self-repairing material. Iron case-hardening is composed of goethite, is much less prevalent than silica case-hardening, and does not appear to be actively depositing. Lichens, fungi, and other biological material are present on case-hardened surfaces and may add to the strength of the material. The internal structure of the rock lends the strength to form and maintain the features seen at Adršpach-Teplice, while case-hardening helps to protect them from erosion.