The invention of Li-ion batteries (LIBs) marks a new era of energy storage and allows for the large-scale industrialization of electric vehicles. However, the flammable organic electrolyte in LIBs raises significant safety concerns and has resulted in numerous fires and explosion accidents. In the pursuit of more reliable and stable battery solutions, interests in aqueous batteries composed of high-energy cathodes and water-based electrolytes are surging. Limited by the narrow electrochemical stability window (ESW) of water, conventional aqueous batteries only achieve inferior energy densities. Current development mainly focuses on manipulating the properties of aqueous electrolytes through introducing excessive salts or secondary solvents, which enables an unprecedentedly broad ESW and more selections of electrode materials while also resulting in some compromises. On the other hand, the interaction between electrodes and aqueous electrolytes and associated electrode failure mechanism, as the key factors that govern cell performance, are of vital importance yet not fully understood. Owing to the high-temperature calcination synthesis, most electrode materials are intrinsically moisture-free and sensitive to the water-rich environment. Therefore, compared to the degradation behaviors in conventional LIBs, such as cracking and structure collapse, the electrode may suffer more severe damage during cycling and lead to rapid capacity decay. Herein, we adopted multi-scale characterization techniques to identify the failure modes at cathode–electrolyte interface and provide strategies for improving the cell capacity and life during prolonged cycling. In Chapter 1, we first provide a background introduction of conventional non-aqueous and aqueous batteries. We then show the current development of modern aqueous batteries through electrolyte modification and their merits and drawbacks. Finally, we present typical electrode failure mechanism in non-aqueous electrolytes and discuss how water can further impact the degradation behaviors. In Chapter 2, we prepare three types of aqueous electrolytes and systematically evaluate the electrochemical performance of LiNixMnyCo1-x-yO2, LiMn2O4 and LiFePO4 in the aqueous electrolytes. Combing surface- and bulk-sensitive techniques, we identify the roles played by surface exfoliation, structure degradation, transition metal dissolution and interface formation in terms of the capacity decay in different cathode materials. We also provide fundamental insights into the materials selection and electrolyte design in the aqueous batteries. In Chapter 3, we select LiMn2O4 as the material platform to study the transition metal dissolution behavior. Relying on the spatially resolved X-ray fluorescence microscopy, we discover a voltage-dependent Mn dissolution/redeposition (D/R) process during electrochemical cycling, which is confirmed to be related to the Jahn–Teller distortion and surface reconstruction at different voltages. Inspired by the findings, we propose an approach to stabilize the material performance through coating sulfonated tetrafluoroethylene (i.e., Nafion) on the particle, which can regulate the proton diffusion and Mn dissolution behavior. Our study discovers the dynamic Mn D/R process and highlights the impact of coating strategy in the performance of aqueous batteries. In Chapter 4, we investigate the diffusion layer formed by transition metals at the electrode–electrolyte interface. With the help of customized cells and XFM technique, we successfully track the spatiotemporal evolution of the diffusion layer during soaking and electrochemical cycling. The thickness of diffusion layer is determined to be at micron level, which can be readily diminished when gas is generated on the electrode surface. Our approach can be further expanded to study the phase transformation and particle agglomeration at the interfacial region and provide insights into the reactive complexes. In Chapter 5, we reveal the correlation between the electrolytic water decomposition and ion intercalation behaviors in aqueous batteries. In the Na-deficient system, we discover that overcharging in the formation process can introduce more cyclable Na ions into the full cell and allows for a boosted performance from 58 mAh/g to 124 mAh/g. The mechanism can be attributed to the water oxidation on the cathode and Na-ion intercalation on the anode when the charging voltage exceeds the normal oxidation potential of cathode. We emphasize the importance of unique formation process in terms of the cell performance and cycle life of aqueous batteries. In Chapter 6, we summarize the results of our work and propose perspectives of future research directions. / Doctor of Philosophy / Li-ion batteries (LIBs) have dominated the market for portable devices and electric vehicles owing to their high energy density and good cycle life. However, frequent battery explosion accidents have raised significant safety concerns for all customers. The root cause can be attributed to the flammable organic electrolytes in conventional LIBs. To address this issue, aqueous batteries based on water-rich electrolytes attract intensive attention recently. Recent research progress has dramatically improved the energy density of aqueous batteries dramatically by modifying the properties of electrolytes. However, most electrode materials are incompatible with water, leading to severe side reactions and an unstable cycle life. Therefore, understanding the failure mechanism of electrode materials in the presence of water is crucial while not fully studied yet. Our projects systematically evaluate the degradation behavior of various electrodes in aqueous electrolytes and uncover the root cause of transition metal dissolution in the electrodes. Our studies shed light on improving battery capacity and cycle life through a specialized formation cycle and polymer coating process. Furthermore, we also provide new approaches to investigate the dynamic process occurring at electrode–electrolyte interface, which is applicable to other solid–liquid systems. In summary, our research reveals the correlation between the failure mechanism and the capacity decay in various electrode materials, proposing effective approaches to enhance the battery performance.

The fundamental understanding of the dynamic characteristics of metal dissolution and redeposition behavior at the electrode-electrolyte interface is essential, which provides the basis for the development of advanced energy and conversion devices (such as electrochromic devices, electrocatalysts, and batteries) with superior electrochemical performances. We firstly demonstrate the feasibility of resynthesizing the electrode surface chemistry and tuning the electrochemical reactions at the solid-liquid interface by selectively changing the electrolyte composition and electrochemical cycling conditions. Amorphous TiO2 surface layers can be formed on WO3 electrodes by adding exotic Ti cations to the electrolyte, and slow electrochemical cycling. The dissolution and redeposition of electrodes and surface coatings are intertwined, helping to establish a dissolution-redeposition equilibrium at the interface, which can inhibit metal dissolution, stabilize electrode morphology, and promote electrochemical performance. Since the diffusion layer generated by the dissolution of transition metals is ubiquitous at the electrochemical solid-liquid interface, by combining in situ three-electrode electrochemical reaction cell with advanced spatially resolved synchrotron X-ray fluorescence microscopy and micro-X-ray absorption spectroscopy, we then successfully demonstrate the formation and chemical identification of the diffusion layer. By studying the evolution of diffusion layers(tens of micrometers thick) when using WO3 electrodes in acidic electrolytes, we find that with increasing distance of the dissolved species from the electrode surface, the oxidation state remains largely unchanged, but the local electronic environment of the dissolved W species becomes more distorted. We subsequently report a systematic experimental approach by collecting a series of twodimensional fluorescence images at the electrodes to study electrode dissolution and redeposition under different electrochemical conditions. The results show that (1) metal dissolution and redeposition behaviors greatly evolve under different electrode polarization and electrolyte compositions; (2) metal dissolution and redeposition behaviors are independent of bulk electrolyte pH but depend on interfacial pH; and (3) the accumulation of interfacial dissolved species promotes the formation of polytungstate interfacial networks, which ultimately manifest as temporal heterogeneity of redeposition. Lastly, we provide an in-depth study of the underlying mechanism of electrochemicalcycling induced crystallization at the electrode-electrolyte interface through a combination of advanced synchrotron radiation characterization techniques and an in situ electrochemical reaction setup. We have discovered that (1) foreign cations from the electrolyte engender both tensile and compressive strains inside the crystal; (2) repeated electrode dissolution and redeposition promote crystal growth through a non-classical crystallization pathway of particle attachment, but the initial growth of crystals is inhibited by internal strains; and (3) as the strain accumulates, the crystal rotates or moves, which is the fundamental reason for the dynamic structure evolution of the crystal during electrochemical cycling. To our knowledge, this is the first study of electrochemical-cycling-induced crystallization and its strain evolution. These new findings reveal a previously unknown relationship between crystal growth and its internal strain at the electrode-electrolyte interface. / Doctor of Philosophy / Energy drives the entire economy and human civilization. Energy is needed in every aspect of everyday life, and energy is an essential raw material for making and delivering all the products and services that modern society needs, even though it is invisible to us. Since 2000, the global energy demand has increased tenfold and economic growth has spawned a large number of new energy industries, but billions of people are still in urgent need of clean water, sanitation, nutrition, and medical care. Energy is a key factor in meeting these basic requirements for all of humanity. The increasing global energy demand and the increasing impact of climate change have put enormous pressure on the energy market. Therefore, it is necessary to accelerate the relevant actions of energy transition in the world. Among them, the research and innovation of electrochemical energy storage and conversion technology is a major direction. The electrochemical energy storage and conversion technology heavily relies on the various electrochemical reactions in practical devices such as rechargeable batteries, water electrocatalysts, and energy-saving electrochromic smart windows. Within numerous electrochemical reactions under the application, the solid (electrode)-liquid (electrolyte) interface dominates the most important electrochemical reactions. How to understand thephysicochemical reactions at the interface under electrochemical conditions is of great significance. As a major component of research innovations, this research contributes to the design of rational electrode materials, electrolyte compositions, and more efficient and durable electrochemical performance. From a fundamental perspective, my research enriches the understanding of solid-liquid interface reactions under electrochemical conditions, pointing out that electrode dissolution and redeposition and dynamic structural evolution of solid-liquid interfaces are important for further optimizing electrode material design and improving electrochemical performance.

One of the most important challenges in low-temperature fuel cell technology is improving the catalytic efficiency at the electrode-catalyst where the oxygen reduction reaction (ORR) occurs. Platinum is the best pure catalyst for this reaction but its high cost and scarcity hinder the commercial implementation of fuel cells in automobiles. Pt-based alloys are promising alternatives to substitute platinum while maintaining the efficiency and life-time of the pure catalyst. However, the acid medium and the oxidation of the surface reduce the activity and durability of the alloy catalyst through changes in its local composition and structure. Molecular simulation techniques are applied to characterize the thermodynamics and dynamic evolution of the surface of platinum-based alloy catalysts under reaction conditions.1-10 A simulation scheme of the surface oxidation is proposed which combines classical molecular dynamics (MD) and density functional theory (DFT). This approach is able to reproduce the main features of the oxidation phenomena observed experimentally, it is concluded that the dissolution mechanism of metal atoms involves: 1) Surface segregation of alloy atoms, 2) oxygen absorption into the subsurface of the catalyst, and 3) metal detachment through the interaction with ions in the solvent. Therefore, to improve the durability of platinum-based alloy catalysts, the steps of the dissolution mechanism must be prevented. A versatile 3-D kinetic Monte Carlo (KMC) code is developed to study the degradation and dealloying in nanocatalysts. The results on the degradation of Pt nanoparticles under different potential regimes demonstrate that the dissolution depends on the potential path to which the nanocatalyst is exposed. Metal atoms detach from the boundaries of (111) facets expecting a reduction in the activity of the nanoparticle. Also, the formation of Pt hollow nanoparticles by the Kirkendall effect is addressed, the role of vacancies is crucial in the removal of the non-noble core that yields to hollow nanoparticles. To investigate the reasons for the experimentally found enhanced ORR activity in porous/hollow nanoparticles, the effect of subsurface vacancies on the main ORR activity descriptors is studied with DFT. It is found that an optimum amount of vacancies may enhance the ORR activity of Pt-monolayer catalysts over certain alloy cores by changing the binding energies of O and OH.

Den ökande trenden med att använda tillverkade nanopartiklar (NPs) i olika tillämpningar i samhället har väckt oro när det gäller deras växelverkan med naturliga ekosystem. Syftet med denna studie är att ta fram data under förhållanden som simulerar realistiska scenarios och syftar till att förstå växelverkan mellan koboltbaserade NPs (Co, Co3O4 och Co SCS) och nickelbaserade NPs (Ni, NiO och Ni SCS) med naturliga nedbrytningsprodukter (biomolekyler, ekokorona) som utsöndras från Daphnia magna. Adsorption, metallfrisättning och stabilitet i närvaro av dessa biomolekyler (EC) i syntetiskt sötvatten (FW) är huvudfokus för denna multianalytiska studie. Förändringar av ytans sammansättning på grund av växelverkan mellan NPs och EC studerades parallellt. Resultaten jämfördes med resultat för NPs i närvaro av naturligt organiskt material (NOM) som tidigare tagits fram av medlemmar i professor Inger Odnevalls grupp vid avdelningen för Yt- och korrosionsvetenskap på KTH. ATR-IR-studierna visade på en tydlig och stark adsorption av EC till samtliga undersökta NPs där NPs av metall- och metalloxider vilka uppvisade den snabbaste adsorptionen. Uppmätta zeta-potentialer bekräftade en större adsorption av EC till NPs av metalloxider jämfört med övriga NPs. NTA-studier visade på en tydlig minskningen av partikelstorleken hos de undersökta NPs vid exponering i FW med EC jämfört med endast FW i vilken NPs av metalloxider uppvisade den mest signifikanta förändringen. Växelverkan mellan EC och NPs resulterade i en ökad metallfrisättning för flertalet av den undersökta NPs, med undantag av Ni SCS NPs. De nickelbaserade NPs uppvisade en lägre frisättningsnivå jämfört med de koboltbaserade NPs. Slutligen visade jämförelsen mellan närvaron av NOM och EC i syntetiskt sötvatten en signifikant skillnad i både zeta-potential och partikelstorlek under korta tider. Resultaten tyder på att adsorption av EC till NPs ger sämre skydd mot partikel-agglomerering än motsvarande adsorption av NOM. / The increasing trend of implementing engineered nanoparticles (NPs) in different societal applications has escalated the concerns on the risk of their interaction with natural ecosystems. With the lack of knowledge on NP interactions with biomolecules in ecosystems, this study provides a rather realistic scenario that aims to understand the interaction of cobalt-based NPs (Co, Co3O4, and Co SCS NPs) and nickel-based NPs (Ni, NiO and Ni SCS  NPs) with natural degradation products (eco-corona biomolecules) excreted from Daphnia magna. As the main focus of this study, the adsorption, dissolution, and stability of NPs in presence of the eco-corona biomolecules (EC) in synthetic freshwater (FW) were investigated by a multi-analytical approach. The effect of surface composition on the interaction of NPs was evaluated in parallel. The results were compared with NPs interacting with natural organic matters (NOM), research results previously performed by members of Prof. Odnevall’s group at the Division of Surface and Corrosion Science, KTH. ATR-IR studies showed a clear and strong adsorption of EC to all the investigated NPs with metallic and metal oxide NPs exhibiting the fastest adsorption. Zeta potential values corroborated the intensive adsorption of EC to metal oxides compared to the other NPs. NTA studies showed the decrease in particle size of the investigated NPs upon the exposure to EC compared to FW only with metal oxide NPs exhibiting the most significant change. The presence of EC enhanced the dissolution of most investigated NPs with Ni SCS NPs as an exception. Furthermore, nickel-based NPs showed lower dissolution than cobalt-based NPs. Finally, the comparison between effects in the presence of NOM and EC in freshwater showed significant differences in zeta potential as well as particle size over short-term exposures suggesting that the adsorption of EC to NPs provides less protection against agglomeration than adsorption of NOM.

<div>Inorganic metal chalcogenide materials are of great importance in the semiconducting field for various electronic applications such as photovoltaics, thermoelectrics, sensors, and many others. Compared to traditional vacuum processing routes, solution processing provides an alternate cost-effective route to synthesize these inorganic materials through its ease of synthesis and device fabrication, higher material utilization, mild processing conditions, and opportunity for roll-to-roll manufacturing. One such versatile solution chemistry involving a mixture of amine and thiol species has evolved in the past few years as a common solvent for various precursor dissolutions including metal salts, metal oxides, elemental metals, and chalcogens.</div><div><br></div><div>The amine-thiol solvent system has been used by various researchers for the fabrication of inorganic materials, but without the complete understanding of the chemistry involved in this system, utilizing its full potential, and overcoming any inherent limitations will be difficult. So, to identify the organometallic complexes and their reaction pathways, the precursor dissolutions in amine-thiol solutions, specifically for elemental metals like Cu, In and chalcogens like Se, Te were studied using X-ray absorption, nuclear magnetic resonance, infrared, and Raman spectroscopy along with electrospray ionization mass spectrometry techniques. These analyses suggested the formation of metal thiolate complexes in the solution with the release of hydrogen gas in the case of metal dissolutions confirming irreversibility of the dissolution. Insights gained for chalcogen dissolutions confirmed the formation of different species like monoatomic or polyatomic clusters when different amine-thiol pair is used for dissolution. Results from these analyses also identified the role of each component in the dissolution which allowed for tuning of the solutions by isolating the complexes to reduce their reactivity and corrosivity for commercial applications.</div><div><br></div><div>After identifying complexes in metal dissolution for Cu and In metals, the decomposition pathway for these complexes was studied using X-ray diffraction and gas chromatography mass spectrometry techniques which confirmed the formation of phase pure metal chalcogenide material with a release of volatile byproducts like hydrogen sulfide and thiirane. This allowed for the fabrication of impurity-free thin-film Cu(In,Ga)S2 material for use in photovoltaic applications. The film fabrication with reduced carbon impurity achieved using this solvent system yielded a preliminary promising efficiency beyond 12% for heavy alkali-free, low bandgap CuInSe2 material. Along with promising devices, by utilizing the understanding of the chalcogen complexation, a new method for CuInSe2 film fabrication was developed with the addition of selenide precursors and elemental selenium which enabled first-ever fabrication of a solution-processed CuInSe2 thin film with thickness above 2 μm and absence of any secondary fine-grain layer.</div><div><br></div><div>Along with thin-film fabrication, a room temperature synthesis route for lead chalcogenide materials (PbS, PbSe, PbTe) with controlled size, shape, crystallinity, and composition of nanoparticle self-assemblies was demonstrated. Micro-assemblies formed via this route, especially the ones with hollow-core morphology were subjected to a solution-based anion and cation exchange to introduced desired foreign elements suitable for improving the thermoelectric properties of the material. Adopting from traditional hot injection and heat up synthesis routes, a versatile synthesis procedure for various binary, ternary, and quaternary metal chalcogenide (sulfide and sulfoselenide) nanoparticles from elemental metals like Cu, Zn, Sn, In, Ga, and Se was developed. This new synthesis avoids the incorporation of impurities like O, Cl, I, Br arising from a traditional metal oxide, halide, acetate, or other similar metal salt precursors giving an opportunity for truly impurity-free colloidal metal chalcogenide nanoparticle synthesis.</div>