The diploma thesis deals with the design of the floor structure of an apartment building in two structural variants. The aim of the work is to find out the internal forces, design and check in two construction variants. Finite Element Method was used for calculation internal forces using 2D model for floor slab and 3D model of building in the Dlubal RFEM 5.24. The work also includes check of masonry walls.

The subject of this final thesis is the building technological project of the library on the street of Kravi hora in the Brno. The final thesis includes a technical report, a coordination situation, a situation of the construction with wider relations with transport route links, a time schedule and financial plan of the construction, a site equipment project, a design of the main machines and mechanisms, a time schedule of the main building object, a supply plan and a plan for transport routes, a technological regulation for cast-in-place floor structure, a control and test plan, a health and safety plan at work on a construction site binding for a carcass, an itemized budget for carcass, a comparison of the solutions for realization of the cast-in-place floor structure and the technological regulation for technology of capture of rainwater for further use.

This diploma thesis solves the construction technology project of construction hotel in Frýdlant. The introduction of the thesis contains basic information about the construction of the building. The presumed design and construction process are described in a construction-technological study. A time and financial object plan is also processed for the object, the total cost of which was determined from the software BuildPower S program according to the THU. Also included in this software program was an item budget for rough construction. A detailed schedule of the construction was created in Contec. In addition, suitable machines, mechanisms and site equipment are designed for the rough construction. In my work I deal mainly with the design of earthworks, rider bracing and board piles. For these stages a technological regulations and a control and test plan were implemented. A technological regulation was also created to make a white tank on the second basement floor. For the white tank is designed a formwork system with sofware DokaCad 8. Health safety and preservation at work are also addressed.

The subject of the diploma thesis is to design a project study and a building program that would become a compromise between the requirements of the city of Brno and BUT in the area of Kraví hora in the Brno city center. The city of Brno would like to transform the area into a public park. But BUT considers it as its "family silver" because they realize its extraordinary value. Options of a constructions are really limited because of many area regulations. My proposal counts on the demolition of all existing buildings in the area, respects property area relations , protection zone, continuity with existing traffic roads, height regulation, imaginary raster of surrounding buildings, slope of terrain and orientation to the cardinal points. My suggest represents a study of five groups of objects which creating a rectangular raster. As a compromise solution, I chose the presentation and promotional areas of the individual faculties of BUT for the content of the buildings. Faculties have spaces for hobby groups for the public comprise all age groups included. I also designed the BUT Museum of History, a multimedia hall, a cafeteria, studios, a student leisure center and an observation tower with a climbing wall.

This thesis deals with the construction process of the apartment house Ponavia Park located in Brno. The thesis solves the individual realization phases of the main building phase. Building site equipment is designed for the projected construction process in three different variations. A technical report is also included in the building site. Critical points within the transport of materials and machines are also verified. A financial plan for the whole building is made as an summarizing time schedule for the apartment building. The sources for the financial plan are the figures taken from the Czech building objects classifications (JKSO). The summarizing time schedule is made in MS Projekt software and it’s designed as a Gantt diagram. A design of the main building machines and mechanisms was also made for the projected construction process. All of the machines were assessed for their respective required function on the building site. Also included in this thesis is a construction method for the reinforced concrete structures. The construction method deals with the realization process of waterproof concrete, reinforcement binding, formwork of the vertical and horizontal structures and also the process of concrete curing. The construction method is followed up by quality control and test plans for reinforced concrete structures, and a construction site safety plan that is made in the form of predicted main safety risks at the building site. For the noise load on the surrounding buildings a noise study is made. The study examines the intensity of noise in the protected outdoor space. This study was made in the Hluk+ software. The thesis also includes an item budget for the apartment house that was made in Build Power S software.

The theme of the diploma thesis is the construction technology project construction of a community center in the Czech Budejovice. The work describes the study of the main stages of technological, financial and construction schedule, itemized budget and technological prescription for performance building envelope. A substantial part of the work is to perform a technological prescription ceiling cladding structure above 1.NP, which is supplemented by technical-economic balance for the implementation of this ceiling construction, along with formwork drawings describes the optimal design of monolithic ceiling structure above 1.NP. Suitable design of the implementation process of the ceiling structure is achieved by reducing the cost of implementation of nearly 10% and shorten the length of the lease formwork system of almost 34% compared to the original assumption.

The theme of the diploma thesis is elaboration of selected parts of the construction technology project in building block of flats Hostivař. Content of this project is technological solution for realization of this project. It means working on time planning of construction, right using of human, material and machinery sources and controlling system for selected part of the building. In attachment of the diploma thesis, there are also drawings of building site equipment for different construction phases. The goal of the diploma thesis is design right and economical procedure for realization of the building, comply with the safety, quality and ecology conditions.

The subject of this diploma thesis is the elaboration of a construction technological project for the construction of an administrative building with garages in Prague. The building is located in an enclosed area in the Prague-Veleslavín district. The main subject of this thesis is the elaboration of a technical report, a coordination situation of the construction with broader relations of transport routes, a time and financial plan of construction - object, a study of implementation of main technological stages of building, a project of the site equipment, a design of main construction machines and mechanisms, a time plan of main building, a plan of material resources, a technological regulation for the implementation of monolithic ceiling structures, a quality control and testing plan for monolithic ceiling structures. The diploma thesis also includes the calculation of construction according to THU, a occupational health and safety plan, concreting economics, a noise study, a selected points LEED certification and a budget with site equipment costs.

The subject of my diploma thesis is the solution of the construction of the Hotel Karpaty located near the town of Valašské Klobouky. The thesis contains an accompanying technical report, solution of transport routes, including traffic situation, time and financial plan of construction, study of implementation of main technological stages, construction site project with division into individual stages, drawing part and construction site report, design of main working machines and mechanisms, time hotel construction plan, plan for securing material resources, including budget and staff needs chart, technological regulation of monolithic ceiling structures, control and test plan for monolithic ceiling structures, design and installation of Schüco aluminum windows, design of construction measures Hotel Karpaty according to LEED standard.

The goal of the project is behaviour and dimensioning of selected monolithic concrete structure elements. Design and assessment of the building foundation was made. Slabs of the floors are dimensioned in detail. All computations are made in accordance with Eurocode 2. Drawing documentation is part of this project.