A detailed analysis and design of a navigation algorithm for a spacecraft to achieve precision lunar descent and landing is presented. The Inertial Navigation System (INS) was employed as the primary navigation system. To increase the accuracy and precision of the navigation system, the INS was integrated with aiding sensors - a star camera, an altimeter and a terrain camera. An unscented Kalman filter was developed to integrate the aiding sensor measurements with the INS measurements, and to estimate the current position, velocity and attitude of the spacecraft. The errors associated with the accelerometer and gyro measurements are also estimated as part of the navigation filter. An STK scenario was utilized to simulate the truth data for the navigation system. The navigation filter developed was tested and simulated, and from the results obtained, the position, velocity and attitude of the spacecraft were observed to be well estimated.

A linear covariance analysis is conducted to assess closed-loop guidance, navigation, and control system (GN&C) performance of the Altair vehicle during lunar powered descent. Guidance algorithms designed for lunar landing are presented and incorporated into the closed-loop covariance equations. Navigation-based event triggering is also included in the covariance formulation to trigger maneuvers and control dispersions. Several navigation and guidance trade studies are presented demonstrating the influence of triggering and guidance and study parameters on the vehicle GN&C performance.

No description available.

Two flash lidars, integrated from a number of cutting-edge components from industry and NASA, are lab characterized and flight tested under the Autonomous Landing and Hazard Avoidance (ALHAT) project (in its fourth development and field test cycle) which is seeking to develop a guidance, navigation, and control (GNC) and sensing system based on lidar technology capable of enabling safe, precise human-crewed or robotic landings in challenging terrain on planetary bodies under any ambient lighting conditions. The flash lidars incorporate pioneering 3-D imaging cameras based on Indium-Gallium-Arsenide Avalanche Photo Diode (InGaAs APD) and novel micro-electronic technology for a 128 x 128 pixel array operating at 30 Hz, high pulse-energy 1.06 ?m Nd:YAG lasers, and high performance transmitter and receiver fixed and zoom optics. The two flash lidars are characterized on the NASA-Langley Research Center (LaRC) Sensor Test Range, integrated with other portions of the ALHAT GNC system from around the country into an instrument pod at NASA-JPL, integrated onto an Erickson Aircrane Helicopter at NASA-Dryden, and flight tested at the Edwards AFB Rogers dry lakebed over a field of human-made geometric hazards. Results show that the maximum operational range goal of 1000m is met and exceeded up to a value of 1200m, that the range precision goal of 8 cm is marginally met, and that the transmitter zoom optics divergence needs to be extended another eight degrees to meet the zoom goal 6° to 24°. Several hazards are imaged at medium ranges to provide three-dimensional Digital Elevation Map (DEM) information. / Master of Science

Dans cette thèse, nous nous intéressons au problème de l’atterrissage lunaire autonome et nous proposons une méthode innovante amenant une alternative à l’utilisation de capteurs classiques qui peuvent se révéler encombrants, énergivores et très onéreux.La première partie est consacrée au développement et à la construction de capteurs de mouvement inspirés de la vision des insectes volants et mesurant le flux optique.Le flux optique correspond à la vitesse angulaire relative de l’environnement mesurée par la rétine d’un agent. Dans un environnement fixe, les mouvements d’un robot génèrent un flux optique contenant des informations essentielles sur le mouvement de ce dernier. En utilisant le principe du « temps de passage », nous présentons les résultats expérimentaux obtenus en extérieur avec deux versions de ces capteurs.Premièrement, un capteur mesurant le flux optique dans les deux directions opposées est développé et testé en laboratoire. Deuxièmement un capteur adapté à la mesure des faibles flux optiques similaires à ceux pouvant être mesurés lors d’un alunissage est développé, caractérisé et enfin testé sur un drone hélicoptère en conditions extérieures.Dans la seconde partie, une méthode permettant de réaliser le guidage, la navigation et la commande (GNC pour Guidance Navigation and Control) du système est proposée. L’innovation réside dans le fait que l’atterrissage en douceur est uniquement assuré par les capteurs de flux optique. L’utilisation des capteurs inertiels est réduite au maximum. Plusieurs capteurs orientés dans différentes directions de visée, et fixés à la structure de l’atterrisseur permettent d’atteindre les conditions finales définies par les partenaires industriels. Les nombreuses informations décrivant la position et l’attitude du système contenues dans le flux optique sont exploitées grâce aux algorithmes de navigation qui permettent d’estimer les flux optiques ventraux et d’expansion ainsi que le tangage.Nous avons également montré qu’il est possible de contrôler l’atterrisseur planétaire en faisant suivre aux flux optiques estimés une consigne optimale au sens de la consommation d’énergie. Les simulations réalisées durant la thèse ont permis de valider le fonctionnement et le potentiel de la solution GNC proposée en intégrant le code du capteur ainsi que des images simulées du sol de la lune. / In this PhD thesis, the challenge of autonomous lunar landing was addressed and an innovative method was developed, which provides an alternative to the classical sensor suites based on RADAR, LIDAR and cameras, which tend to be bulky, energy consuming and expensive. The first part is devoted to the development of a sensor inspired by the fly’s visual sensitivity to optic flow (OF). The OF is an index giving the relative angular velocity of the environment sensed by the retina of a moving insect or robot. In a fixed environment (where there is no external motion), the self-motion of an airborne vehicle generates an OF containing information about its own velocity and attitude and the distance to obstacles. Based on the “Time of Travel” principle we present the results obtained for two versions of 5 LMSs based optic flow sensors. The first one is able to measure accurately the OF in two opposite directions. It was tested in the laboratory and gave satisfying results. The second optic flow sensor operates at low velocities such as those liable to occur during lunar landing was developed. After developing these sensors, their performances were characterized both indoors and outdoors, and lastly, they were tested onboard an 80-kg helicopter flying in an outdoor environment. The Guidance Navigation and Control (GNC) system was designed in the second part on the basis of several algorithms, using various tools such as optimal control, nonlinear control design and observation theory. This is a particularly innovative approach, since it makes it possible to perform soft landing on the basis of OF measurements and as less as possible on inertial sensors. The final constraints imposed by our industrial partners were met by mounting several non-gimbaled sensors oriented in different gaze directions on the lander’s structure. Information about the lander’s self-motion present in the OF measurements is extracted by navigation algorithms, which yield estimates of the ventral OF, expansion OF and pitch angle. It was also established that it is possible to bring the planetary lander gently to the ground by tracking a pre-computed optimal reference trajectory in terms of the lowest possible fuel consumption. Software-in-the-loop simulations were carried out in order to assess the potential of the proposed GNC approach by testing its performances. In these simulations, the sensor firmware was taken into account and virtual images of the lunar surface were used in order to improve the realism of the simulated landings.