The high-frequency properties of coupled magnetic systems have been investigated using vector network analyzer ferromagnetic resonance (VNA-FMR) spectroscopy. SAF structures consist of two ferromagnetic layers separated by a non-magnetic spacer, coupled through the indirect exchange interaction. The ferromagnetic layers of our samples were composed of FeCoB separated by a layer of Ru. The thickness of Ru was varied in the range of 8 to 18 Å among the samples studied. Antiferromagnetic coupling can be quickly identified by the major hysteresis loop (MHL). A new way of displaying FMR data for these trilayer samples is presented which completely preserves the anisotropy effects while fully characterizing the angular dependence of FMR. The advantage of our representation is that the high-frequency data can be easily compared to the static switching behavior at any angle obtained through susceptibility measurements. Ferromagnetic resonance; Coupled; Synthetic antiferromagnet; Magnetization switching

Understanding magnetization reversal is very important in designing high density and high data transfer rate recording media. This research has been motivated by interest in developing new nonvolatile data storage solutions as magnetic random access memories - MRAMs. This dissertation is intended to provide a theoretical analysis of static and dynamic magnetization switching of magnetic systems within the framework of critical curve (CC). Based on the time scale involved, a quasi-static or dynamic CC approach is used. The static magnetization switching can be elegantly described using the concept of critical curves. The critical curves of simple uncoupled films used in MRAM are discussed. We propose a new sensitive method for CC determination of 2D magnetic systems. This method is validated experimentally by measuring experimental critical curves of a series of Co/SiO2 multilayers systems. The dynamics switching is studied using the Landau-Lifshitz-Gilbert (LLG) equation of motion. The switching diagram so-called dynamic critical curve of Stonerlike particles subject to short magnetic field pulses is presented, giving useful information for optimizing field pulse parameters in order to make ultrafast and stable switching possible. For the first time, the dynamic critical curves (dCCs) for synthetic antiferromagnet (SAF) structures are introduced in this work. Comparing with CC, which are currently used for studying the switching in toggle MRAM, dCCs show the consistent switching and bring more useful information on the speed of magnetization reversal. Based on dCCs, better understanding of the switching diagram of toggle MRAM following toggle writing scheme can be achieved. The dynamic switching triggered by spin torque transfer in spin-torque MRAM cell has been also derived in this dissertation. We have studied the magnetization's dynamics properties as a function of applied current pulse amplitude, shape, and also as a function of the Gilbert damping constant. The great important result has been obtained is that, the boundary between switching/non-switching regions is not smooth but having a seashell spiral fringes. The influence of thermal fluctuation on the switching behavior is also discussed in this work.

Les mémoires non-volatiles magnétiques à effet de couple de transfert de spin - STT-MRAM sont un nouveau type de mémoire pouvant remplacer les mémoires DRAM ou SRAM. Chaque point de mémoire STT-MRAM est une jonction tunnel magnétique sous forme d’un pilier de taille nanométrique, composée de deux couches magnétiques séparées par une barrière d'oxide. L'empilement multicouche doit être élaboré sous ultravide par épitaxie par faisceau moléculaire (M.B.E.) ou par pulvérisation cathodique (P.V.D.). Ces méthodes d’élaboration sont développées par la société Vinci Technologies (finançant ce travail de thèse par une bourse CIFRE). L’amplitude de la magnétorésistance tunnel, utilisée pour lire les informations stockées dans la mémoire, dépend de l'orientation relative des aimantations des deux couches magnétiques. Par ailleurs, l'écriture de l’information dans le dispositif est obtenue grâce à l'effet de couple de transfert de spin, qui permet la manipulation de l’aimantation en utilisant un courant polarisé. Enfin, la stabilité thermique du dispositif est donnée par la barrière en énergie séparant les deux orientations d'aimantation (vers le haut et vers le bas dans le cas d'un dispositif perpendiculaire). Pour que les STT-MRAM soient une technologie compétitive, la tension critique nécessaire au retournement de l’aimantation (tension d'écriture) ainsi que le temps de retournement doivent être réduits, tandis que la stabilité thermique doit rester suffisamment élevée pour assurer la conservation de l'information. Au cours de ma thèse, en collaboration avec Vinci Technologies, les équipements nécessaires à la croissance des couches minces composant les jonctions tunnels (M.B.E. et P.V.D.) ont été optimisées. Grâce à cela, nous avons pu obtenir des couches minces avec une anisotropie perpendiculaire (hors du plan) bien caractérisée. J'ai ensuite concentré mon étude sur les dispositifs STT-MRAM industriels (IBM et STT) présentant une aimantation perpendiculaire pour comprendre le mécanisme de retournement de l’aimantation induite par le courant. J'ai alors pu identifier les paramètres pertinents influençant la valeur de la tension de retournement et proposer des solutions pour l'abaisser tout en préservant la stabilité thermique. Grâce à une étude concernant la probabilité de retournement d'aimantation, comparée à une modélisation macrospin et micromagnétique, j'ai mis en évidence un mécanisme de retournement variable en fonction de la configuration magnétique initiale. En effet, le champ rayonné par une couche magnétique sur une autre et la forme de la jonction tunnel ont un impact important sur la manipulation de l'aimantation / Spin Transfer Torque - Magnetic Random Access Memories – STT-MRAM – are developed as a new type of memory which could replace DRAM or SRAM. In the case of STT- MRAM, each memory point is a nanopillar magnetic tunnel junction composed of two magnetic layers separated by an oxide barrier. The multilayer stack can be grown under ultra-high vacuum using Molecular Beam Epitaxy (MBE) or Physical Vapor Deposition (PVD). Those systems are developed by the company Vinci Technologies (sponsoring this PhD work). The tunnel magnetoresistance signal which depends on the relative orientation of the two magnetizations is used to read the information stored in the device. The writing of the information in the device is realized thanks to the spin transfer torque effect, which allows magnetization manipulation using a spin current. The thermal stability of the device is given by the energy barrier separating the two magnetization orientations (up and down in the case of a perpendicular device). For STT-MRAM to be a competitive technology, the critical voltage needed for magnetization switching (writing voltage) as well as the switching time have to be reduced while the thermal stability remains high enough to ensure the retention of information. During my thesis, in collaboration with Vinci-Technologies several tools to grow thin films have been optimized. With such equipment, we were able to grow thin films with well characterized perpendicular (out-of-plane) anisotropy. I have then focused my study on industrial STT-MRAM devices (from two companies: IBM and STT) with an out-of-plane magnetization direction so as to understand the mechanism of current induced magnetization switching. By doing so, I could identify the relevant parameters influencing the switching voltage value and propose solutions to lower it while preserving thermal stability. Through a probabilistic study of magnetization reversal, coupled with macrospin and micromagnetic modeling studies, I have evidenced different switching mechanisms depending on the initial magnetic configuration. Indeed both the stray field from one magnetic layer to the other and the shape of the nanopillar have a large impact on magnetization manipulation