The subject of the diploma thesis is design and processing of the design documentation for the new building in Velké Meziříčí. The building is designed as a four-storey building with a partial basement, which serves like garage for 4 cars. On the above floors there are 8 residential units. Other premises are used as a business and administrative area. The loadbearing structure is made of sand-lime bricks, which are insulated with combined thermal insulation.

The aim of the final thesis is design of boarding house and horse stables. The boarding house has two floors, partial basement and exploited attic. The building is designed as rectangle and will serve as support area for guests´accommodation. The building has saddle roof. The main material of vertical and horizontal structures is cast-in-place concrete using formwok VELOX. The second building is horse stables. The building has two floors, partial basement and partial exploited attic for storing fodder. The L-shaped building will serve as stable for eleven horses, storage of fodder and garage for agricultural equipment. The building has saddle roof with truss girders. The main material of vertical and horizontal structures is cast-in-place concrete using formwok VELOX. These buildings are designed on slightly sloping terrain from east to west.

My diploma thesis deals with project a multifunctional building. My project corresponds to the scope of documentation for the execution of construction. Building hat five floor and construction roof is green roof, single-layer flat roof. Construction systém is cast-in-place concrete frame. In basement is technical facilities and parking place. In ground floor is shop place and parking floor. In first floor is office place. In third and fourth floor are flats. Building foundations are bored cast in place pile – method CFA.

The subject of the diploma thesis is the new building of the alliative care center in Žamberk. It is a detached building, which is partly basement and has three above-ground floors. From the operating point of view, it is a medical-social facility. The facility has a range of palliative care services - a dormitory, a day hospice, a mobile hospice facility and outpatient services. Due to the type of facilities and persons using the facilities, emphasis was placed on the location of an object situated on the outskirts of the city in the area of other social and health facilities designed for long-term residence in a quiet, quiet environment with plenty of surrounding greenery. The mass of the building consists of several blocks, the shape and material solution is simple. The construction system is a monolithic reinforced concrete skeleton, coated with ceramic blocks. Several types of flat roofs are covered, 2NP is designed as a receding floor with a barrier-free terrace.

The aim of my diploma thesis is the elaboration of the project documentation for the construction of the administrative building. It is a seven-storey building with one underground and six above-ground floors. The underground floor is halfway under the terrain and used for garage parking. The loose part will be used for barrier-free entrance to the building and partly as a cafe. Above-ground floors are used as office spaces. The administrative building is designed as a monolithic reinforced concrete structure in the underground floor, the above-ground floors are designed as a column monolithic system for flexible use of office space. The static calculation will be carried out according to valid ČSN EN standards.

This master's thesis presents the design and the realization of a low noise amplifier (LNA) for the S band of radio frequency spectrum from 2.3 GHz to 2.4 GHz. This thesis is mainly focused on stability and impedance matching networks study. Ansoft Designer and ANSYS HFSS programs are used for this design to simulate the LNA. Different low noise devices are simulated in order to find the best results for the final design. Moreover, a coaxial cavity resonator is designed in the input of the LNA and works as a band pass filter. Finally, the LNA is fabricated and its properties compared with the simulation results.

The aim of the diploma thesis is composition of project documentation for construction of multifunctional building. Object is situated on the cadastral area of Třebíč in the location Na kopcích on the eastern part of city. Terain is slightly sloping. In the multifunctional bulding there are four above-ground floor and one below-ground floor. In the below-ground floor there are situated technical and storage spaces. In the first below-ground floor there are two entrances, the first one for administrative part and second one for residential part. The first and second above-ground floor is used for administrative purposes. The third and fourth above-ground floor is used for living in flats. Above part of the third above-ground floor there is roof made of extensive green roof and above the fourth above-ground floor there is roof made of a flat roof with a classical order of layers with waterproofing layer made of PCV-P. There is a lift in the part of object with flats. The vertical construction system of the building is wall-mounted, supplemented with girders and columns. The ceiling structures are made of reinforced concrete monolithic slabs. The staircase is monolithic reinforced concrete.

The subject of this diploma thesis is design documentation for implementation of the construction applied on the newly-built polyclinic in Rousínov. The polyclinic is the detached one, placed in the flat building plot with adjacent parking lot. The whole building is solving continuity on the surrounding local roads and dispersion areas. Basement of this building serves primarily as technical facilities for properly working on this new building. For example it’s about storages, utility room, boiling room, mechanical room etc. The first above-ground floor, where is situated entrance in to the building, from the southeast, is placed pharmacy, medical transport service and the first one doctor’s surgery. In the other above-ground floors are placed another doctor’s surgeries every with different specialization and in the last floor is a section for managers of polyclinic. The building is designed as a cast-in-place concrete frame with infill walls from aerated concrete. This building is based on plain concrete foundation pads and in the middle of span is shear core. Horizontal structures are solved by point-supported slabs with periphery beam and roofing is solved by warm flat roof. Whole building is insulated with contact thermal insulation from non-flammable material.

This diploma thesis deals with the design of a two-storey extension of a penzion house in Sebranice near Boskovice. The building is located on a flat terrain and is adjacent to the existing building of a country house. The building has a ballroom, new facilities for the existing building, wellness, garage, reception, meeting room, dining room and seven accommodation units for temporary accommodation for a maximum of 18 people. The vertical load-bearing structures are designed from a structural system of ceramic blocks of the HELUZ systém, the building are based on foundation strips. The ceilings and stairs are monolithic reinforced concrete. The roof is sloping, saddle, formed by a purlin system. The work contains project documentation for the construction.

This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.