1 |
Design and development of a two dimensional scanning molecular tagging velocimetry (MTV) systemAhmad, Farhan Unknown Date
No description available.
|
2 |
Novel Bioinspired Pumping Models for Microscale Flow TransportAboelkassem, Yasser 11 September 2012 (has links)
Bioinspiration and biomimetics are two increasingly important fields in applied science and mechanics that seek to imitate systems or processes in nature to design improved engineering devices. Here, we are inspired and motivated by microscale internal flow transport phenomena in insect tracheal networks, which are observed to be induced by the rhythmic tracheal wall contractions. These networks have been shown to mange fluid very efficiently compared to current state-of-the-art microfluidic devises.
This dissertation presents two versions of a novel bioinspired pumping mechanism that is neither peristaltic nor belongs to impedance mismatch class of pumping mechanisms. The insect-inspired pumping models presented here are expected to function efficiently in the microscale flow regime in a simple channel/tube geometries or a complex network of channels. The first pumping approach shows the ability of inducing a unidirectional net flow by using an inelastic tube or channel with at least two moving contractions. The second pumping approach presents a new concept for directional pumping, namely ``selective pumping in a network.". The results presented here might help in mimicking features of physiological systems in insects and guide efforts to fabricate novel microfluidic devices with improved efficiency.
In this study, both theoretical analysis and Stokeslets-meshfree computational methods are used to solve for the 2D and 3D viscous flow transport in several micro-geometries (tubes, channels and networks) with prescribed moving wall contractions. The derived theoretical analysis is based on both lubrication theory and quasi-steady approximations at low Reynolds numbers. The meshfree numerical method is based on the method of fundamental solutions (MFS) that uses a set of singularized force elements ``Stokeslets'' to induce the flow motions. Moreover, the passive particle tracking simulation approach in the Lagrangian frame of reference is also used to strengthen and support our pumping paradigm developed in this dissertation. / Ph. D.
|
3 |
Rhéologie de polymères fondus dans des entrefers micrométriques / Rheology of polymer melts in microscale geometriesAkkoyun, Serife 11 February 2013 (has links)
Depuis quelques années, la microplasturgie est un secteur en plein développement. Cependant, le comportement rhéologique des matériaux polymères dans des géométries très minces (dimension inférieure à 100 µm) n’est pas bien caractérisé. Peu de travaux ont été entrepris à ce sujet, en particulier en ce qui concerne les écoulements de Poiseuille qui sont pourtant les plus représentatifs des conditions de mise en œuvre usuelles. Ainsi, ce travail a pour but la mise au point d’une méthode expérimentale permettant d’obtenir des données pertinentes afin de caractériser de façon approfondie le comportement des matériaux polymères en écoulement de Poiseuille dans des géométries micrométriques. Afin de décrire au mieux la physique de tels écoulements, nous avons également cherché à les simuler numériquement, soit en utilisant des lois de comportement classiques, soit à l’aide de modèles se référant à la dynamique moléculaire. Pour atteindre ces objectifs, une filière à fente plate instrumentée avec des capteurs de pression et température, d’entrefer variant entre 50 et 200µm, a été conçue afin d’effectuer des mesures à l’aide d’un rhéomètre capillaire. Ce dispositif a été validé en confrontant les mesures à celles obtenues par d’autres méthodes (rhéométrie capillaire en filière classique et rhéométrie dynamique). Le glissement à la paroi a également été étudié, selon la méthode de Mooney. La simulation numérique de l’écoulement a d’abord été réalisée à l’aide de POLYFLOW®. L’effet de la pression sur la géométrie ainsi que sur le matériau polymère a été étudié. Puis, l’écoulement a également été simulé sous MATLAB® en utilisant des lois constitutives de type moléculaire basées sur le modèle du tube de Doï-Edwards ainsi que sur le concept de « Molecular Stress Function » introduit par Wagner pour rendre compte des effets d’orientation des molécules (variation du diamètre du tube) dans le champ de contraintes. L’écart constaté entre ces calculs et les résultats expérimentaux est expliqué et discuté à la lumière des simulations sous POLYFLOW®. Il modifie les perspectives d’étude de ce type d’écoulements. / The rheological behavior of polymer melts in microscale geometries is not really understood yet. In such processes which involve gaps thinner than 100µm (e.g. micro-injection molding), the material behaves differently compared to macroscopic flows. Besides, most polymer processing techniques involve pressure flows and only very few studies can be found about pressure flows in such thin geometries. The aim of this study was, first, to develop an experimental method which can provide relevant data about the rheological behavior of polymer melts in pressure flow taking place in microscale geometries. In order to get better descriptions of the physics involved in such flows, numerical simulation with commercial and home-made softwares was also implemented, especially with molecular dynamics constitutive models. Thus, a modular rheometrical slit die equipped with pressure and temperature transducers was designed to be adapted to a capillary rheometer, with different gap dimensions available, between 50µm and 200µm. The device was assessed by comparing to usual rheological ones, and wall slip was investigated according to Mooney’s method. Then, simulation of the flow was performed with POLYFLOW®. The pressure effect on the geometry and on the polymer material was investigated. Besides, simulation was also conducted with MATLAB® by implementing the Doi-Edwards’ tube model (reptation theory) and the Molecular Stress Function concept of Wagner to take into account the enhanced orientation of the molecules due to the very close vicinity of the die walls. Experimental results were compared to calculations, and the discussion of the discrepancies was supported by POLYFLOW® simulations. The conclusions somewhat modify the prospects for future studies of such flows.
|
Page generated in 0.0645 seconds