Spelling suggestions: "subject:"metamaterials,""
21 |
Improving the Performance of Dual Linear Polarization Antennas with Metamaterial StructuresAqbi, Sadiq 22 February 2018 (has links) (PDF)
In this dissertation, the operation of dual-linear polarized antennas is considered in order to provide ideal performance suited for several applications including polarimetric synthetic aperture radar (SAR), wireless and satellite communications. The underlying objectives realized in this work are reported as design realizations of dual-linear polarized antennas with low cross polarization patterns and high isolation between ports that employ special properties of the electromagnetic metamaterial (MTM) structures. Some of these key properties appear as negative permittivity, negative permeability, negative refractive index, and antiparallel nature of the phase velocity and the group velocity. The antenna design is carried out at two frequencies, 5.5 GHz and 10 GHz, and key physical issues that affect the operation of dual-linear polarization operation antennas are treated in light of electromagnetic MTM properties.
It’s well known that a dual linear polarized antenna poses a big challenges such as cross polarization patterns and high mutual coupling between two input ports. Therefore, these drawbacks are key topic that receive significant attention in literature which reports on how to mitigate these drawbacks, however, at the expense of complexity of the antenna structures. The MTM structures have received considerable coverage in antenna research for obtaining size reduction, directivity enhancement, and beam steering. For this purpose, different MTMs structures are chosen in this thesis for achieving additional improvements, while keeping the antenna design as simple as possible, something which is very difficult to accomplish using conventional design methods. / In der folgenden Dissertation wird der Einsatz von zweifach linear polarisierten Antennen zur idealen Ausführung von verschiedenen Anwendungen, einschließlich von polarimetrischen Synthetic Aperture Radar (SAR), kabellose und satellitengestützte Kommunikation, diskutiert. Die Ziele dieser Arbeit werden dargestellt durch die Gestaltung von zweifach linear polarisierten Antennen mit gering Kreuz-Polarisationsmustern und die starke Isolation zwischen den Ports durch die einzigartigen Eigenschaften der Strukturen des elektromagnetischen Metamaterials (electromagnetic metamaterial; MTM). Einige dieser Eigenschaften treten als negative Permittivität, negative Permeabilität, negativer Brechungsindex und als antiparallel Richtungen (Gegenvektor) der Phasen-und Gruppengeschwindigkeit auf. Somit wird die Antennengestaltung auf zwei Frequenzen übertragen, 5,5GHz und 10 GHz, und die Ausführung der zweifach linearen Polarisation wird durch die elektromagnetischen Eigenschaften des MTM illustriert.
Weil die Kreuzpolarisationsmuster und starke gegenseitige Koppelung zwischen zwei Input-Ports bei einer zweifach linear polarisierten Antenne große Schwierigkeiten bereiten, werden diese im Großteil der Fachliteratur als Schwerpunkte gesetzt, was zu einer Milderung der Nachteile führte, jedoch dafür die Komplexität der Antennenstruktur zunahm. Die Vielfalt an MTM ist ein bedeutender Teil im Bereich der Antennenforschung einschließlich der Größenverkleinerung, der Verbesserung der Richtcharakteristik und der Strahlensteuerung. Für diesen Zweck werden in dieser Dissertation verschiedenste MTM Strukturen ausgewählt um weitere Verbesserungen der Antennenstruktur zu ermöglichen und gleichzeitig die Einfachheit der Struktur zu bewahren, was mit konventionellen Gestaltungsmethoden nur schwer zu erreichen ist.
|
22 |
SHOCK MITIGATION AND WAVE CONTROL USING ELASTIC METAMATERIAL STRUCTURESAlamri, Sagr Mubarak January 2018 (has links)
No description available.
|
23 |
Ultrasonic subwavelength acoustic focusing and imaging using a 2D membrane metamaterialLani, Shane W. 27 May 2016 (has links)
A metasurface or 2D metamaterial composed of a membrane array can support an interesting acoustic wave field. These waves are evanescent in the direction normal to the array and can propagate in the immersion fluid immediately above the metasurface. These waves are a result of the resonant membranes coupling to the fluid medium and propagate with a group and phase speed lower than that of the bulk waves in the surrounding fluid. This work examines and utilizes these evanescent surface waves using Capacitively Micromachined Ultrasonic Transducers (CMUT) as a specific example. CMUT arrays can generate and detect membrane displacement capacitively, and are shown to support the surface waves capable of subwavelength focusing and imaging. A model is developed that can solve for the modes of the membrane array in addition to transiently modeling the behavior of the array. It is found that the dispersive nature of the waves is dependent on the behavior of the modes of the membrane array. Two-dimensional dispersion analysis of the metasurface shows evidence of four distinct frequency bands of surface wave propagation: isotropic, anisotropic, directional band gap, and complete band gap around the first resonant frequency of the membrane. Some of the frequencies in the partial band gap show concave equifrequency contours capable of negative refraction. The dispersion and modal properties are also examined as to how they are affected by basic array parameters. Potential applications of this wave field are examined in the context of subwavelength focusing and imaging. Several methods of acoustic focusing are used on an array consisting of dense grid of membranes and several membranes spatially removed from the structure. Subwavelength acoustic focusing to a resolution of λ/5 is shown in simulations and verified with experiments. An imaging test is also performed in which a subwavelength defect is localized. This fundamental work in characterizing the waves above the membrane metasurfaces is expected to have impact and implications for transducer design, resonant sensors, 2D acoustic lenses, and subwavelength focusing and imaging.
|
24 |
Metamaterials and their applications towards novel imaging technologiesWatts, Claire January 2015 (has links)
Thesis advisor: Willie J. Padilla / This thesis will describe the implementation of novel imaging applications with electromagnetic metamaterials. Metamaterials have proven to be host to a multitude of interesting physical phenomena and give rich insight electromagnetic theory. This thesis will explore not only the physical theory that give them their interesting electromagnetic properties, but also the many applications of metamaterials. There is a strong need for efficient, low cost imaging solutions, specifically in the longer wavelength regime. While this technology has often been at a standstill due to the lack of natural materials that can effectively operate at these wavelengths, metamaterials have revolutionized the creation of devices to fit these needs. Their scalability has allowed them to access regimes of the electromagnetic spectrum previously unobtainable with natural materials. Along with metamaterials, mathematical techniques can be utilized to make these imaging systems streamlined and effective. Chapter 1 gives a background not only to metamaterials, but also details several parts of general electromagnetic theory that are important for the understanding of metamaterial theory. Chapter 2 discusses one of the most ubiquitous types of metamaterials, the metamaterial absorber, examining not only its physical mechanism, but also its role in metamaterial devices. Chapter 3 gives a theoretical background of imaging at longer wavelengths, specifically single pixel imaging. Chapter 3 also discusses the theory of Compressive Sensing, a mathematical construct that has allowed sampling rates that can exceed the Nyquist Limit. Chapter 4 discusses work that utilizes photoexcitation of a semiconductor to modulate THz radiation. These physical methods were used to create a dynamic THz spatial light modulator and implemented in a single pixel imaging system in the THz regime. Chapter 5 examines active metamaterial modulation through depletion of carriers in a doped semiconductor via application of a bias voltage and its implementation into a similar single pixel imaging system. Additionally, novel techniques are used to access masks generally unobtainable by traditional single pixel imagers. Chapter 6 discusses a completely novel way to encode spatial masks in frequency, rather than time, to create a completely passive millimeter wave imager. Chapter 7 details the use of telecommunication techniques in a novel way to reduce image acquisition time and further streamline the THz single pixel imager. Finally, Chapter 8 will discuss some future outlooks and draw some conclusions from the work that has been done. / Thesis (PhD) — Boston College, 2015. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Physics.
|
25 |
Designs of Novel Antennas and Artificial Electromagnetic Cover Layers for Medical Implant Communication SystemsYang, Ya-Wen 16 July 2012 (has links)
In this thesis, we design novel implantable antennas for medical implant communication systems and it could operate with the metamaterial which is the artificial electromagnetic (EM) cover layer. The metamaterial based matching layer placed on the surface of the body can improve the performance of the implantable antenna.
First, we propose two layers and three layers antenna design. The three layers antenna features high tolerance, high gain, low-profile and miniaturization. The antenna achieves gain −21.7 dBi and efficiency 0.2%. Compared with other literatures of implanted antenna design, the proposed three layers antenna reveals the best gain with similar dimensions. Furthermore, its frequency response is insensitive to the change of the implanted environment.
The conception of impedance matching is applied to further improve the gain of the proposed antenna. The matching layers are realized by utilizing the metamaterial and it is placed between the body and the air. In this case, the gain of the three¡Vlayer antenna can be enhanced by 1.23¡V5.2 dB. Furthermore, we propose a size reduction technique to reduce the thickness of the matching layer. The miniature matching layers can increase the gain of the three¡Vlayer antenna by 1.64 dB and 2.63 dB with the dimension of 40¡Ñ40¡Ñ4mm³ and 60¡Ñ60¡Ñ4mm³ respectively.
Finally, we propose a co¡Vdesign method of the antenna and metamaterial. The antenna will resonate after placing metamaterial on the surface of the body. So that we can control the antenna whether to transmit power or not by the circuit design in the biomedical device to detect the return loss of the antenna.
|
26 |
Microstrip post production tuning bar error and compact resonators using negative refractive index metamaterialsScher, Aaron David 29 August 2005 (has links)
In this thesis, two separate research topics are undertaken both in the general area
of compact RF/microwave circuit design. The first topic involves characterizing the
parasitic effects and error due to unused post-production tuning bars. Such tuning bars
are used in microwave circuit designs to allow the impedance or length of a microstrip
line to be adjusted after fabrication. In general, the tuning bars are simply patterns of
small, isolated sections of conductor adjacent to the thru line. Changing the impedance
or length of the thru line involves bonding the appropriate tuning bars to the line.
Unneeded tuning bars are simply not removed and left isolated. Ideally, there should be
no coupling between these unused tuning bars and the thru line. Therefore, the unused
tuning bars should have a negligible effect on the circuit??s overall performance. To
nullify the parasitic effects of the tuning bars, conventional wisdom suggests placing the
bars 1.0 to 1.5 substrate heights away from the main line. While successful in the past,
this practice may not result in the most efficient and cost-effective placement of tuning
bars in today??s compact microwave circuits. This thesis facilitates the design of compact
tuning bar configurations with minimum parasitic effects by analyzing the error
attributable to various common tuning bar configurations with a range of parameters and
offset distances. The error is primarily determined through electromagnetic simulations,
and the accuracy of these simulations is verified by experimental results. The second
topic in this thesis involves the design of compact microwave resonators using the
transmission line approach to create negative refractive index metamaterials. A survey
of the major developments and fundamental concepts related to negative refractive index
technology (with focus on the transmission line approach) is given. Following is the
design and measurement of the compact resonators. The resonators are also compared to
their conventional counterparts to demonstrate both compactness and harmonic
suppression.
|
27 |
Fano-resonant plasmonic metamaterials and their applicationsWu, Chihhui 20 November 2012 (has links)
Manipulating electromagnetic fields with plasmonic nanostructures has attracted researchers from interdisciplinary areas and opened up a wide variety of applications. Despite the intriguing aspect of inducing unusual optical properties such as negative indices and indefinite permittivity and permeability, engineered plasmonic nanostructures are also capable of concentrating electromagnetic waves into a diffraction-unlimited volume, thus induce incredible light-matter interaction. In this dissertation, I’ll discuss about a class of plasmonic structures that exhibit the Fano resonance. The Fano resonance is in principle the interference between two resonant modes of distinct lifetimes. Through the Fano resonance, the electromagnetic energy can be trapped in the so called “dark” mode and induce strong local field enhancement. A variety of Fano resonant nanostructures ranging from periodic planar arrays to simple clusters composed of only two particles are demonstrated in this dissertation. By artificially designing the dimensions of the structures, these Fano-resonant materials can be operated over a broad frequency range (from visible to mid-IR) to target the specific applications of interest. In this dissertation, I’ll show the following research results obtained during my PhD study: (1) the double-continuum Fano resonant materials that can slow down the speed of light over a broad frequency range with little group velocity dispersion. (2) Ultra-sensitive detection and characterization of proteins using the strong light-matter interaction provided by the Fano-reonant asymmetric metamaterials. (3) Metamaterials absorbers with nearly 100 % absorbance, tunable spectral position, expandable bandwidth, and wide angle absorption. These Fano-resonant materials can have profound influences in the areas of optical signal processing, life science, bio-defense, energy harvesting and so on. / text
|
28 |
Investigation of Microwave Antennas with Improved PerformancesZhou, Rongguo January 2010 (has links)
This dissertation presents the investigation of antennas with improved performances at microwave frequencies. It covers the following three topics: the study of the metamaterial with near-zero index of refraction and its application in directive antenna design, the design technique of a wideband circularly polarized patch antenna for 60GHz wireless application and the investigation of a novel direction of arrival (DOA) estimation technique inspired by human auditory system. First, the metamaterial composed of two-dimensional (2-D) metallic wire arrays is investigated as an effective medium with an effective index of refraction less than unity (n(eff) < 1). The effective medium parameters (permittivity ε(eff), permeability μ(eff) and n(eff)) of a wire array are extracted from the finite-element simulated scattering parameters and verified through a 2-D electromagnetic band gap (EBG) structure case study. A simple design methodology for directive monopole antennas is introduced by embedding a monopole within a metallic wire array with n(eff) < 1 at the antenna operating frequencies. The narrow beam effect of the monopole antenna is demonstrated in both simulation and experiment at X-band (8 – 12 GHz). The measured antenna properties including return loss and radiation patterns are in good agreement with simulation results. Parametric studies of the antenna system are performed. The physical principles and interpretations of the directive monopole antenna embedded in the wire array medium are also discussed. Second, a fully packaged wideband circularly polarized patch antenna is designed for 60GHz wireless communication. The patch antenna incorporates a diagonal slot at the center and features a superstrate and an air cavity backing to achieve desired performances including wide bandwidth, high efficiency and low axial ratio. The detailed design procedure of the circularly polarized antenna, including the design of the microstrip-fed patch antenna and the comparison of the performances of the antenna with different feeding interfaces, is described. The experimental results of the final packaged antenna agree reasonably with the simulation results. Third, an improved two-antenna direction of arrival (DOA) estimation technique is explored, which is inspired by the human auditory system. The idea of this work is to utilize a lossy scatter, which emulates the low-pass filtering function of the human head at high frequency, to achieve more accurate DOA estimation. A simple 2-monopole example is studied and the multiple signal classification (MUSIC) algorithm is applied to calculate the DOA. The improved estimation accuracy is demonstrated in both simulation and experiment. Furthermore, inspired by the sound localization capability of human using just a single ear, a novel direction of arrival estimation technique using a single UWB antenna is proposed and studied. The DOA estimation accuracies of the single UWB antenna are studied in the x-y, x-z and y-z planes with different Signal to Noise Ratios (SNR). The proposed single antenna DOA technique is demonstrated in both simulation and experiment, although with reduced accuracy comparing with the case of two antennas with a scatter in between. At the end, the conclusions of this dissertation are drawn and possible future works are discussed.
|
29 |
Influence of disorder on microwave left-handed metamaterialShahbazali, Maryam, Baki, Wael January 2015 (has links)
No description available.
|
30 |
Nano-Engineering Metamaterials and Metafilms for High-Efficiency Solar Energy Harvesting and ConversionJanuary 2016 (has links)
abstract: The energy crisis in the past decades has greatly boosted the search for alternatives to traditional fossil foils, and solar energy stands out as an important candidate due to its cleanness and abundance. However, the relatively low conversion efficiency and energy density strongly hinder the utilization of solar energy in wider applications. This thesis focuses on employing metamaterials and metafilms to enhance the conversion efficiency of solar thermal, solar thermophotovoltaic (STPV) and photovoltaic systems.
A selective metamaterial solar absorber is designed in this thesis to maximize the absorbed solar energy and minimize heat dissipation through thermal radiation. The theoretically designed metamaterial solar absorber exhibits absorptance higher than 95% in the solar spectrum but shows emittance less than 4% in the IR regime. This metamaterial solar absorber is further experimentally fabricated and optically characterized. Moreover, a metafilm selective absorber with stability up to 600oC is introduced, which exhibits solar absorptance higher than 90% and IR emittance less than 10%.
Solar thermophotovoltaic energy conversion enhanced by metamaterial absorbers and emitters is theoretically investigated in this thesis. The STPV system employing selective metamaterial absorber and emitter is investigated in this work, showing its conversion efficiency between 8% and 10% with concentration factor varying between 20 and 200. This conversion efficiency is remarkably enhanced compared with the conversion efficiency for STPV system employing black surfaces (<2.5%).
Moreover, plasmonic light trapping in ultra-thin solar cells employing concave grating nanostructures is discussed in this thesis. The plasmonic light trapping inside an ultrathin GaAs layer in the film-coupled metamaterial structure is numerically demonstrated. By exciting plasmonic resonances inside this structure, the short-circuit current density for the film-coupled metamaterial solar cell is three times the short-circuit current for a free-standing GaAs layer.
The dissertation is concluded by discussing about the future work on selective solar thermal absorbers, STPV/TPV systems and light trapping structures. Possibilities to design and fabricate solar thermal absorber with better thermal stability will be discussed, the experimental work of TPV system will be conducted, and the light trapping in organic and perovskite solar cells will be looked into. / Dissertation/Thesis / Doctoral Dissertation Mechanical Engineering 2016
|
Page generated in 0.078 seconds