No description available.

No description available.

The probability of recombination of photogenerated electron hole pairs in crystalline silicon is governed by the density of surface defect states and the density of charge carriers. Depositions of intrinsic hydrogenated amorphous silicon (a-Si:H) in dc saddle field (DCSF) PECVD system and hydrogenated amorphous silicon nitride (SiNx) in rf PECVD system forms a dual layer stack on c-Si, which results in an excellent passivation of the surface and an anti-reflection coating. Response Surface Methodology is used in this work to optimize the deposition conditions of SiNx. Optimization of the response surface function yielded deposition conditions that materialized in a surface recombination velocity of less than 4cm/s. The BACH (Back Amorphous Crystalline silicon Heterojunction) cell concept makes use of this dual layer a-Si:H/SiNx stack to form a high efficiency photovoltaic device. The high quality passivating structure can result in the BACH solar cell device with more than 20% conversion efficiency.

Several nanomaterials systems, both inorganic and organic in nature, have been extensively investigated by a number of characterization techniques including atomic force microscopy (AFM), electron microscopy, Fourier transform infrared spectroscopy (FTIR), and energy dispersive x-ray spectroscopy (EDX). The first system consists of boron nitride nanotubes (BNNTs) synthesized via two different methods. The first method, silica-assisted catalytic chemical vapour deposition (SA-CVD), produced boron nitride nanotubes with different morphologies depending on the synthesis temperature. The second method, growth vapour trapping chemical vapour deposition (GVT-CVD), produced multiwall boron nitride nanotubes (MWBNNTs). The bending modulus of individual MWBNNTs was determined using an AFM three-point bending technique, and was found to be diameter-dependent due to the presence of shear effects. The second type of nanomaterial investigated is the biomineralized calcareous shell of the serpulid Hydroides dianthus. This material was found to be an inorganic-organic composite material composed of two different morphologies of CaCO3, collagen, and carboxylated and sulphated polysaccharides. The organic components were demonstrated to mediate the mineralization of CaCO3 in vitro. The final system studied is the proteinaceous cement of the barnacle Amphibalanus amphitrite. The secondary structure of the protein components was investigated via FTIR, revealing the presence of β-sheet conformation, and nanoscale rod-shaped structures within the cement were identified as β-sheet containing amyloid fibrils via chemical staining. These rod-shaped structures exhibited a stiffer nature compared with other structures in the adhesive, as measured by AFM nanoindentation.

The probability of recombination of photogenerated electron hole pairs in crystalline silicon is governed by the density of surface defect states and the density of charge carriers. Depositions of intrinsic hydrogenated amorphous silicon (a-Si:H) in dc saddle field (DCSF) PECVD system and hydrogenated amorphous silicon nitride (SiNx) in rf PECVD system forms a dual layer stack on c-Si, which results in an excellent passivation of the surface and an anti-reflection coating. Response Surface Methodology is used in this work to optimize the deposition conditions of SiNx. Optimization of the response surface function yielded deposition conditions that materialized in a surface recombination velocity of less than 4cm/s. The BACH (Back Amorphous Crystalline silicon Heterojunction) cell concept makes use of this dual layer a-Si:H/SiNx stack to form a high efficiency photovoltaic device. The high quality passivating structure can result in the BACH solar cell device with more than 20% conversion efficiency.

The ability to manipulate material response to dynamical processes depends on the extent of understanding of transport properties and their variation with chemical and structural features in materials. In this perspective, current work focuses on the thermal and electronic transport behavior of technologically important bulk and nanomaterials. Strontium titanate is a potential thermoelectric material due to its large Seebeck coefficient. Here, first principles electronic band structure and Boltzmann transport calculations are employed in studying the thermoelectric properties of this material in doped and deformed states. The calculations verified that excessive carrier concentrations are needed for this material to be used in thermoelectric applications. Carbon- and boron nitride-based nanomaterials also offer new opportunities in many applications from thermoelectrics to fast heat removers. For these materials, molecular dynamics calculations are used to evaluate lattice thermal transport. To do this, first, an energy moment term is reformulated for periodic boundary conditions and tested to calculate thermal conductivity from Einstein relation in various systems. The influences of the structural details (size, dimensionality) and defects (vacancies, Stone-Wales defects, edge roughness, isotopic disorder) on the thermal conductivity of C and BN nanostructures are explored. It is observed that single vacancies scatter phonons stronger than other type of defects due to unsatisfied bonds in their structure. In pristine states, BN nanostructures have 4-6 times lower thermal conductivity compared to C counterparts. The reason of this observation is investigated on the basis of phonon group velocities, life times and heat capacities. The calculations show that both phonon group velocities and life times are smaller in BN systems. Quantum corrections are also discussed for these classical simulations. The chemical and structural diversity that could be attained by mixing hexagonal boron nitride and graphene provide further avenues for tuning thermal and electronic properties. In this work, the thermal conductivity of hybrid graphene/hexagonal-BN structures: stripe superlattices and BN (graphene) dots embedded in graphene (BN) are studied. The largest reduction in thermal conductivity is observed at 50% chemical mixture in dot superlattices. The dot radius appears to have little effect on the magnitude of reduction around large concentrations while smaller dots are more influential at dilute systems.

Total hip replacement is a common orthopedic surgery today with a population with an increasing life expectancy and a more active lifestyle. Most implants have a life expectancy of 10 years or longer, however after 25 years one out of four implants has been revised. This means that the risk of a secondary surgery is high for young patients. In many cases the reason for revision is the formation of nanometer to micrometer sized particles that activate the immune system to resorb bone.   The implants today usually consist of a femoral head of a cobalt chromium alloy and a cup of polyethylene. Replacing these materials with a cobalt chromium alloy with a silicon nitride coating is hoped to generate less and smaller wear particles that will not activate the immune system to resorb bone. This study compares wear particles from three different silicon nitride coatings with wear particles from polyethylene and a cobalt chromium alloy. The first was a standard coating, the second had a layered structure and the third had a nitrogen content gradient.   This study uses a reciprocating motion with an alumina ball that slides against a sample of cobalt chromium with a silicon nitride coating in a serum solution to generate wear particles. The particles are then analyzed with a scanning electron microscope. In order to separate the particles from the serum solution two different methods were used. The first one used hydrochloric acid and the second used the enzyme proteinase K. Apart from the particles the wear tracks were investigated with vertical scanning interferometry and the adhesion was studied with scratch tests and light microscopy.   The results show that the wear particles do not differ between the coatings. All coatings show a high wear volume, which is believed to be a consequence of the material combination, movement pattern or surface roughness of the counter surface. In conclusion the test set up generates particles of a relevant size and both methods for serum digestion were successful.

Thesis (Ph. D.)--West Virginia University, 2007. / Title from document title page. Document formatted into pages; contains xvi, 145 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 142-145).

Thesis (Ph.D.) -- McMaster University, 1998. / Includes bibliographical references (leaves 186-196). Also available via World Wide Web.

Thesis (M.S.)--Ohio University, November, 2001. / Title from PDF t.p.