Synthetic diamond thin films have potential for fabricating high-temperature semiconducting and optical devices because of its extraordinary properties. In this work, a microwave plasma chemical vapor deposition system has been setup. A two-steps deposition process will be applied for the growth of boron-doped diamond on silicon and on porous silicon. The effects of temperature, microwave power and of doping concentration of B2O3 have been studied by varying the growth parameters. The doping source of B2O3 solved in C2H5OH is applied with carrying gas of Ar. To vary the concentration of boron with the flow of Ar is controlled mixing into a reaction gas of CH4 and H2 mixture. Polycrystalline diamond thin films are examined by Raman, XRD and FTIR. In the SEM photograph a nano-wires structure has been found for higher doping of B2O3. A higher temperature the growth rate of the boron-doped diamond films will increase and the shape of crystallites will tend to polycrystalline. The diamond growth is in multi steps and the mechanism of deposition will change when the boron-doped diamond film grows up to a critical thickness. In this work a smooth diamond film was successfully grown on porous silicon without the step of nucleation.

Oxygen and Nitrogen containing compounds are of utmost importance due to their interesting and diverse biological activities. The construction of the C-O and C–N bonds is of significance as it opens avenues for the introduction of ether and amine linkages in organic molecules. Despite significant advancements in this field, the construction of C-O and C–N bonds is still a major challenge for organic chemists, due to the involvement of harsh reaction conditions or the use of expensive catalysts or ligands in many cases. Thus, it is a challenge to develop alternative, milder, cheaper and more reproducible methodologies for the construction of these types of bonds. Herein, we introduce a new efficient ligand free catalytic system for C-O and C-N bond formation reactions.

Magnetic nanoscale devices have shown great promise in both research and industry. Magnetic nanostructures have potential for non-volatile data storage applications, reconfigurable logic devices, biomedical devices and many more. The S-state magnetic element is one of the promising structures for non-volatile data storage applications and reconfigurable logic devices. It is a single-layer logic element that can be integrated in magnetoresistive structures. We present a detailed micromagnetic analysis of the geometrical parameter space in which the logic operation is carried out. The influence of imperfections, such as sidewall roughness and roundness of the edge is investigated. Magnetic nanowires are highly attractive materials that has potential for applications in ultrahigh magnetic recording, logic operation devices, and micromagnetic and spintronic sensors. To utilize applications, manipulation and assembly of nanowires into ordered structures is needed. Magnetic self-alignment is a facile technique for assembling nanowires into hierarchical structures. In my thesis, I focus on synthesizing and assembling nickel nanowires. The magnetic behaviour of a single nickel nanowire with 200~nm diameter is investigated in micromagnetic simulations. Nickel nanowires with Au caps at the ends were synthesized by electrochemical deposition into nanopores in alumina templates. One-dimensional alignment, which forms chains and two-dimensional alignment, which forms T-junctions as well as cross-junctions are demonstrated. Attempts to achieve three-dimensional alignment were not successful yet. I will discuss strategies to improve the alignment process.

Magnetic nanoscale devices have shown great promise in both research and industry. Magnetic nanostructures have potential for non-volatile data storage applications, reconfigurable logic devices, biomedical devices and many more. The S-state magnetic element is one of the promising structures for non-volatile data storage applications and reconfigurable logic devices. It is a single-layer logic element that can be integrated in magnetoresistive structures. We present a detailed micromagnetic analysis of the geometrical parameter space in which the logic operation is carried out. The influence of imperfections, such as sidewall roughness and roundness of the edge is investigated. Magnetic nanowires are highly attractive materials that has potential for applications in ultrahigh magnetic recording, logic operation devices, and micromagnetic and spintronic sensors. To utilize applications, manipulation and assembly of nanowires into ordered structures is needed. Magnetic self-alignment is a facile technique for assembling nanowires into hierarchical structures. In my thesis, I focus on synthesizing and assembling nickel nanowires. The magnetic behaviour of a single nickel nanowire with 200~nm diameter is investigated in micromagnetic simulations. Nickel nanowires with Au caps at the ends were synthesized by electrochemical deposition into nanopores in alumina templates. One-dimensional alignment, which forms chains and two-dimensional alignment, which forms T-junctions as well as cross-junctions are demonstrated. Attempts to achieve three-dimensional alignment were not successful yet. I will discuss strategies to improve the alignment process.

The application of nanowires (NWs) in solar cells (SCs) is of great interest due to their new promising aspects established in nanoelectronics. Semiconductors associated with plasmonic metal nanoparticles (NPs) such as Silver (Ag), Gold (Au) and Copper (Cu), show enhanced performance in solid state light absorbing SCs owing to plasmonic characteristic of noble metal NPs. Plasmonic NPs presented a significant role in development of visible light harvesting for many applications such as photocatalytic materials, photodynamic in Surface Enhanced Raman Spectroscopy (SERS) and photovoltaics (PVs). Integration of plasmonic NPs in semiconductor materials have opened the routes to expand new PV systems with high efficiency light absorption. In this project, we introduce the synthesis ZnO and TiO2 NWs used as N-type semiconducting substrates and various methods for isolating plasmonic metal NPs, which are later deposited on the semiconducting substrates. Vertically aligned ZnO and TiO2 NWs arrays were grown on the fluorine-doped tin oxide (FTO) conductive glass substrates via hydrothermal method at low temperature and the plasmonic NPs were synthesized by wet chemistry procedures and finally decorated on the NW films by using electrophoretic deposition.  The impact of metal NPs loaded on the ZnO and TiO2 NWs substrates was studied by means of UV-vis spectroscopy and Photoluminescence (PL) spectroscopy. The absorbance spectra of individual NPs were recorded. Remarkably, the reflectance spectra of produced samples presented an enhancement in light absorption of the substrates after uptake of NPs on the ZnO and TiO2 NWs. The optical properties of the as grown ZnO NWs films decorated with Ag NPs (I) in direct contact with substrate and (II) in presence of an Al2O3 insulating spacer layer have been investigated. Both systems exhibited an enhancement in the UV band-edge emission from the ZnO when excited at 325 nm. In contrast, the broad bend defect emission of the samples did not have a significant change compare to bare ZnO substrates. The observed results suggested that the ZnO and TiO2 NWs decorated with plasmonic nanoparticles can boost the optical properties of MOs NWs substrates and hence effectively enhance the separation of photoexcited electron-hole pairs and photo-conversion applications.

Au cours de cette thèse on étude deux des plus populaires systèmes de nano-échelle, nano fil et points quantiques (quantum dots), dans le cadre d'une approximation basé sur des premiers principes. Afin d'atteindre cet objectif, nous avons utilisé et développé des théories plus sophistiquées qui nous ont permis d'avoir un meilleur aperçu de la façon dont les systèmes se comportent. Un aspect commun qui limite ces deux types de systèmes (nano fil et points quantiques) est la souplesse de contrôler les propriétés électroniques et optiques. Cette accordabilité des propriétés électroniques et optiques les dote d'un grand intérêt technologique, et elle est la raison de sa popularité / In this thesis we studied two of the most popular nano-scale systems, nano-wires and quantum dots, via a first-principles approach. In order to achieve this objective we have used and developed state-of-the-art theories that allowed us to have a greater insight into the the way this systems behave. One common aspect that bounds this two class of systems (nano-wires and quantum dots) is the flexibility to control their electronic and optical properties. This tunability of their electronic and optical properties, endows them of great technological interest, and is the reason behind their popularity

This thesis reports transport in ultrathin single crystalline nanowires of gold (∼ 2nm). These nanowires were fabricated using an oriented attachment process whereby nanoparticles of appropriate dimensions join in a linear fashion to form long and stable wires. The main motivation was to study the role of electron-electron interactions on the transport mechanism in case of a metallic system, as one approaches dimensions closer to the Fermi wavelength. The study forms the first of its kind in a simple metallic system of this dimension. Indeed, several new features have been obtained in this regard: Chapter 4 reports a breakdown of Fermi liquid state in such a system opening up possibilities of exotic states constituted by a strongly correlated Tomonaga-Luttinger liquid. We report consistent scaling of current-voltage curves, characteristic of such a phase and even resonant tunneling in such structures. The study reports the first observation of a correlated electron liquid in a metal, which has been observed only in semiconductors and polymer wires till date. Chapter 5 discusses the possibility of tuning the transport mechanism in these wires via a controlled change in the growth process. We show that using appropriate growth mechanisms, we can have a localized ground state as well, where variable range hopping is the dominant transport mechanism. Possibility of structural transitions in ultrathin wires is a field that has garnered considerable interest due to simulations. We present a highly sensitive tool in the form of electrical noise and its higher order statistics that can act as a detector of structural transitions. This has been thoroughly studied in case of conventional shape memory systems in Chapter 6. Preliminary noise studies on the nanowires have been reported in Chapter 7.

ZnO nanowires were grown using carbothermal reduction and convective vapor phase transport in a tube furnace. Si <100> substrates that were 20 mm x 76.2 mm were sputter coated with 2 nm to 50 nm gold which formed nanoparticles on the order of 50 nm in diameter through a process of Ostwald ripening upon being heated. Growth temperatures were varied from 800ºC to 1000ºC, flow rates were varied from 24 sccm to 3300 sccm, and growth durations were varied from 8 minutes to 5 hours. Vapor phase Zn, CO, and CO2, produced by carbothermal reduction and suspended in an Ar atmosphere, were flowed over the Si substrates. The Au nanoparticles formed an eutectic alloy with Zn, causing them to become liquid nanodroplets which catalyzed vapor-liquid-solid nanowire growth. The nanowires were also synthesized by self-catalyzing vapor-solid growth in some cases. Using the tube furnace never resulted in more than 50% of the substrate being covered by nanowires. It was found that a bench-top furnace could achieve nearly 100% nanowire coverage by placing the 20 mm x 76.2 mm sample face down in a quartz boat less than 2 mm above the source powder. This was because minimizing the distance between the sample and the source powder was critical to achieve macroscopically uniform growth consistently. / text