Spelling suggestions: "subject:"mountain pipe beetle""
21 |
Biophysical and Climate Analysis of the Mountain Pine Beetle (Dendroctonus ponderosae) Infestations in the Crown of the Continent, 1962 to 2014Garza, Mario Nicholas 22 February 2017 (has links)
Mountain pine beetles (Dendroctonus ponderosae) are native insects that have decimated millions of hectares of mature pine (Pinaceae) forests in western North America. The purpose of this study is to investigate biophysical and climatic correlates of Mountain Pine Beetle (MPB) insect outbreaks in the Crown of the Continent Ecosystem (CCE) from 1962 to 2014 using Aerial Detection Survey (ADS) and climate data. Specific objectives were: 1) to develop statistical models to determine how selected biophysical correlates (slope, aspect, elevation, and latitude) and 2) to understand how local and global climate variables relate to the extent of the MPB infestations in the CCE, and 3) to contextualize the results of the models with historical climate data. Overall, the major findings of this study are: 1) despite its limitations, the ADS data seems suitable for analysis of beetle damage with respect to climate and topographic factors, on a regional scale, 2) there appears to be a link between local biophysical factors and winter precipitation and TPA within the CCE, and 3) a combination of a negative-phase PDO and La Niña is important in forecasting a decline in MPB spread, during a given year. This study is the first, to our knowledge, to explore spatio-temporal patterns of MPB outbreaks using biophysical factors, and both local and global climate variables, over a fifty-year timespan in the CCE. In the future, additional geospatial analyses may enable a landscape assessment of factors contributing to variability of MPB infestation and damage as this insect continues to spread. / Master of Science
|
22 |
Physiological, ecological and environmental factors that predispose trees, stands and landscapes to infestation by tree-killing Dendroctonus beetlesGoodsman, Devin W. Unknown Date
No description available.
|
23 |
The Red Top Model: A Landscape-Scale Integrodifference Equation Model of the Mountain Pine Beetle-Lodgepole Pine Forest InteractionHeavilin, Justin 01 May 2007 (has links)
Under normative conditions the mountain pine beetle (Dendroctonus ponderosae Hopkins) has played a regulating role in healthy lodgepole pine (Pinus contorta) forests. However, recently eruptive outbreaks that result from large pine beetle populations have destroyed vast tracts of valuable forest. The outbreaks in North America have received a great deal of attention from both the timber industry and government agencies as well as biologists and ecologists.
In this dissertation we develop a landscape-scaled integrodifference equation model describing the mountain pine beetle and its effect on a lodgepole pine forest. The model is built upon a stage-structured model of a healthy lodgepole pine forest with the addition of beetle pressure in the form of an infected tree class. These infected trees are produced by successful beetle attack, modelled by response functions. Different response functions reflect different probabilities for various densities. This feature of the model allows us to test hypotheses regarding density-dependent beetle attacks.
To capture the spatial aspect of beetle dispersal from infected trees we employ dispersal kernels. These provide a probabilistic model for finding given beetle densities at some distance from infected trees. Just as varied response functions model different attack dynamics, the choice of kernel can model different dispersal behavior. The modular nature of the Red Top Model yields multiple model candidates. These models allow discrimination between broad possibilities at the land scape scale: whether or not beetles are subject to a threshold effect at the lands cape scale and whether or not host selection is random or directed. We fit the model using estimating functions to two distinct types of data: aerial damage survey data and remote sensing imagery. Having constructed multiple models, we introduce a novel model selection methodology for spatial models based on facial recognition technology.
Because the regions and years of aerial damage survey and remote sensing data in the Sawtooth National Recreation Area overlap, we can compare the results from data sets to address the question of whether remote sensing data actually provides insight to the system that coarser scale but less expensive and more readily available aerial damage survey data does not.
|
24 |
Lodgepole Pine Susceptibility Rating of Mountain Pine Beetle Through the Use of a Density Management DiagramAnhold, John Albert 01 May 1986 (has links)
Ninety-four unmanaged lodgepole pine stands were examined to evaluate the relationship between stand density and susceptibility to mountain pine beetle attack. Sample included stands from a broad geographical range in the western United States.
Beetle population trends were not significantly related to variation in stand density as measured by stand density index (SDI). The percentage of trees killed per acre by the mountain pine beetle in stands with greater than eighty percent lodgepole pine did vary significantly with changes in SDI. From these data three SDI zones were identified: 1) stands with SDI's of less than 125 showed low potential for attack, 2) stands between 125 and 250 SDI showed much greater levels of tree mortality, gradually decreasing toward the 250 SDI, 3) tree mortality decreased in stands as density increased beyond the 250 SDI value.
|
25 |
Influence of Mountain Pine Beetle on Fuels, Foliar Fuel Moisture Content, and Litter and Volatile Terpenes in Whitebark PineToone, Chelsea 01 December 2013 (has links)
Mountain pine beetle (Dendroctonus ponderosae Hopkins) has caused extensive tree mortality in whitebark pine (Pinus albicaulis Engelm) forests. Previous studies conducted in various conifer forests have shown that fine surface fuels are significantly altered during a bark beetle outbreak. Bark beetle activity in conifer stands has also been shown to alter foliar fuel moisture content and chemistry over the course of the bark beetle rotation.The objective of this study was to evaluate changes to fine surface fuels, foliar fuel moisture and chemistry and litter chemistry in and under whitebark pine trees infested by mountain pine beetle. Fuels were measured beneath green (healthy) trees compared to red (two years since initial MPB attack with 50% or greater needles remaining) and gray (greater than two years since attack with between 15% and 45% needles remaining) trees. Foliar moisture content was measured in four mountain pine beetle crown condition classes: green-uninfested, green-infested (current year’s attack), yellow (last year’s attack), and red. Total terpene content was analyzed in whitebark pine needle litter and volatile terpenes were collected and analyzed from green, green-infested, yellow, and red trees.Significant differences were found in litter depths under green, red, and graytrees. Duff depths were significantly less beneath green trees than red and gray trees. One hour and ten hour fuels were more influenced by diameter and crown size than beetle crown condition classes. Foliar fuel moisture content dramatically decreased from green-infested to the red beetle crown condition class. No differences were detected in shrub and forb biomass between green, red, and gray trees. Green-infested trees had significantly lower foliar fuel moisture than green trees and by late in the season showed fuel moisture levels similar to red trees which had the lowest fuel moisture content. Litter beneath red trees contained large amounts of terpenes, including compounds known to increase foliage flammability that remain in the litter throughout the fire season. Total terpene content emitted from red foliage is greater than green-infested or yellow foliage.
|
26 |
Induced monoterpene responses in jack pine: defence against jack pine budworm and a fungal associate of the mountain pine beetleColgan, Lindsay Jessica Unknown Date
No description available.
|
27 |
Ecology of understory and below-ground communities in lodgepole pine forests under changing disturbance regimesMcIntosh, Anne C. S. Unknown Date
No description available.
|
28 |
Impact of Mountain Pine Beetle Attack on Water Balance of Lodgepole Pine Forests in AlbertaPina Poujol, Pablo Cesar Unknown Date
No description available.
|
29 |
Development of Bio-based Phenol Formaldehyde Resol Resins Using Mountain Pine Beetle Infested Lodgepole Pine BarksZhao, Yong 13 August 2013 (has links)
Phenol formaldehyde (PF) resol resins have long been used widely as wood adhesives due to their excellent bonding performance, water resistance and durability. With the growing concern for fossil fuel depletion and climate change, there is a strong interest in exploring renewable biomass materials as substitutes for petroleum-based feedstock. Bark, rich in phenolic compounds, has demonstrated potential to partially substitute phenol in synthesizing bio-based PF resins.
In this study, acid-catalyzed phenol liquefaction and alkaline extraction were used to convert mountain pine beetle (MPB; Dendroctonus ponderosae) infested lodgepole pine (Pinus contorta) barks to phenol substitutes, liquefied bark and bark extractives. Two types of bio-based phenol formaldehyde (PF) resol resins, namely liquefied bark-PF resin and bark extractive-PF resins, were then synthesized and characterized.
It was found that acid-catalyzed phenol liquefaction and alkaline extraction were effective conversion methods to obtain phenol substitute with the maximum yield of 85% and 68%, respectively. The bio-based PF resol resins had higher molecular weights, higher polydispersity indices, shorter gel times, and faster curing rates than the lab synthesized control PF resin without the bark components. Based on the lap-shear tests, the bio-based PF resol resins exhibited comparable wet and dry bonding strength to lab PF resin and commercial PF resin. The post-curing thermal stability of the bio-based PF resins was similar to the lab control PF resin.
The liquid-state 13C nuclear magnetic resonance (NMR) study revealed significant influences on the resin structures by the inclusion of the bark components. Methylene ether bridges, which were absent in the lab PF resin, were found in the bio-based PF resins. The bark components favored the formation of para-ortho methylene linkages in the bio-based bark extractive-PF resins. The liquefied bark-PF resin showed a higher ratio of para-para/ortho-para methylene link (-CH2-), a higher unsubstituted/substituted hydrogen (-H/-CH2OH) ratio and a higher methylol/methylene (-CH2OH/-CH2-) ratio than the bark extractive-PF resin. Both tannin components of bark alkaline extractives and phenolated barks contributed to the acceleration of the curing rate of the bio-based resins.
This research demonstrated the promise of the bio-based PF resins containing either bark alkaline extractives or liquefied barks as environmentally friendly alternatives to PF adhesives derived solely from fossil fuel based phenol and proposed a novel higher value-added application of the largely available barks from the mountain pine beetle-infested lodgepole pine trees.
|
30 |
Development of Bio-based Phenol Formaldehyde Resol Resins Using Mountain Pine Beetle Infested Lodgepole Pine BarksZhao, Yong 13 August 2013 (has links)
Phenol formaldehyde (PF) resol resins have long been used widely as wood adhesives due to their excellent bonding performance, water resistance and durability. With the growing concern for fossil fuel depletion and climate change, there is a strong interest in exploring renewable biomass materials as substitutes for petroleum-based feedstock. Bark, rich in phenolic compounds, has demonstrated potential to partially substitute phenol in synthesizing bio-based PF resins.
In this study, acid-catalyzed phenol liquefaction and alkaline extraction were used to convert mountain pine beetle (MPB; Dendroctonus ponderosae) infested lodgepole pine (Pinus contorta) barks to phenol substitutes, liquefied bark and bark extractives. Two types of bio-based phenol formaldehyde (PF) resol resins, namely liquefied bark-PF resin and bark extractive-PF resins, were then synthesized and characterized.
It was found that acid-catalyzed phenol liquefaction and alkaline extraction were effective conversion methods to obtain phenol substitute with the maximum yield of 85% and 68%, respectively. The bio-based PF resol resins had higher molecular weights, higher polydispersity indices, shorter gel times, and faster curing rates than the lab synthesized control PF resin without the bark components. Based on the lap-shear tests, the bio-based PF resol resins exhibited comparable wet and dry bonding strength to lab PF resin and commercial PF resin. The post-curing thermal stability of the bio-based PF resins was similar to the lab control PF resin.
The liquid-state 13C nuclear magnetic resonance (NMR) study revealed significant influences on the resin structures by the inclusion of the bark components. Methylene ether bridges, which were absent in the lab PF resin, were found in the bio-based PF resins. The bark components favored the formation of para-ortho methylene linkages in the bio-based bark extractive-PF resins. The liquefied bark-PF resin showed a higher ratio of para-para/ortho-para methylene link (-CH2-), a higher unsubstituted/substituted hydrogen (-H/-CH2OH) ratio and a higher methylol/methylene (-CH2OH/-CH2-) ratio than the bark extractive-PF resin. Both tannin components of bark alkaline extractives and phenolated barks contributed to the acceleration of the curing rate of the bio-based resins.
This research demonstrated the promise of the bio-based PF resins containing either bark alkaline extractives or liquefied barks as environmentally friendly alternatives to PF adhesives derived solely from fossil fuel based phenol and proposed a novel higher value-added application of the largely available barks from the mountain pine beetle-infested lodgepole pine trees.
|
Page generated in 0.086 seconds