Thesis. 1975. Ph.D.--Massachusetts Institute of Technology. Dept. of Earth and Planetary Sciences. / Vita. / Bibliography: leaves 289-308. / by Frank E. Huggins. / Ph.D.

京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第18067号 / 理博第3945号 / 新制||理||1568(附属図書館) / 30925 / 京都大学大学院理学研究科物理学・宇宙物理学専攻 / (主査)教授 瀬戸 誠, 教授 鶴 剛, 教授 大久保 嘉高 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

Realizamos medidas Mossbauer a temperatura ambiente das ligas de SM IND.2 (CO IND.1-XFE IND.X) ind.17, COM X = 0.1 A 0.6, E DAS LIGAS sm (CO IND.0.90-VFE IND.VCU IND.0.08ZR IND.0.02) ind.8.35, Com V variando de 0.23 A 0.27. Estas amostras foram caracterizadas por difração de raio X. elas apresentaram a estrutura romboédrica do tipo th ind.2zn ind.17 (R3barraM) com os átomos de Fe ocupando quatro sítios cristalográficos distintos todos os espectros obtidos apresentaram desdobramento magnético e um nível de complexidade alto, resultado da sobreposição de quatro sítios distintos de átomos de fe. Os espectros foram ajustados e através desse ajuste determinados os parâmetros hiperfinos associados a cada sítio e suas respectivas populações. Os resultados obtidos das populações dos sítios nas series de compostos Sm ind.2 (CO IND.1-XFE IND.X) ind.17 revelaram a forte preferência dos átomos de FE de ocupar os sítios halteres (2c). No modelo proposto por ray, à função do ZR e o de deslocar pares de FE dos sítios halteres, substituindo-os por pares ZR-vacância. Através dos resultados obtidos pudemos também comprovar esta hipótese através da análise das populações dos sítios das duas series de amostras. / Mössbauer measurements were carried out at room temperature for Sm2(Co1-xFex)17 alloys with x=0,1 to 0,6 and Sm2(Co0.9-vFevCu0.08Zr0.02)8.35, with v=0.23 to 0.27. All samples were characterized by X-ray diffraction. They showed rhombohedral structure of th2Zn17 type (R3m), where Fe atoms occupy four crystallographic sites. All spectra showed magnetic splitting and a high complexity resulting from the superposition of four Fe sites. Hyperfine parameters and site populations were obtained by least-squares fitting of the spectra. For Sm2(Co1-xFex)17 alloys, Fe atoms show a strong preference for 2c (dumbbell) sites. In the Zr-containing alloys, on the other hand, this tendency is significantly reduced, confirming A. E. Rays hypothesis on the role of Zr in the improvement of the magnetic properties of these alloys through metallurgical treatments.

Realizamos medidas Mossbauer a temperatura ambiente das ligas de SM IND.2 (CO IND.1-XFE IND.X) ind.17, COM X = 0.1 A 0.6, E DAS LIGAS sm (CO IND.0.90-VFE IND.VCU IND.0.08ZR IND.0.02) ind.8.35, Com V variando de 0.23 A 0.27. Estas amostras foram caracterizadas por difração de raio X. elas apresentaram a estrutura romboédrica do tipo th ind.2zn ind.17 (R3barraM) com os átomos de Fe ocupando quatro sítios cristalográficos distintos todos os espectros obtidos apresentaram desdobramento magnético e um nível de complexidade alto, resultado da sobreposição de quatro sítios distintos de átomos de fe. Os espectros foram ajustados e através desse ajuste determinados os parâmetros hiperfinos associados a cada sítio e suas respectivas populações. Os resultados obtidos das populações dos sítios nas series de compostos Sm ind.2 (CO IND.1-XFE IND.X) ind.17 revelaram a forte preferência dos átomos de FE de ocupar os sítios halteres (2c). No modelo proposto por ray, à função do ZR e o de deslocar pares de FE dos sítios halteres, substituindo-os por pares ZR-vacância. Através dos resultados obtidos pudemos também comprovar esta hipótese através da análise das populações dos sítios das duas series de amostras. / Mössbauer measurements were carried out at room temperature for Sm2(Co1-xFex)17 alloys with x=0,1 to 0,6 and Sm2(Co0.9-vFevCu0.08Zr0.02)8.35, with v=0.23 to 0.27. All samples were characterized by X-ray diffraction. They showed rhombohedral structure of th2Zn17 type (R3m), where Fe atoms occupy four crystallographic sites. All spectra showed magnetic splitting and a high complexity resulting from the superposition of four Fe sites. Hyperfine parameters and site populations were obtained by least-squares fitting of the spectra. For Sm2(Co1-xFex)17 alloys, Fe atoms show a strong preference for 2c (dumbbell) sites. In the Zr-containing alloys, on the other hand, this tendency is significantly reduced, confirming A. E. Rays hypothesis on the role of Zr in the improvement of the magnetic properties of these alloys through metallurgical treatments.

<p>The applications of magnetic materials are related to their magnetic and crystal structure as well as electronic properties. In this thesis, mainly experimental methods have been focussed on novel materials and bulk materials. A selection of materials were studied by several techniques like Mössbauer spectroscopy, X-ray and neutron diffraction and magnetisation measurements.</p><p>New technology allow us to prepare artificial materials with unic magnetic properties. Magnetic multilayers are very interesting not only from phenomenological point of view but also as good applications materials. In this work will be shown some results from Fe/V and Fe/Co multilayer system</p><p>The (Fe_1-xMn_x)₃P system has been studied at both ends of the composition range. At the Fe-rich end, compounds exhibiting ferromagnetic ordering are formed, while at the Mn-rich end, an antiferromagnetic coupling was discovered. The experimental results are supported by theoretical calculations.</p><p>Rare-earth compounds with focus on Fe_0.65Er_0.2B_0.15 were studied by means of traditional Mössbauer spectroscopy, Monochromatic Circular Polarized Mössbauer Spectroscopy, X-ray diffraction and magnetic mesurements. This compound shows interesting behaviour of Fe magnetic moment at low and room temperature.</p><p>The first magnetic studies on rhombohedral Li₃Fe₂(PO₄)₃ at low temperature has also been made and an antiferromagnetic structure was revealed.</p>

Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2009.

The applications of magnetic materials are related to their magnetic and crystal structure as well as electronic properties. In this thesis, mainly experimental methods have been focussed on novel materials and bulk materials. A selection of materials were studied by several techniques like Mössbauer spectroscopy, X-ray and neutron diffraction and magnetisation measurements. New technology allow us to prepare artificial materials with unic magnetic properties. Magnetic multilayers are very interesting not only from phenomenological point of view but also as good applications materials. In this work will be shown some results from Fe/V and Fe/Co multilayer system The (Fe1-xMnx)3P system has been studied at both ends of the composition range. At the Fe-rich end, compounds exhibiting ferromagnetic ordering are formed, while at the Mn-rich end, an antiferromagnetic coupling was discovered. The experimental results are supported by theoretical calculations. Rare-earth compounds with focus on Fe0.65Er0.2B0.15 were studied by means of traditional Mössbauer spectroscopy, Monochromatic Circular Polarized Mössbauer Spectroscopy, X-ray diffraction and magnetic mesurements. This compound shows interesting behaviour of Fe magnetic moment at low and room temperature. The first magnetic studies on rhombohedral Li3Fe2(PO4)3 at low temperature has also been made and an antiferromagnetic structure was revealed.

A new type Rayleigh scattering of Mössbauer radiation (RSMR) spectrometer was developed, which due to favorable time scale of scattering process is suitable for the studies of complicated dynamics of biomolecules (not containing mössbauer nucleus) Densely packed iron nanowire arrays were created using template method of aluminum anodic oxide (AAO). Pore size and density of AAO template can be easily controlled by adjusting anodizing conditions. Shape and diameter of nanowires appear to be exact replicas of AAO pores. the effectiveness of different aqueous electrolytes used in nanowire deposition was investigated. Growth rate in different electrolytes was determined to be 52±2 nm/min. and 11,8±0,6 nm/min. This study has demonstrated the effects of aging of iron nanowires embedded within the pores of the AAO template. the influence of annealing parameters on the chemical composition of iron nanowires was investigated. CEMS studies have revealed. / Panaudojus puslaidininkinį γ-kvantų detektorių sukurtas naujo tipo Mesbauerio spinduliuotės Relėjaus sklaidos spektrometras, kuris dėl tinkamo γ-kvantų sklaidos laiko gali būti taikomas konformacinių judesių biologiniuose objektuose ir polimeruose, neturinčiuose mesbauerinių branduolių, tyrimams. Paruošti geležies nanosiūlų kolonijos, esančias aliuminio anodinio oksido (AAO) matricoje. Parenkant anodavimo sąlygas galima kontroliuoti, susidariusio tvarkingo porėto AAO, porų dydį ir tankį. Pagamintos AAO matricos užpildytos geležimi, taip susiformuoja žinomo dydžio nanosiūlai, kurių diametras atitinka porų diametrą. Palygintas vandeninių elektrolitų, skirtų užpildyti AAO poras, efektyvumas. Augimo greitis skirtinguose elektrolituose yra 52 ± 2 nm/min. ir 11,8 ± 0,6 nm/min. Nustatyti geležies nanosiūlų cheminės sudėties pokyčiai susidarymo ir senėjimo metu. Eksperimentiniais tyrimais įrodyta, kad geležies nanosiūlai AAO matricoje oksiduojasi ne visu tūriu, bet nuo atvirojo galo. Pakaitinus (daugiau nei 200 °C) metalinius nanosiūlus įkalintus AAO matricose, šie reaguoja su anodinio aliuminio oksidu ir sudaro špinelines struktūras.

Coal, as energy resource, possesses numerous characteristics and properties which all have an influence on its gasification behaviour. The two properties considered critically important when evaluating a coal source for gasification are its mineral content and slagging behaviour. Research has indicated that slag formation can be inhibited or even prevented by the addition of a fluxing agent. It is thus of great importance to understand the mineral interaction during gasification, in order to select a suitable fluxing agent for the prevention of slagging and clinker formation in the gasifier. The aim of this dissertation is to evaluate the slagging properties of a coal source with the addition of iron as a fluxing agent and to study the transformation of the mineral and added iron during gasification. A pre-determined amount of elemental iron (between 2 and 20 percentage by mass) was added to three different coal samples obtained from Sasol's operations in South Africa. The transformation of the iron in conjunction with the possible iron-containing minerals present in the coal was studied by means of Mossbauer spectroscopy. Typical characterisation analyses were also carried out on the original coal samples. The ash fusion temperature analyses (AFT) were used to study the slagging behaviour of the iron-spiked coal samples. Even though AFT analyses only provide an average flow property, it gives a good indication of the changes that the iron addition induces in coal properties. FactSage modelling was carried out in conjunction with the Mossbauer and AFT analyses. The AFT analysis on all of the samples indicated that the iron addition led to a 20% decrease in the AFT of all three the coal samples. The decrease observed, can be attributed to three main reasons: Formation of lower melting iron-containing phases, bridging of oxygen bonds by FeO and Fe203and the lowering of the viscosity by the iron-oxides, mainly hematite. Mossbauer spectra of the three original coal samples indicated that pyrite was the only iron-bearing mineral present / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2009.

Coal, as energy resource, possesses numerous characteristics and properties which all have an influence on its gasification behaviour. The two properties considered critically important when evaluating a coal source for gasification are its mineral content and slagging behaviour. Research has indicated that slag formation can be inhibited or even prevented by the addition of a fluxing agent. It is thus of great importance to understand the mineral interaction during gasification, in order to select a suitable fluxing agent for the prevention of slagging and clinker formation in the gasifier. The aim of this dissertation is to evaluate the slagging properties of a coal source with the addition of iron as a fluxing agent and to study the transformation of the mineral and added iron during gasification. A pre-determined amount of elemental iron (between 2 and 20 percentage by mass) was added to three different coal samples obtained from Sasol's operations in South Africa. The transformation of the iron in conjunction with the possible iron-containing minerals present in the coal was studied by means of Mossbauer spectroscopy. Typical characterisation analyses were also carried out on the original coal samples. The ash fusion temperature analyses (AFT) were used to study the slagging behaviour of the iron-spiked coal samples. Even though AFT analyses only provide an average flow property, it gives a good indication of the changes that the iron addition induces in coal properties. FactSage modelling was carried out in conjunction with the Mossbauer and AFT analyses. The AFT analysis on all of the samples indicated that the iron addition led to a 20% decrease in the AFT of all three the coal samples. The decrease observed, can be attributed to three main reasons: Formation of lower melting iron-containing phases, bridging of oxygen bonds by FeO and Fe203and the lowering of the viscosity by the iron-oxides, mainly hematite. Mossbauer spectra of the three original coal samples indicated that pyrite was the only iron-bearing mineral present / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2009.