The subject of the master’s thesis is the project documentation of building work for multifunctional building. The object has five floors above ground and one underground floor. The structural system of the building is a reinforced concrete skeleton. The roof of the building is flat, and the terraces are designed as vegetation. In the basement is situated parking for residents, and building technical facilities. On the first floor there is space for commercial use, two shops and a cafe. In other floors are located residential units, total of twelve.

Diploma thesis deals with the complex desing documentation newly-built hotel. The building is situated in the centre of Brno in the cadastral Brno – Trnitá. The hotel is desingned for temporary accommodation and small conferences. It is four-storey building with flat roof and without a basement. Cast-in-place reinforced concrete farme is used for structural system with locally supported slab. It used clay bloks for infill wall. The whole building is insulated external thermal insulation composite system from mineral wool. For visitors to the hotel is parking available in the south part of the land. The hotel is desingned for visitors with limited mobility and orientation.

This diploma thesis deals with constructive technological project of Polymer system centre in Zlín. Main aim of diploma thesis is working out on the rough construction with the point of view of material resources, financial plan and time plan. Thesis contents technical report, technological regulation for monolithic reinforced concrete frame, plan of lifting mechanization, construction site lay out, plan of controls and tests for quality, calculation and work schedule.

The aim of this master thesis is to prepare the project documentation for a building of a Christian centre. The building is designed for liturgical purposes, but also leisure activities and consists of two floors and a partial basement. The main parts of the building: Main hall for worship services, group of rooms for activities, small hall, tea room and a dwelling unit for the pastor. The floor plan of the building is shaped like the letter „V“, and the architectural design of the building does not interfere with the landscape. The building is set in slightly sloping terrain which forms a contrast with the opposite rising flat roof over the main hall.

The subject of this Master thesis is a project of a leisure center. The project covers building plans, specifications and includes all the requirements according to valid regulations. The project comprises of two buildings which are connected together by a corridor. The first is a two storey building and contains classrooms designed to be used for aesthetics activities, children play area, cloakrooms, toilets and offices for the managers of these buildings. The second a one storey building comprises two halls for sport activities and the rest of the area is intended to be used as a play area for children, study rooms for teachers and a tool store. The roofing of both buildings is designed as a single pitched roof made of timber ties. This project also includes heat loss with sound assessment, fire assessment and two other projects of services and structures, described in the details of these buildings.

This thesis describes a design of a travel agency headquarters building. It is a four storey building without a basement made of longitudinal cast-in-place concrete frame system. The building is roofed with non-walkable flat roof and two terraces. Two flats are located in the facility in addition to offices, a café, a shop, a tour saleroom, a small storage, a departure waiting room and other facilities providing quality operation of a travel agency. The land on which the building is located is designed as a car park and parking areas for smooth departure of the travel agency clients.

This master´s thesis solves the apartment building with – bakeshop. The are five floors in the apartment building. The building hasn´t any basement. There are fifteen flats in the building and one flat is barrier-free. The apartment building is designed in passive standard, it´s caused by the orientation to cardinal points, compact shape, extreme thicknesses of insulations, orientation of windows to the south-west and to the south-east, but also thanks to the climatic area.

This diploma thesis deals with a new built office building in Brno-Husovice. The building is situated in a gap site on the street Dukelská třída. The building has four aboveground floors and underground garages. The ground floor is divided into relaxation area and a commercial section with five shopping units. The second and the third floor are designed as a variable office space. The engine room for ventilation is situated on the fourth floor. Construction system is cast-in-place concrete frame. The building is roofed with the green roofs. Foundations are made of large diameter drilled piles.

The subject of this diploma thesis is elaboration of project of a residential house. The object is divided into 3 buildings objects. The building has five floors. In first above-ground there is a mass garage for 36 cars. In others grounds there are 24 residential units. In each ground is for each apartment separate lockable cellar. Object is predominantly covered with flat roofs. The staircase area is covered with sloping roof.

The subject of this thesis is to create a Project documentation of the design of the New development, a restaurant with a guesthouse, in the cadastral area Mařatice, city Uherské Hradiště. The object is designed as a standalone barrier-free 2 story building. The first floor above ground contains a restaurant, capacity 52 persons, to which a terrace with capacity of 28 persons is attached. Apart from the aforementioned there is also a support area for the restaurant, technical facilities and the owner's office. On the second floor there are 6 rooms for rent, incliding one barrier-free and a lounge for guests. The object foundation base are foundation pads and grade beams made of reinforced concrete. The load-bearing structure is a cast-in-place monolithic skelet made of reinforced concrete. The infill structures are designed as a light building envelope from the company Novatop. Part of the object has a flat green roof, the other part is a mono-pitched roof on which photovoltaic and photothermic panels are placed. The drawing is processed with help of AutoCAD software. The visuals in programs ArchiCAD and Artlantis.