The objectives of the diploma thesis are selected parts of construction technology project – apartment house „Panoráma nad přehradou“. The diploma thesis contains operational procedure of manufacture of bored piles and foundation slab (use of waterproof concrete) and their applicable control and test plans. Another part of the diploma thesis are time and economic plans, concept of site equipment, study of main technological phase realization and block plan drawing. Item budget, OHSAS, operational procedur for manufacture of RC cast-in-place floor slabs and assigned drawings were done within another task.

This diploma thesis deals with the project documentation of the reconstruction of a mixed-use building in Radnice, which is designed as a four-floor. In the first floor are premises of a post office a pharmacy. The second and the third floor is designed for the management of the city and there is a public library in the fourth floor. The structural system is a cast-in-place concrete frame with the precast floor slabs and the gabled roof. The building is located in a terraced house on a square.

Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.

This diploma thesis deals with design of newly - built office building in the cadastral area Považská Bystrica, part Centrum. The building is situated in a block of buildings. The building has five above-ground floors. The ground floor is divided into relaxation zone and a commercial area with six shopping units. The second and the third floor are designed as an open space office. There are lecture halls on the fourth floor. The mechanical room of ventilation is situated on the fifth floor. The building is designed as a cast-in-place reinforced concrete frame. The building is roofed with warm flat roof.

The final thesis is focused on a design of an apartment house and processing of the design documentation. Designed building is situated on the periphery of the town Chrudim in the locality of the housing estate Na Větrníku. It’s a detached house with five floors and a basement. Building has a rectangular plan with dimensions 30,92 × 17,17 m. The foundation of the building is designed as a combination of piles and strips. The vertical constructions will be made of the clay blocks. The floor structures are designed as cast-in-place reinforced concrete floors. The apartment house has a saddle roof with a slope 15°. There are 25 apartments in the building and the mass garages for 15 cars, which are situated in the basement. The garages will serve to the residents of the house.

The final thesis is focused on a new building of School of arts in Valašské Meziříčí. The object has three floors, it has a basement and two above-ground floors witch a flat roof. A loadbearing structure is made of skeleton - reinforced concrete monolithic columns and reinforced concrete monolithic floor slabs. Filling masonry is made of ceramic tiles. Object has thermal insulation by mineral wool. Detailed solution of final thesis deals with the solution of main building School of arts, where are the schoolrooms and technical facilities. In the other parts of the object are a staff facilities, multipurpose hall, café and underground garage.

The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up

This diploma thesis medical house in Hustopece deals with a design and project documentation for construction health facilities in Hustopece. Object is used to provide a daily patient care. There are nine private medical facilities of various specializations, pharmacy and optics. Object with its proposal allows wheelchair access. This is a hasnot four-storey building. Structure consists of monolithic reinforced concrete skeleton with stiffening walls, footings based and passports. internal unsound are designed from the drywall. Building roof is flat, edging attic.

The subject of this diploma thesis is the design of a new library and the elaboration of project documentation for the construction. The library is located on the outskirts of the village Jiříkovice on a flat plot. The building is designed as a detached building with an underground floor and two above-ground floors. The individual floors are connected by staircases and a lift. The above-ground part of the building contains library, office part and café. The underground part of the building contains archive, stores and technical facilities. The structural system of a building is designed from cast-in-place concrete frame with filling from ceramic blocks. Horizontal structural system is from cast-in-place reinforced concrete point-supported slabs. Part of facade is from wood and part is with contact thermal insulation system with mineral wool insulation. Roof construction is designed as flat green roof.

This diploma thesis deals with the design of an office building and the processing of project documentation for the construction. The office building is located in the Židenice in Brno, next to the Brno Židenice train station. This is a detached partly basement four-storey building with a flat roof. The underground floor serves primarily as a collective garage for 25 vehicles including parking spaces in the local stacking system. On the ground floor of the building there are three rentable spaces for retail with storage facilities and sanitary facilities for employees. The other of the building is used for administrative purposes. On the second above ground floor there are cell offices, on the third and fourth floors above ground the office spaces are rather as a open space. The construction system of the building is frameral with infill masonry made of ceramic fittings, the foundations are made of reinforced concrete slab and walls made of waterproof concrete. The foundations under the non-basement part are made of reinforced concrete foundation footing. Next to the office building, there are also eight parking spaces for shop visitors.