No description available.

In the doctoral thesis, the bi-layer ceramic bodies with core-shell geometry were prepared by thermoplastic co-extrusion method and for these composite bodies the mechanical properties were studied. For study of co-extrusion and mechanical properties were designed two composite systems. First system ZTA-A combined the dense core ZTA (zirconia-toughened alumina) and the dense shell Al2O3. Second system ZST-Z consisted of porous core and dense shell made from ZrO2 for both cases. In the thesis, the rheology of ceramic thermoplastic suspensions and their mutual influence during co-extrusion was studied. Subsequently, the debinding process and sintering were studied, and based on the optimization of all process steps were obtained defect-free bodies with core-shell geometry. The mechanical properties (elastic modulus, hardness and bending strength) were determined for sintered bodies. To estimate the stress path in the core shell bodies loaded in bending, the relationship considering different elastic moduli of the core and the shell was used. For bodies of ZTA-A system was increased the strength in comparison with monolithic bodies of the individual components. Thus, bodies with high surface hardness of shell from Al2O3 and moreover having high fracture strength in bending were obtained. The effective elastic modulus was decreased for bodies of ZST-Z system up to 25 % in comparison with the elastic modulus of dense monolithic samples. The same effective modulus of elasticity was possible to achieve with core-shell bodies while maintaining significantly higher fracture strength than monolithic porous bodies or pipes.

Fluorinated polymers are niche macromolecules that play an essential role in modern life. The special properties of fluorine, including among others, a large electronegativity (ca 3.98), low polarisability, small van der Waal’s radius (135 pm) and the strong C-F bond (ca 485 kJ · mol−1), impart unique properties to organofluorine compounds. Flu-oropolymers exhibit a combination of desirable traits, including high thermal stability, low coefficient of friction, chemical inertness, oleo- and hydrophobicity, and low surface tension. Among the fluoropolymers, polyvinylidene fluoride (PVDF), and copolymers of vinylidene fluoride (VDF) and hexafluoropropylene (HFP), have found applications in the coatings industry as the binder in exterior coatings. The chemical inertness of poly(VDF-co-HFP) copolymer, however, prevents disper-sion of pigments into the coating and also inhibits adhesion of the coating onto substrates. An acrylic modifier polymer is typically added to the poly(VDF-co-HFP) copolymer to improve the dispersion of pigments and the adhesion of the coating. This acrylic copoly-mer is physically blended with the poly(VDF-co-HFP) copolymer on a macromolecular scale (i.e. it forms a thermodynamically miscible blend). The loading of acrylic copolymer in commercial PVDF coatings is often in the range of 20 to 30 % by weight of polymer solids. Typically, copolymers of methyl methacrylate, ethyl acrylate and methacrylic esters are employed. Alternative strategies to overcome the adhesion problem include, among others, chem-ical modification of the surface of the fluoropolymer film. This can be achieved by graft copolymerisation or core shell emulsion polymerisation. These methods are used to funcionalise the polymer chains, while maintaining the desirable properties of the parent polymer. Due to environmental regulations, industry focus has shifted towards develop-ing coatings with a low volatile organic compound (VOC) content. Aqueous, low VOC, air-drying coatings can be formulated directly from the acrylic modified fluoropolymer (AMF) latex and have superior properties to solvent based, high VOC, air-dry coatings. Their advantages include low viscosities, reduced flammability, reduced odour and easy application using conventional equipment. A large portion of the aqueous coatings are sold into the architectural market with over 70 % of architectural paints used in the United States being classified as aqueous. Arkema Inc. has developed a commercial aqueous fluoropolymer latex using the method of seeded emulsion polymerisation. VDF and HFP monomers are randomly copolymerised via emulsion polymerisation. This poly(VDF-co-HFP) copolymer may be used as the seed material in a core-shell polymerisation using acrylic monomers. Kato et al. [49] discloses the preparation of an AMF formulation for poly(VDF-co-HFP) copoly-mer. Preliminary testing of membrane textiles coated with such formulations showed that the AMF coatings degrade under UV irradiation more rapidly than is is expected for poly(VDF-co-HFP) copolymer. The patent indicates that the nature of the product formed by the emulsion polymerisation is not well understood and the product my be either a graft copolymer of a core-shell system. The aim of this research reported in this dissertation was to shed light on the nature of the final product, and to verify the claims made in the above-mentioned patent. Various acrylic monomers were copolymerised via seeded emulsion polymerisation us-ing commercial poly(VDF-co-HFP) copolymer as the seed material. The concentration and the ratios of the monomers were varied according to the formulation guidelines in Kato et al.[49]. ATR-FTIR spectroscopy and19F NMR spectroscopy was used to de-termine the microstructure of the resultant latexes. ATR-FTIR spectra confirmed the presence of C=C and C=O bonds in latexes. This indicates that unreacted acrylic com-ponents are present. The ATR-FTIR spectra of the films indicated the disappearance of the C=C bonds from the latex, which indicates that the monomers are evaporated easily from the latexes during film formation. The 19F NMR spectra confirmed that no modi-fication of the poly(VDF-co-HFP) copolymer backbone took place during the reactions. The particle size distribution graphs showed an increase particle sizes and this suggested that some self polymerisation of the monomer occurred. The viscosity of the latexes were lower compared to the due to the experiments being conducted under dilution. The flow characteristics of the poly(VDF-co-HFP) copolymer was also influenced with some reactions yielding shear thickening latexes as compared to the shear thinning poly(VDF-co-HFP) copolymerc. The reactions also yielded latexes which displayed lower and higher surface tensions than the poly(VDF-co-HFP) copolymer. Therefore, the conclusion may be drawn from this work that core-shell formation occurred during the emulsion copolymerisation, as opposed to grafting of the monomer onto the poly(VDF-co-HFP) copolymer backbone. The claims made in the literature could not be substantiated; in particluar, the reported improvements in film forming ability were not realised. No commercially useful advantage exists for the emulsion copolymerisation of poly(VDF-co-HFP) copolymer with acrylic monomers over the solution blending of poly(VDF-co-HFP) copolymer with acrylic copolymers. / Dissertation (MEng)--University of Pretoria, 2019. / Chemical Engineering / MEng / Unrestricted

Philosophiae Doctor - PhD / The application of porous materials into industrial hydrogen (H2) storage systems is based on their use in combination with high-pressure cylinders. The processing of metal-organic frameworks (MOF) powders into shaped forms is therefore imperative in order to counteract the adverse effects of poor packing of powders in cylinders. The fabrication of shaped MOFs has, however, been shown to be accompanied by compromised properties such as surface areas, gravimetric and volumetric H2 capacities, and also the working/deliverable H2 capacities in comparison to MOF powders.

Nanotechnology as a field has the potential to answer some of the major challenges that mankind faces in regards to environmental sustainability, energy generation and health care. Though, solutions to these concerns can not necessarily rely on our current knowhow. Instead, it is reasonable to expect that humanity must adapt and learn to develop new materials and methods to overcome the adversities that we are facing. This master thesis has involved developing novel materials, serving as a small step in the continuous march towards a bright future where this is possible. More specifically, this work sought to combine mesoporous magnesium carbonate with various metal-organic frameworks to utilize the beneficial aspects from each of these constituents. The ambition was that these could be joined to render combined micro-/mesoporous core-shell structures, with high surface areas and many active sites whilst maintaining a good permeability. Numerous different synthesis routes were developed and explored in the pursuit of viable routes to design novel materials with potential future applications within for instance drug delivery, water harvesting from air and gas adsorption. Coreshell structures of the hydrophilic mesoporous magnesium carbonate covered with the hydrophobic zeolitic imidazole framework ZIF-8 was successfully synthesized for the first time, and practical studies demonstrated a dramatically enhanced water stability, which is perceived to have an impact on further research on these materials. ZIF-67 was also combined with mesoporous magnesium carbonate in a similar manner. Further, Mg-MOF-74 was grown directly from mesoporous magnesium carbonate, where the latter acted as a partially self-sacrificing template, with the aim of rendering a porous hierarchical structure with contributions from the micro- and mesoporous ranges. The outcomes of all these syntheses were characterized using several analyzing methods such as scanning electron microscopy, X-ray diffraction, energy dispersive spectroscopy and nitrogen sorption analysis.

No description available.

No description available.

Conventional primary Li/CFx batteries employ graphite and polyvinylidene fluoride additives in the cathodes. These additives usher in some un-desired side-effects, such as lower battery capacities (mAh/g) and smaller current densities (mA/g). An innovative pretreatment was developed in this research in which CFx was subject to a “solvated electron” reduction to obtain a thin layer graphitic carbon coating on the CFx particle surfaces. Resistivity tests revealed that these partially reduced CFx particles have a higher conductivity at comparable graphitic carbon contents. Electrochemical discharge reactions demonstrated that batteries made from the reduced CFx were superior to the conventional batteries with higher current densities and higher capacities achieved. Impedance spectroscopy (EIS) studies found out that the reduced CFx particles have smaller cell reaction resistances, smaller double layer/intercalation capacitances and smaller mass transport resistances. It appears that use of reduced CFx has the potential to replace the conventional CFx plus additives as a cathode material in Li/CFx batteries.

<p>    </p> <p>Surface functionalization of metallic nanoparticles is an attractive route to tailor the ensemble geometry and redox properties of active sites in heterogeneous catalysts. However, it is challenging to generate well-defined interfaces through conventional impregnation and one-pot colloidal synthesis methods. In this work, we utilize ligand exchange reactions for post synthetic surface modification of colloidal nanoparticles to generate unique core-shell and surface alloy structures. We use halometallate and metal chalcogenide complexes to create surface sites that are active for electrocatalytic hydrogen evolution reaction (HER). </p> <p>We synthesize a self-limiting monolayer of metal chalcogenides on colloidal Au nanoparticles through biphasic ligand exchange reaction between ammonium tetrathiomolybdate (NH₄)₂MoS₄ complex and Au nanoparticles. Through a combination of spectroscopy techniques and computational methods, we show that strong Au-S interactions introduce electronic and geometric distortion to the geometry and bond metrics of MoS₄^2-complex. Moreover, proximal MoS₄ units adsorbed on the Au surface interlink to form small MoSx oligomers with highly active bridging disulfide sites. Consequently, these core-shell AuMoS₄ nanoparticles exhibit significantly higher HER activity than MoS₄^2- supported on non-interacting carbon supports under highly acidic electrolyte conditions. Although post catalysis characterization reveals partial hydrolysis of surface adsorbed MoSx species, stable HER activity under bulk electrolysis condition indicates that active sites remain persistent. </p> <p>In an effort to extend these ligand exchange reactions to create metal/metal interfaces on other coinage metal nanoparticles such as Ag, we design metal-ligand coordination complexes to mitigate undesired galvanic replacement reactions. By varying the strength and number of coordinating ligands, we fine-tune the redox potential of oxidized noble metal precursors and confine the deposition of noble metals to a few surface layers of the Ag nanoparticles. We utilize organic amine and phosphine ligands to generate Ag@AgM core-shell nanoparticles, where M = Pd, Pt, and Au. Surface alloy or pure metal shells of Pd and Pt on Ag nanoparticles generated through this ligand-based strategy exhibited high precious metal atom utilization in electrocatalytic hydrogen evolution reaction. </p>

No description available.