The aim of this diploma thesis is to elaborate the project documentation of a new-built winery, in the cadastre area of Šakvice. The building has a basement and one above-ground floor. The building has a combined structural system. On the first floor is a wine-tasting room, a conference hall, a wine shop, a showroom, and an office. The wine production and technical facilities are situated in the basement. The building is based on cast-in-place plain concrete foundation strips. Vertical loadbearing structures on the first floor are design from ceramic blocks and the vertical loadbearing structures on the basement are design from cast-in-place reinforced concrete. Horizontal loadbearing structures are designed from cast-in-place reinforced concrete. The flat roof consists of a flat roof with extensive greenery. There are twenty parking spaces on the site. The designs were developed in the AutoCAD software. All structures comply with the valid standards and regulations.

The subject of my master‘s thesis is A new cultural society center building in Frýdek-Místek. The work is explained in the form of project documentation for the execution of the building containing all the requirements following the legal standards and regulations. The land is flat. It is a two-storey, basement building. The supporting system of the object is a monolithic reinforced concrete skeleton filled with ceramic blocks. Basement masonry is permanent formwork. The roof and ceiling structures are made of reinforced concrete slabs. Roofs above both of the first floors are flat green roofs, the roof above the second floor is also flat formed by river rock. The new building of the cultural society center corresponds to the town plan of the town of Frýdek-Místek. The design was influenced by the layout, static and architectural features, and energy savings.

The subject of this thesis is to create a project documentation of the design of a new office building construction in Fulnek – Jerlochovice. The building is located between residential and industrial zone. It has three aboveground levels. There is a technical backgroud, toilets, archive, rest zone for employees and two openspace offices located on the ground floor. The second floor is designed on the same basis. There are two openspace offices situated on the west side, background for company managment, toilets and day room with kitchen. The third floor is designed as conference room with kitchen and toilets. Construction system is cast-in-place concrete frame. The building is roofed with the flat roof. Foundations are made of one-stage concrete footing.

Diploma thesis solves proposal of the boarding house in Strážnice. The building is situated in the western part of Strážnice near the boat dock. Access to the pension is from the main road or on the cycling path leading along the city river. The boarding house is designed on a bed of 50 people with the possibility of a restaurant for port visitors and the public. The building has a parking space and terrace. The boarding house is two-storey with hipped roof. In the 1st floor is a restaurant with kitchen, reception with facilities for staff and smaller rooms for guests. The second floor consists of apartments and rooms. The building is brick with monolithic ceiling construction. The roof structure consists of trusses. Integral part of the landscaping with small architecture. The façade finish consists of ceramic brick cladding, scratched plaster with wooden accessories that fit into the surrounding landscape.

The subject of this diploma thesis is the desing and development of project documentation for the construction of a new building of the multifunctional house Rozkošská. Object will be located in the city of Hlavlíčkův Brod in part Rozkoš. The new biulding will be divided in to commercial space in ground floor, office space in second floor and residental area in third floor. It is three-storey multifuncional house with a warm flat roof with a typical sequence of layers based on foundation pads. The structural system is desinged reinforced concrete frame. The diploma thesis is processed with the valid standards, laws and decreens of the Czech Republic in the current version.

THIS DIPLOMA WORK IS PROJECTING A PROJECT DOCUMENTATION FOR THE CONSTRUCTION OF STUDENT DORMITORY IN BRNO. THE BUILDING IS SITUATED AT THE TECHNOLOGY PARK NEAR TO SEVERAL VUT FACULTY AND STUDENT CAMPUS. THE DESIGN CAME FROM THE LONG-TERM LACK OF ACCOMMODATION CAPACITY ON EXISTING DORMITORY IN BRNO, THE EMPHASIS WAS PUT MAINLY ON THE ACCOMMODATION CAPACITY OF THE BUILDING. THE BUILDING CONSISTS OF TWO FOUR-STOREY BLOCKS WITH A TOTAL CAPACITY OF 244 BEDS, WHICH ARE SITED ON THE 2ND TO 4TH FLOORS. A TYPICAL AND REVERSE ELEMENT IS A LIVING CELL IN WHICH CONTAINS TWO DOUBLE ROOMS - A COMMON SCHEDULE WITH DINING ROOM, A COMMON SOCIAL BACKGROUND WITH A HALL, AND TWO BALCONIES ACCESSIBLE FROM THE KITCHEN. 1. THE FLOOR FLOOR CONNECTS BOTH BLOCKS WITH A LARGE STUDY AND CORRIDOR. THE REMAINING ROOMS IN THE 1ST FLOOR ARE USED AS A TECHNICAL AND ADMINISTRATIVE FACILITY OF THE DUTY.

Master´s thesis premises designed Health centre Sadová on the level of documentary for execution of works. The building has thirteen medical equipment with facilities, pharmacy, health food store, optics and refreshment. The building is simply-shaped, with four above-ground floors and basement. The structural systém is cast-in-place concrete frame. The infill wall in basement is walled with permanent formwork blocks and the ground floors are walled with clay blocks. Floor structures are cast-in-place reinforced concrete. Roof structure is designed like flat roof. The building has thermal insulation and cladding with fibre cement board.

An analog multiplier are circuits, that are realized multiplication of two analog signals. They can be made by suitable connection (according to function) discreet parts. Nowadays there are integrated circuits in advance function, whose internal structure is made by complex of circuits with operating ampfliers and other circuits. These circuits have a very high accuracy of arithmetic operation which is mostly better than 1%. The analog multiplier are used in situation, when we need realize multiplication, division, exponentation, square root extraction and logarithmic calculation of analog signals. In the next are used in circuits for multiplication of frequency, shifting of frequency, amplitude modulation, detection phase angel of two signals with the same frequency, etc. The AD538 is a monolithic real-time computational circuit that provides precision analog multiplication, division and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input dynamic range.

Master’s thesis "Residential terraced house" is developed in the form of project documentation containing all requirements according to applicable regulations. The proposed facility is located in a quiet area of Hodonin and is detached. It is a six-storey new building with three underground and three above-ground floors. The building has 12 residential units. The structural system is designed with reinforced concrete monolithic ceilings. The building has a single ply flat roof.

The content of the master‘s thesis is processing of project documentation for administrative building in Opava, first done as a feasibility study and then as a pilot project. The object is standalone, with four floors and basement. The work also comprises the thermal technical assessment chosen constructions, the fire protection report, the accompanying report and the summary technical report.