The main goal of this research was to determine the effectiveness of saturated fat replacement by means of a canola oil oleogel, termed an “organogel”, using ethyl cellulose (EC, 10 cP) as the gelator and sorbitan monostearate (SMS) as a plasticizer. All-beef frankfurters and pork breakfast sausages were used and instrumental tests performed to determine effectiveness were light microscopy, texture profile analysis, Warner-Bratzler shear force, cook loss and smokehouse yield. A trained sensory analysis panel scored for hardness, juiciness, oiliness, and the presence of off flavours. Replacing beef fat (BF) with canola oil (CO) in frankfurters produced a product that was significantly harder (P < 0.05). The gelling of the canola oil lowered the TPA hardness values. Cohesiveness, chewiness and gumminess values were statistically similar to the BF control. Minor changes in L*, a* and b* values were observed, with the organogel frankfurters being lighter than the BF control. Sensory analysis scores showed that 8,10 & 12% EC frankfurters were significantly less hard than the CO control. / Ontario Ministry of Agriculture, Food & Rural Affairs (OMAFRA)

No description available.

O trabalho tem como objetivo determinar a influencia da concentração de monoestearato de sorbitano, componente do núcleo oleoso das nanocápsulas, na cinética de liberação do éster etílico de indometacina a partir de nanocápsulas de poli(ε-caprolactona) (PCL). Com este propósito o éster etílico de indometacina foi associado a cada sistema e sua hidrólise alcalina foi realizada para simular uma condição sink. A velocidade de consumo do éster etílico de indometacina foi menor conforme o aumento da concentração do monoestearato de sorbitano. O tempo de meia-vida do consumo do éster etílico de indometacina associado as nanocápsulas foi relacionado com a concentração do monoestearato de sorbitano, sendo maior, enquanto maior a concentração do monoestearato. O mecanismo de liberação foi determinado como sendo transporte anômalo. Foi observada uma relação linear direta entre o aumento da concentração do monoestearato de sorbitano e a concentração de partículas nas suspensões de nanocápsulas (R2=0,9711). Mistura de outras nanopartículas que não as nanocápsulas, foram observadas e caracterizadas. O fluxo difusional do éster a partir das nanocápsulas foi determinado e diminuiu significativamente com o aumento da concentração do monoestearato, devido a mudanças na viscosidade do núcleo das nanocápsulas com o aumento da concentração do monoestearato de sorbitano. Por fim, os resultados demonstraram que o principal fator que contribui para o retardo no tempo para o consumo do éster etílico de indometacina é a relação direta entre a concentração do monoestearato de sorbitano e a permeabilidade das nanocápsulas (R=0,9894). / The aim of this work was to evaluate the influence of the sorbitan monoestearate concentration, one of the components of the oil core of the nanocapsules, in the release kinetic of the indomethacin ethyl ester-loaded poli(ε-caprolactone) nanocapsules. In this way, the indomethacin ethyl ester was entrapped within each system and its alkaline hydrolysis was carried out to simulate a sink condition. The rate for the indomethacin ethyl ester consumption decreased with the increase in sorbitan monostearate concentrations. The indomethacin ethyl ester half-live was related to the sorbitan monostearate concentration, increasing as the sorbitan monostearate concentration increased. The drug release mechanism was determined as anomalous transport. Linear correlations were obtained between the increase in the sorbitan monostearate concentration and the particles concentration in the suspensions (R2 = 0.9711). Mixture of different nanoparticles that are not nanocapsules were observed by density gradient and characterized. The indomethacin ethyl ester fluxes from the nanocapsules were determined and presented a decrease of the flux as the sorbitan monostearate concentration increased. This result was related to changes in the oil core viscosity caused by the variation of the sorbitan monostearate concentration. Finally, the results demonstrated that the main factor that contributes for the delaying in the time for the indometahcin ethyl ester consumption was the direct relation between the sorbitan monostearate concentration and the apparent permeability of the nanocapsules (R2 = 0.9894).

O trabalho tem como objetivo determinar a influencia da concentração de monoestearato de sorbitano, componente do núcleo oleoso das nanocápsulas, na cinética de liberação do éster etílico de indometacina a partir de nanocápsulas de poli(ε-caprolactona) (PCL). Com este propósito o éster etílico de indometacina foi associado a cada sistema e sua hidrólise alcalina foi realizada para simular uma condição sink. A velocidade de consumo do éster etílico de indometacina foi menor conforme o aumento da concentração do monoestearato de sorbitano. O tempo de meia-vida do consumo do éster etílico de indometacina associado as nanocápsulas foi relacionado com a concentração do monoestearato de sorbitano, sendo maior, enquanto maior a concentração do monoestearato. O mecanismo de liberação foi determinado como sendo transporte anômalo. Foi observada uma relação linear direta entre o aumento da concentração do monoestearato de sorbitano e a concentração de partículas nas suspensões de nanocápsulas (R2=0,9711). Mistura de outras nanopartículas que não as nanocápsulas, foram observadas e caracterizadas. O fluxo difusional do éster a partir das nanocápsulas foi determinado e diminuiu significativamente com o aumento da concentração do monoestearato, devido a mudanças na viscosidade do núcleo das nanocápsulas com o aumento da concentração do monoestearato de sorbitano. Por fim, os resultados demonstraram que o principal fator que contribui para o retardo no tempo para o consumo do éster etílico de indometacina é a relação direta entre a concentração do monoestearato de sorbitano e a permeabilidade das nanocápsulas (R=0,9894). / The aim of this work was to evaluate the influence of the sorbitan monoestearate concentration, one of the components of the oil core of the nanocapsules, in the release kinetic of the indomethacin ethyl ester-loaded poli(ε-caprolactone) nanocapsules. In this way, the indomethacin ethyl ester was entrapped within each system and its alkaline hydrolysis was carried out to simulate a sink condition. The rate for the indomethacin ethyl ester consumption decreased with the increase in sorbitan monostearate concentrations. The indomethacin ethyl ester half-live was related to the sorbitan monostearate concentration, increasing as the sorbitan monostearate concentration increased. The drug release mechanism was determined as anomalous transport. Linear correlations were obtained between the increase in the sorbitan monostearate concentration and the particles concentration in the suspensions (R2 = 0.9711). Mixture of different nanoparticles that are not nanocapsules were observed by density gradient and characterized. The indomethacin ethyl ester fluxes from the nanocapsules were determined and presented a decrease of the flux as the sorbitan monostearate concentration increased. This result was related to changes in the oil core viscosity caused by the variation of the sorbitan monostearate concentration. Finally, the results demonstrated that the main factor that contributes for the delaying in the time for the indometahcin ethyl ester consumption was the direct relation between the sorbitan monostearate concentration and the apparent permeability of the nanocapsules (R2 = 0.9894).

O trabalho tem como objetivo determinar a influencia da concentração de monoestearato de sorbitano, componente do núcleo oleoso das nanocápsulas, na cinética de liberação do éster etílico de indometacina a partir de nanocápsulas de poli(ε-caprolactona) (PCL). Com este propósito o éster etílico de indometacina foi associado a cada sistema e sua hidrólise alcalina foi realizada para simular uma condição sink. A velocidade de consumo do éster etílico de indometacina foi menor conforme o aumento da concentração do monoestearato de sorbitano. O tempo de meia-vida do consumo do éster etílico de indometacina associado as nanocápsulas foi relacionado com a concentração do monoestearato de sorbitano, sendo maior, enquanto maior a concentração do monoestearato. O mecanismo de liberação foi determinado como sendo transporte anômalo. Foi observada uma relação linear direta entre o aumento da concentração do monoestearato de sorbitano e a concentração de partículas nas suspensões de nanocápsulas (R2=0,9711). Mistura de outras nanopartículas que não as nanocápsulas, foram observadas e caracterizadas. O fluxo difusional do éster a partir das nanocápsulas foi determinado e diminuiu significativamente com o aumento da concentração do monoestearato, devido a mudanças na viscosidade do núcleo das nanocápsulas com o aumento da concentração do monoestearato de sorbitano. Por fim, os resultados demonstraram que o principal fator que contribui para o retardo no tempo para o consumo do éster etílico de indometacina é a relação direta entre a concentração do monoestearato de sorbitano e a permeabilidade das nanocápsulas (R=0,9894). / The aim of this work was to evaluate the influence of the sorbitan monoestearate concentration, one of the components of the oil core of the nanocapsules, in the release kinetic of the indomethacin ethyl ester-loaded poli(ε-caprolactone) nanocapsules. In this way, the indomethacin ethyl ester was entrapped within each system and its alkaline hydrolysis was carried out to simulate a sink condition. The rate for the indomethacin ethyl ester consumption decreased with the increase in sorbitan monostearate concentrations. The indomethacin ethyl ester half-live was related to the sorbitan monostearate concentration, increasing as the sorbitan monostearate concentration increased. The drug release mechanism was determined as anomalous transport. Linear correlations were obtained between the increase in the sorbitan monostearate concentration and the particles concentration in the suspensions (R2 = 0.9711). Mixture of different nanoparticles that are not nanocapsules were observed by density gradient and characterized. The indomethacin ethyl ester fluxes from the nanocapsules were determined and presented a decrease of the flux as the sorbitan monostearate concentration increased. This result was related to changes in the oil core viscosity caused by the variation of the sorbitan monostearate concentration. Finally, the results demonstrated that the main factor that contributes for the delaying in the time for the indometahcin ethyl ester consumption was the direct relation between the sorbitan monostearate concentration and the apparent permeability of the nanocapsules (R2 = 0.9894).

Rigid poly[hydroxyethyl acrylate-co-poly(ethylene glycol) diacrylate] (Poly(HEA-co-PEGDA) monoliths were synthesized inside 75-µm i.d. capillaries by one-step UV-initiated copolymerization using methanol and ethyl ether as porogens. The optimized monolithic column was evaluated for hydrophobic interaction chromatography (HIC) of standard proteins. Six proteins were separated within 20 min with high resolution using a 20 min elution gradient, resulting in a peak capacity of 54. The performance of this monolithic column for HIC was comparable or superior to the performance of columns packed with small particles. Monoliths synthesized solely from PEGDA were also found to show excellent performance in HIC of proteins. Continuing efforts showed that rigid monoliths could be synthesized from PEGDA or poly(ethylene glycol) dimethacrylates (PEGDMA) containing different ethylene glycol chain lengths for HIC of proteins. Effects of PEG chain length, bi-porogen ratio and reaction temperature on monolith morphology and back pressure were investigated. Monoliths prepared from PEGDA 258 were found to provide the best chromatographic performance with respect to peak capacity and resolution. An optimized PEGDA 258 monolithic column was able to separate proteins using a 20-min elution gradient with a peak capacity of 62. The preparation of these in situ polymerized single-monomer monolithic columns was highly reproducible. The single-monomer synthesis approach clearly improves column-to-column reproducibility.The highly crosslinked monolith networks resulting from single crosslinking monomers were found to enhance the surface area of the monolith and concentrations of mesopores. Thus, monolithic columns were developed from four additional crosslinking monomers, i.e., bisphenol A dimethacrylate (BADMA), bisphenol A ethoxylate diacrylate (BAEDA, EO/phenol = 2 or 4) and pentaerythritol diacrylate monostearate (PDAM) for RPLC of small molecules. Gradient elution of alkyl benzenes and alkyl parabens was achieved with high resolution using all monolithic columns. Porogen selection for the BADMA and PDAM was investigated in detail with the intention of obtaining data that could possiblly lead to a rational method for porogen selection.