Les mouvements cellulaires collectifs jouent un rôle fondamental dans de nombreux phénomènes biologiques (développement, régénération, cancer, etc.). Pour autant, les mécanismes régissant ces mouvements sont toujours mal connus. Nous nous proposons dans cette thèse d'étudier deux situations expérimentales mettant en jeu ces mouvements dans des monocouches cellulaires.Nous nous intéressons en premier lieu à des cellules HBEC, épithéliales mais peu cohésives. On calcule par PIV (vélocimétrie par images de particules) le champ de vitesse dans des populations de cellules déposées de manière homogène sur le substrat. On observe un ralentissement des mouvements et une progression non monotone de leur corrélation spatiale en fonction du temps. La combinaison de nos expériences, d'un modèle analytique et de simulations nous permet de conclure que cette évolution est la signature d'une transition de jamming contrôlée par la vitesse et que le ralentissement est dû à une maturation des jonctions cellule-cellule et des adhésions cellules-substrat.Nous étudions ensuite la compétition pour l'espace entre deux lignées HEK-HT, l'une normale et l'autre transformée par une mutation oncogénique RasV12. On dépose face à face les deux populations, porteuses d'un fluorophore différent, séparées par une bande de substrat libre pour les faire migrer l'une vers l'autre. On combine l’analyse des images de fluorescence aux techniques de PIV pour étudier la dynamique des deux fronts de population. Après contact et malgré un certain mélange des deux types, les monocouches forment une interface relativement bien définie qui se déplace dans le sens d'avancée du type transformé. / Collective cellular motion plays a fundamental role in several biological phenomena: development, regeneration, cancer, etc. However, the mechanisms behind this motion are still poorly understood. In this thesis, we study two experimental situations involving collective motion in cellular monolayers.We first look at HBEC cells, which are epithelial but weakly cohesive. Using particle image velocimetry (PIV), we monitor the velocity field in populations of cells homogeneously seeded on the susbtrate. We observe a slowdown in the cellular motion as its spatial correlation non-monotonically changes with time. Combining our experiments with an analytical model and simulations allows us to conclude that the system undergoes a jamming transition with speed as the main control parameter. We also show that the observed slowdown is a consequence of the maturation of cell-cell junctions and cell-substrate adhesions.We then study the competition for space between two HEK-HT cell lines, one being normal and the other being transformed by an oncogenic RasV12 mutation. The two fluorescently-labeled populations are set to migrate antagonistically towards an in-between stripe of free substrate. Through analysis of the fluorescence images and PIV methods, we study the dynamics of both population fronts. After contact, even though the two types mix to a certain extent, we observe a relatively well-defined interface, which moves towards the normal population.

<p>Immobilization of different bio- and organic molecules on solid supports is fundamental within many areas of science. Sometimes, it is desirable to obtain a directed orientation of the molecule in the immobilized state. In this thesis, the copper (I) catalyzed Huisgen 1,3-dipolar cycloaddition, referred to as a “click chemistry” reaction, was explored as a means to perform directed immobilization of small molecule ligands on gold surfaces. The aim was to synthesize alkyne- and azide-terminated alkanethiols that would form well-organized self assembled monolayers (SAMs) on gold from the commercially available substances orthoethylene glycol and bromo alkanoic acid. N-(23-azido-3,6,9,12,15,18,21-heptaoxatricosyl)-n-mercaptododekanamide/hexadecaneamide (n = 12, 16) were successfully synthesized and allowed to form SAMs of different compositions to study how the differences in density of the functional groups on the surface would influence the structure of the monolayer and the click chemistry reaction. The surfaces were characterized by different optical methods: ellipsometry, contact angle goniometry and infrared reflection-absorption spectroscopy (IRAS). The click reaction was found to proceed at very high yields on all investigated surfaces. Finally, the biomolecular interaction between a ligand immobilized by click chemistry on the gold surfaces and a model protein (bovine carbonic anhydrase) was demonstrated by surface plasmon resonance using a Biacore system.</p>

This work focuses on the emission processes of metal-organic clusters MmMen, (M is the organic molecule and Me the metal atom) ejected from self assembled monolayers (SAMs) of alkanethiols on gold after keV ion bombardment. These aggregates are often observed upon energetic ion bombardment of strongly bound molecules like SAMs. The explanation of this effect remains elusive, especially for large clusters as those observed in our study. The emission of these clusters is investigated using ToF-SIMS under 15 keV Ga+ bombardment. In particular, we have measured the energy distributions (KEDs), which are informative of the physical processes of sputtering. We have probed both the influence of the intermolecular forces and the adsorbate-metal bonding on the cluster ion emission. Importantly, our KEDs revealed that a significant fraction of MmMen clusters is formed via the metastable decay of larger aggregates in the acceleration section of the spectrometer. This is the experimental evidence that another cluster formation channel has to be considered in addition to the recombination mechanisms proposed by other groups. In parallel to these experiments, we have used classical molecular dynamics (MD) simulations to model an overlayer of octanethiols on gold. A realistic potential has been used including long-range forces between the hydrocarbon chains of the alkanethiols. Our key finding concerns the emission of large clusters which were not observed under sub-keV projectile impact. Statistically, they are predominantly formed in high yield events, where many fragments and (supra)molecular species are ejected. From the microscopic viewpoint, these events mostly stem from the confinement of the projectile and recoil atom energies in a finite nanovolume of the surface. As a result of the high local energy density, molecular aggregates desorb from an overheated liquid-like region surrounding the impact point. In summary, from a combined experimental and computational study we have shown that analytical models involving linear collision cascades and recombination processes are insufficient to describe metal-thiolate cluster emission from SAMs under keV ion bombardment. The detailed MD investigation have allowed us to obtain a general picture of the emission of these aggregates in which the mechanisms at play are reminiscent of those high yields events (megaevents) with non linear effects used usually to account for large (bio)molecule desorption.

Langmuir monolayers can be employed as simple model systems to study interactions at surfaces. Such investigations are important to fields ranging from biology to materials science. Herein, several aspects of these films and their associated water structure have been examined with vibrational sum frequency spectroscopy (VSFS). This second order nonlinear optical spectroscopy is particularly well suited for simultaneous investigations of the monolayer and the associated water structure with unprecedented surface specificity. The structures of these systems were altered through the control of experimental parameters including monolayer pressure, subphase temperature, pH and ionic content. Thermodynamic information about structural changes in a fatty amine monolayer's hydrophobic region was obtained by observation of the pressure and temperature dependence of the monolayer's solid to liquid phase transition. Further studies used the coordination of divalent cations to acid monolayers to perturb the water layers nearest to the film which enabled a better understanding of the water related VSFS features from these hydrophilic interfaces. Information from both the monolayer and water structure was then combined in order to examine the role of water in mediating ion-biomaterial interactions, often expressed in terms of the Hofmeister series.

Herein are presented collective studies of amino acid-based surfactants, also known as lipoamino acids, at liquid interfaces. Chapter III describes an investigation of domain morphology of N-Stearoylglutamic acid (N-SGA) Langmuir monolayers at the air/water interface by epifluorescence microscopy. Anisotropic feather-like domains were observed in L-enantiomeric monolayers while symmetric circular domains were found in racemic N-SGA monolayers. At a surface pressure of 30 mN/m the enantiomeric domains melted at 31 ??C while the racemic domains melted at 27 ??C. This result is exactly opposite to the behavior found in bulk crystals where the racemate melts at a higher temperature. These results were explained in terms of different molecular packing and hydrogen bonding between bulk crystals and two-dimensional thin films for enantiomeric and racemic compounds. Chapter IV summarizes the investigations of hydrogen bonding in N-acyl amino acid monolayers by vibrational sum-frequency spectroscopy (VSFS). The intermolecular hydrogen bonding interaction between the adjacent molecules through amide-amide groups in N-stearoylalanine (N-SA) is characterized by an NH stretch peak at 3311 cm-1. This is the first time that the amide NH stretching signals have been detected with the VSFS technique. A similar peak was detected at 3341 cm-1on N-SGA monolayer. The higher frequency indicates that the H-bond strength is weaker due to the larger size of the glutamic acid residue. The NH stretch mode can thus be used as a fingerprint of hydrogen bonding among amide-amide groups. A peak at 3050 cm-1 due to hydrogen bonding among carboxyl groups was also resolved from the VSFS spectra. Molecular models of intermolecular hydrogen bonding were proposed.

The interactions between peptides and lipids are of fundamental importance in the functioning of numerous membrane-mediated biochemical processes including antimicrobial peptide action, hormone-receptor interactions, drug bioavailability across the blood-brain barrier and viral fusion processes. Alteration of peptide structure could be a cause of many diseases.<br> Biological membranes are complex systems, therefore simplified models may be introduced in order to understand processes occurring in nature. The lipid monolayers at the air/water interface are suitable model systems to mimic biological membranes since many parameters can be easily controlled. In the present work the lipid monolayers were used as a model membrane and their interactions with two different peptides B18 and Amyloid beta (1-40) peptide were investigated.<br> B18 is a synthetic peptide that binds to lipid membranes that leads to the membrane fusion. It was demonstrated that it adopts different structures in the aqueous solutions and in the membrane interior. It is unstructured in solutions and forms alpha-helix at the air/water interface or in the membrane bound state. The peptide has affinity to the negatively charged lipids and even can fold into beta-sheet structure in the vicinity of charged membranes at high peptide to lipid ratio. It was elucidated that in the absence of electrostatic interactions B18 does not influence on the lipid structure, whereas it provides partial liquidization of the negatively charged lipids. The understanding of mechanism of the peptide action in model system may help to develop the new type of antimicrobial peptides as well as it can shed light on the general mechanisms of peptide/membrane binding.<br> The other studied peptide - Amyloid beta (1-40) peptide, which is the major component of amyloid plaques found in the brain of patients with Alzheimer's disease. Normally the peptide is soluble and is not toxic. During aging or as a result of the disease it aggregates and shows a pronounced neurotoxicity. The peptide aggregation involves the conformational transition from a random coil or alpha-helix to beta-sheets. Recently it was demonstrated that the membrane can play a crucial role for the peptide aggregation and even more the peptide can cause the change in the cell membranes that leads to a neuron death. In the present studies the structure of the membrane bound Amyloid beta peptide was elucidated. It was found that the peptide adopts the beta-sheet structure at the air/water interface or being adsorbed on lipid monolayers, while it can form alpha-helical structure in the presence of the negatively charged vesicles. The difference between the monolayer system and the bulk system with vesicles is the peptide to lipid ratio. The peptide adopts the helical structure at low peptide to lipid ratio and folds into beta-sheet at high ratio. Apparently, Abeta peptide accumulation in the brain is concentration driven. Increasing concentration leads to a change in the lipid to peptide ratio that induces the beta-sheet formation. The negatively charged lipids can act as seeds in the plaque formation, the peptide accumulates on the membrane and when the peptide to lipid ratio increases it the peptide forms toxic beta-sheet containing aggregates. / Wechselwirkungen zwischen Peptiden und Lipiden sind von grundlegender Bedeutung für die Funktion vieler Membran-vermittelter biochemischer Prozesse wie der Wirkung von antimikrobiellen Peptiden, Hormon-Rezeptor Wechselwirkungen, Bioverfügbarkeit von Arzneistoffen durch die Blut-Hirn-Schranke und viraler Fusionsprozesse. Veränderungen in der Peptidstruktur können die Ursache für viele Erkrankungen sein.<br> Biologische Membranen sind für grundlegende physikalisch-chemische Untersuchungen von Naturprozessen zu komplexe Systeme, so dass vereinfachte Modelle für solche Studien eingesetzt werden. Eine Lipidmonoschicht an der Wasser/Luft Grenzfläche ist ein geeignetes Modellsystem für eine Membranoberfläche. Viele physikalisch-chemischen Parameter können auf einfache Weise gezielt verändert werden. In der vorliegenden Arbeit wurden Lipidmonoschichten genutzt, um Wechselwirkungen mit zwei unterschiedlichen Peptiden (B18 and Amyloid Beta (1-40) Peptid) zu untersuchen.<br> B18 ist ein oberflächenaktives synthetisches Peptid, das an Lipidmembranen bindet und zu Membranfusion führt. Es kann verschiedene Sekundärstrukturen ausbilden. So ist B18 in wässrigen Lösungen ungeordnet und bildet eine alpha-helikale Struktur an der Wasser/Luft Grenzfläche. Das Peptid hat eine große Affinität zu negativ geladenen Lipiden und kann in der Nähe von geladenen Membranoberflächen bei einem großen Peptid/Lipid Verhältnis eine Beta-Faltblatt Struktur ausbilden. Beim Fehlen elektrostatischer Wechselwirkungen hat B18 keinen Einfluss auf die Lipidstruktur. Es wirkt jedoch strukturabbauend auf anionische Lipide. Das Verständnis der Peptidwirkungen in Modellsystemen kann helfen, generelle Mechanismen von Peptide-Membran Wechselwirkungen zu verstehen und zur Entwicklung neuer antimikrobieller Peptide beizutragen.<br> Amyloid Beta (1-40) Peptid ist die Hauptkomponente von Amyloid-Plaque, das im Gehirn von Alzheimer Patienten gefunden wird. Normalerweise ist das Peptid löslich und nicht toxisch. Hohe Neurotoxizität wird bei Peptidaggregation, die eine Strukturumwandlung von ungeordnet oder alpha-helikal zu Beta-Faltblatt nach sich zieht, beobachtet. In der vorliegenden Arbeit wurde die Struktur des Membran-gebundenen Amyloid Beta (1-40) Peptids untersucht. Es zeigte sich, dass das Peptid nach Adsorption an die Wasser/Luft Grenzfläche oder an Lipidmonoschichten eine Beta-Faltblatt Struktur ausbildet. Eine alpha-helikale Sekundärstruktur wird nur bei Anwesenheit negativ geladenen Lipidvesikel gefunden. Der entscheidende Unterschied zwischen den Monoschicht- und Vesikel-Systemen ist das Peptid/Lipid Verhältnis. Die alpha-helikale Struktur wird nur bei kleinem Peptid/Lipid Verhältnis beobachtet, während bei großem eine Beta-Faltblatt Struktur auftritt. Steigende Konzentration an Amyloid Beta (1-40) Peptid führt zum Anstieg des Peptid/Lipid Verhältnisses und damit zur Ausbildung der Beta-Faltblatt Struktur. Negativ geladene Lipide können somit als Keimpunkte für die Plaquebildung fungieren.

I denna avhandling beskrivs tillverkning, karaktärisering och tillämpning av ett antal biomimetiska ytor. Biomimetik är att härma naturen och grundtanken är att titta på hur naturen löst liknande problemställningar. Två olika typer av modellsystem med inspiration från naturen har tagits fram för framtida tillämpningar inom bioanalys, biosensorer samt antifrysmaterial. Det ena typen av modellsystem innefattar fosforylerade ytor och det andra består av ytor som härmar antifrys(glyko)proteiner. Ytorna tillverkades av monolager av självorganiserande svavelorganiska molekyler och karaktäriserades före tillämpning med hjälp av ellipsometri, IR-spektroskopi, kontaktvinkelmätning och röntgenfotoelektronspektroskopi. Modellsystemen för att studera vattenfrysning på ytor inspirerades av antifrys(glyko)proteiner som bl.a. kan hittas i polarfiskar. Två modellsystem utvecklades och studerades med avseende på frysning av kondenserat vatten. Det ena designades att härma den aktiva domänen hos ett antifrysglykoproteiner (AFGP) och det andra härmade typ I antifrysproteiner (AFP I). Frysstudierna visade på signifi-kanta skillnader för AFGP-modellen jämfört med ett (OH/CH3) referenssystem med jämförbar vätbarhet, men inte för AFP Imodellen. Vattnet frös vid högre temperatur för AFGPmodellen. Modellsystemen med fosforylerade ytor inspirerades av fosforylering och biomineralisering. Två system utvecklades, ett med långa och ett med korta alkylkedjor på aminosyraanalogerna, både med och utan fosfatgrupp. En ny metod användes med skyddsgrupper på fosfaterna hos de långa analogerna innan bildandet av monolager. Skyddsgrupperna togs bort efter bildandet av monolager. Dessa monolager undersöktes också med elektrokemiska metoder och signifikant högre kapacitans observerades för de fosforylerade monolageren jämfört med de icke fosforylerade. / This thesis describes the preparation, characterization and application of a few biomimetic surfaces. Biomimetics is a modern development of the ancient Greek concept of mimesis, i.e. man-made imitation of nature. The emphasis has been on the preparation and characterization of two types of model systems with properties inspired by nature with future applications in bioanalysis, biosensors and antifreeze materials. One type of model system involves phosphorylated surfaces; the other consists of surfaces mimicking antifreeze (glyco)proteins. The surfaces were made by chemisorbing organosulfur substances to a gold surface into monomolecular layers, so called self-assembled monolayers (SAMs). The physicochemical properties of the SAMs were thoroughly characterized with null ellipsometry, contact angle goniometry, x-ray photoelectron spectroscopy and infrared spectroscopy prior to application. The work on antifreeze surfaces was inspired by the structural properties of antifreeze (glyco)proteins, which can be found in polar fish. Two model systems were developed and studied with respect to ice nucleation of condensed water layers. One was designed to mimic the active domain of antifreeze glycoproteins (AFGP) and the other mimicked type I antifreeze proteins (AFP I). Subsequent ice nucleation studies showed a significant difference between the AFGP model and a (OH/CH3) reference system displaying identical wetting properties, whereas the AFP I model was indistinguishable from the reference system. The model systems with phosphorylated surfaces were inspired from phosphorylations and biomineralization. Two systems were developed, short- and long-chained amino acid analogues, with and without a phosphate group. A novel approach with protected groups before attachment to gold were developed for the long-chained analogues. The protective groups could be removed successfully after assembly. The long-chained SAMs were evaluated with electrochemical methods and significantly higher capacitance values were observed for the phosphorylated SAMs compared to the non-phosphorylated.

I den här avhandlingen har vi studerat hur man kan göra nya tensider. En tensid är en speciell molekyl som har förmågan att lösa sig i både vatten och olja. Man kan göra följande experiment hemma: Fyll en glasburk till hälften med vatten och tillsätt en droppe matolja. Oljan bildar en droppe ovanpå vattnet, därför att vatten och olja inte är blandbara. Vatten är polärt och olja är opolärt. Om man rör om med en sked kommer oljedroppen förvisso att dela upp sig i mindre droppar, men så snart man slutar att röra kommer dessa att lägga sig på vattenytan igen. Sätt nu en droppe diskmedel till blandningen och rör om. Nu sprider sig oljedropparna mycket bättre i vattnet, och de lägger sig heller inte på vattenytan lika fort när man slutar att röra. Det här beror på att diskmedel innehåller en tensid, som har en polär och en opolär del. Den polära delen passar ihop med det polära vattnet, medan den opolära delen passar ihop med den opolära oljan. På så vis kan tensiden hjälpa till att lösa upp opolära ämnen i polära vätskor. Den aktiva delen av ett läkemedel består ofta av opolära ämnen, vilka inte löser sig i polära vätskor såsom vatten. Eftersom kroppen består till stor del av vatten måste man ändå försöka få läkemedlet vattenlösligt, för att möjliggöra transport via blodet till problemområdet. Det kan man uppnå genom att tillsätta tensider. Om läkemedel-tensidblandningen ska ges till djur eller människor får inte tensiden orsaka någon skada i kroppen. Vi har försökt framställa tensider som ska kunna användas för att just lösa läkemedel i vatten. För att kunna framställa nya tensider måste man ha kunskap i organisk syntes. Det betyder att man måste veta hur man från små intermediat (”byggstenar”) successivt kan bygga upp nya molekyler som har de önskvärda egenskaperna. Genom olika typer av organisk syntes har vi byggt upp tre nya tensidtyper, vars egenskaper vi studerat med olika mätningar. Ingen av dessa tensider lämpade sig som tillsats till läkemedel, men vårt arbete har givit mycket ny kunskap om hur framtida tensidmolkyler kan tillverkas och vilka egenskaper de får. / This thesis deals with the synthesis and characterization of new polyhydroxy surfactants. The first part describes the synthesis of three new surfactant classes, and the second part concerns the surface chemical characterization of the synthesized surfactants. A stereodivergent route for preparation of hydrophilic head groups was developed, that featured consecutive stereoselective dihydroxylations of a diene. This method provided in total four different polyhydroxylated head groups. These surfactant head groups were natural and unnatural sugar analogues, and were used for the coupling with two different hydrophobic tail groups. Another approach took advantage of a metathesis reaction and provided a polyhydroxylated compound that was coupled to 12-hydroxy stearic acid The third class of surfactants contained an amide linkage between the hydrophilic and the hydrophobic parts. The hydrophilic part consisted of two glucose units, and 12-hydroxy stearic acid was used as the hydrophobic part. The hydroxy moiety in the tail group was further functionalized as aliphatic esters, which provided in total four different surfactants. A selection of the surfactants was used to investigate the chiral discrimination in Langmuir monolayers at an air-water interface. The isotherms showed a remarkable difference in compressibility between diastereomeric surfactants and also a pronounced chiral discrimination between racemic and enantiomerically pure surfactants, favoring heterochiral discrimination. The monolayers were also investigated with Brewster angle microscopy (BAM) and grazing incidence X-ray diffraction (GIXD). It was not possible to observe any chirality dependent features from the BAM images, but the GIXD measurement supported the conclusion that heterochiral discrimination governed the intermolecular forces within the racemic monolayer. The third class of surfactants, containing an amide linkage between the glucose units and 12-hydroxy stearic acid was evaluated with respect to the CMC and the haemolytic activity. These surfactants were all haemolytic close to their respective CMC. / QC 20101015

Immobilization of different bio- and organic molecules on solid supports is fundamental within many areas of science. Sometimes, it is desirable to obtain a directed orientation of the molecule in the immobilized state. In this thesis, the copper (I) catalyzed Huisgen 1,3-dipolar cycloaddition, referred to as a “click chemistry” reaction, was explored as a means to perform directed immobilization of small molecule ligands on gold surfaces. The aim was to synthesize alkyne- and azide-terminated alkanethiols that would form well-organized self assembled monolayers (SAMs) on gold from the commercially available substances orthoethylene glycol and bromo alkanoic acid. N-(23-azido-3,6,9,12,15,18,21-heptaoxatricosyl)-n-mercaptododekanamide/hexadecaneamide (n = 12, 16) were successfully synthesized and allowed to form SAMs of different compositions to study how the differences in density of the functional groups on the surface would influence the structure of the monolayer and the click chemistry reaction. The surfaces were characterized by different optical methods: ellipsometry, contact angle goniometry and infrared reflection-absorption spectroscopy (IRAS). The click reaction was found to proceed at very high yields on all investigated surfaces. Finally, the biomolecular interaction between a ligand immobilized by click chemistry on the gold surfaces and a model protein (bovine carbonic anhydrase) was demonstrated by surface plasmon resonance using a Biacore system.

<p class=MsoNormal style='text-align:justify;text-indent:.5in;line-height:150%'><span style='mso-bidi-font-weight:bold'>M-DNA is a novel complex formed between DNA and transition metal ions under alkaline conditions.<span style='mso-spacerun:yes'>  </span>The unique properties of M-DNA were manipulated in order to rationally place metal ions at specific regions within a double-stranded DNA helix.<span style='mso-spacerun:yes'>   </span>Investigations using thermal denaturation profiles and the ethidium fluorescence assay illustrate that the pH at which M-DNA formation occurs is influenced heavily by the DNA sequence and base composition.<span style='mso-spacerun:yes'>  </span>For instance, DNA with a sequence consisting of poly[d(TG)d(CA)] is completely converted to M-DNA at pH 7.9 while DNA consisting entirely of poly[d(AT)] remains in the B-DNA conformation until a pH of 8.6 is reached.<span style='mso-spacerun:yes'>  </span>The pH at which M-DNA formation occurs is further decreased by the incorporation of 4-thiothymine (s⁴T).<span style='mso-spacerun:yes'>  </span>DNA oligomers with a mixed sequence composed of </span>half d(AT) and the other half d(TG)d(CA)<span style='mso-bidi-font-weight: bold'> showed that only 50% of the DNA is able to incorporate Zn²⁺ ions at pH 7.9.<span style='mso-spacerun:yes'>  </span>This suggests that only regions corresponding to the tracts of <span class=GramE>d(</span>TG)d(CA) are being transformed.<span style='mso-spacerun:yes'>   </span><o:p></o:p></span></p> <p class=MsoNormal style='text-align:justify;text-indent:.5in;line-height:150%'><span style='mso-fareast-language:ZH-CN'>Duplex DNA monolayers were self-assembled on gold through <span class=GramE>a</span> Au-S linkage and both B- and M-DNA conformations were studied using X-ray photoelectron spectroscopy (XPS) in order to better elucidate the location of the metal ions.<span style='mso-spacerun:yes'>  </span>The film thickness, density, elemental composition and ratios for samples were analyzed and compared.<span style='mso-spacerun:yes'>  </span>The DNA surface coverage, calculated from both XPS and electrochemical measurements, was <span class=GramE>approximately 1.2 x 10¹³molecules/cm²</span>for B-DNA.<span style='mso-spacerun:yes'>  </span>All samples showed distinct peaks for C 1s, O 1s, N 1s, P 2p and S 2p as expected for a thiol-linked DNA.<span style='mso-spacerun:yes'>  </span></span><span style='mso-bidi-font-weight: bold'>On addition of Zn²⁺ to form M-DNA the C 1s, P 2p and S 2p showed only small changes </span><span style='mso-fareast-language:ZH-CN'>while both the N 1s and O 1s spectra changed considerably.<span style='mso-spacerun:yes'>  </span>This result is consistent with Zn²⁺ interacting with oxygen on the phosphate backbone as well as replacing the imino protons of thymine (T) and guanine (G) in M-DNA.<span style='mso-spacerun:yes'>   </span>Analysis of the Zn 2p spectra also demonstrated that the concentration of Zn²⁺ present under M-DNA conditions is consistent with Zn²⁺ binding to both the phosphate backbone as well as replacing the imino protons of T or G in each base pair.<span style='mso-spacerun:yes'>  </span>After the M-DNA monolayer is washed with a buffer containing only Na⁺ the Zn²⁺ bound to the phosphate backbone is removed while the Zn²⁺ bound internally still remains. </span><span style='mso-bidi-font-weight:bold'>Variable angle x-ray photoelectron spectroscopy (VAXPS) was also used to examine monolayers consisting of mixed sequence oligomers.<span style='mso-spacerun:yes'>  </span>Preliminary results suggest that under M-DNA conditions, the zinc to phosphate ratio changes relative to the position of the <span class=GramE>d(</span>TG)d(CA) tract being at the top or bottom of the monolayer.<span style='mso-spacerun:yes'>  </span><span style='mso-spacerun:yes'> </span><o:p></o:p></span></p> <p class=MsoNormal style='text-align:justify;text-indent:.5in;line-height:150%'><span style='mso-bidi-font-weight:bold'>Electrochemistry was also used to investigate the properties of M-DNA monolayers on gold and examine how the localization of metal ions affects the resistance through the DNA monolayer.<span style='mso-spacerun:yes'>  </span>T</span>he effectiveness of using the IrCl₆^2-/3-redox couple to investigate DNA monolayers and the potential advantages of this system over the standard Fe(CN)₆^3-/4- redox couple are demonstrated.<span style='mso-spacerun:yes'>  </span>B-DNA monolayers were converted to M-DNA by incubation in buffer containing 0.4 mM Zn²⁺ at pH 8.6 and studied by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) with IrCl₆^2-/3-.<span style='mso-spacerun:yes'>  </span>^{<span style='mso-spacerun:yes'> </span>}Compared to B-DNA, M-DNA showed significant changes in CV, EIS and CA spectra.<span style='mso-spacerun:yes'>  </span>However, only small changes were observed when the monolayers were incubated in Mg²⁺at pH 8.6 or in Zn²⁺ at pH 6.0.<span style='mso-spacerun:yes'>  </span>The heterogeneous electron-transfer rate (<i style='mso-bidi-font-style:normal'>k</i>_ET) between the redox probe and the surface of a bare gold electrode was determined to be 5.7 x 10^-3 cm/s.<span style='mso-spacerun:yes'>  </span>For a B-DNA modified electrode, the <i style='mso-bidi-font-style:normal'>k</i>_ET through the monolayer was too slow to be measured.<span style='mso-spacerun:yes'>  </span>However, under M-DNA conditions, a <i style='mso-bidi-font-style:normal'>k</i>_ET of 1.5 x 10^-3 cm/s was reached.<span style='mso-spacerun:yes'>  </span>As well, the percent change in resistance to charge transfer (R_CT), measured by EIS, <span class=GramE>was</span> used to illustrate the dependence of M-DNA formation on pH.<span style='mso-spacerun:yes'>  </span>This result is consistent with Zn²⁺ ions replacing the imino protons on thymine and guanine residues.<span style='mso-spacerun:yes'>  </span>Also, at low pH values, the percent change in R_CT seems to be greater for <span class=GramE><span style='mso-bidi-font-weight:bold'>d(</span></span><span style='mso-bidi-font-weight: bold'>TG)₁₅d(CA)₁₅ compared to oligomers with mixed d(AT) and d(TG)d(CA) tracts.<span style='mso-spacerun:yes'>  </span></span>The IrCl₆^2-/3-redox couple was also effective in differentiating between single-stranded and double-stranded DNA during dehybridization and rehybridization experiments.<span style='mso-spacerun:yes'>  </span><span style='mso-bidi-font-weight:bold'><o:p></o:p></span></p>