Um aktuelle naturwissenschaftliche Forschung und neue Technologien in den allgemeinbildenden Unterricht einzubringen, müssen Lehramtsstudierende der Physik und Chemie an der Technischen Universität Dresden Betriebspraktika in Forschungseinrichtungen und Wirtschaftsunternehmen absolvieren. Zu diesem Zweck wird das Betriebspraktikum fachdidaktisch vor- und nachbereitet werden. In dieser Arbeit wird die Nachbereitungsphase zur Verbindung des Betriebspraktikums mit dem Unterricht empirisch erforscht, da bisher fachdidaktische Erkenntnisse über genau diese Phase fehlen. Dazu verfassen die Lehramtsstudierenden einen Praktikumsbericht sowie einen populärwissenschaftlichen Zeitungsartikel und bewerten inwiefern die Arbeitsinhalte für den Unterricht geeignet sind. Das Ergebnis der Arbeit ist ein Katalog von Problemen und Einstellungen, welche die Lehramtsstudierenden in der Nachbereitungsphase bei der didaktischen Rekonstruktion der beobachteten Arbeitsinhalte haben. Die Probleme und Einstellungen sind Ausgangspunkt für die konzeptionelle Gestaltung der Nachbereitungsphase. Es zeigt sich, dass die Einstellungen der Studierenden die Durchführung des Betriebspraktikums und den späteren Unterricht maßgeblich beeinflussen. Die Ergebnisse werden vorgestellt und diskutiert sowie Empfehlungen für die Lehrerausbildung abgeleitet.

O Poli(ácido láctico) (PLA) é um polímero biodegradável, biocompatível e biorreabsorvível proveniente de fontes renováveis. Constitui uma excelente alternativa sustentável para os polímeros provenientes de petróleo, atualmente dominantes no mercado industrial. Porém, apresenta baixas ductilidade e tenacidade como principais limitações mecânicas. Um dos métodos mais utilizados para modificar essas propriedades é a mistura mecânica do PLA com polímeros flexíveis, como a poli(ε-caprolactona) (PCL). Entretanto, o alto desempenho mecânico de blendas PLA/PCL é difícil de ser atingido devido à imiscibilidade dos polímeros. A melhoria de propriedades, neste caso, só é conseguida por meio de compatibilização. Este trabalho visa avaliar o efeito compatibilizante do copolímero tribloco de baixo peso molecular derivado de ε-caprolactona e tetrametileno éter glicol disponível comercialmente em blendas imiscíveis de PLA com PCL. Blendas binárias e ternárias foram preparadas por mistura mecânica no estado fundido via processo de extrusão em rosca simples. O teor de PLA nas blendas variou em 75, 50 e 25% (% em massa) e a concentração do copolímero em 0, 1,5, 3 e 5% (% em massa). A avaliação morfológica e o comportamento térmico e mecânico das blendas PLA/PCL foram realizados por microscopia eletrônica de varredura (MEV), calorimetria exploratória diferencial (DSC), análise térmica dinâmico-mecânica (DMTA) e ensaios mecânicos de tração, flexão e impacto Izod. O efeito compatibilizante do copolímero foi mais bem observado nas blendas com 75% (% em massa) de PLA, enquanto que nas blendas com 50% e 25% (% em massa) de PLA esse efeito não foi tão evidente. Os resultados obtidos no ensaio de tração mostraram que com o aumento do teor de compatibilizante, a tensão no escoamento, a tensão na ruptura e o módulo elástico das blendas com 75% (% em massa) de PLA se mantiveram praticamente constantes, enquanto que a deformação na ruptura evoluiu de 20% na blenda com 1,5% (% em massa) de copolímero para 84% na blenda com 5% (% em massa) de copolímero. As análises morfológicas indicaram que o copolímero em bloco agiu na interface PLA/PCL, melhorando sua adesão. Esse resultado foi reforçado pelas análises térmicas, onde foi constatado que as Tg\'s e Tm\'s do PLA e do PCL nas blendas não apresentaram alterações, o que indica que o copolímero encontra-se na região interfacial da blenda. A resistência ao impacto Izod com entalhe, propriedade mecânica utilizada nesse trabalho como uma medida da tenacidade, da blenda PLA75C5 alcançou 42 J/m, valor significativamente superior ao determinado para o PLA puro, por volta de 28 J/m. Esses resultados mostram claramente que o copolímero tribloco derivado de ε-caprolactona e tetrametileno éter glicol é um eficiente compatibilizante para blendas PLA/PCL. / The Poly (lactic acid) (PLA) is a biodegradable, biocompatible and bioabsorbable polymer derived from renewable sources. It is an excellent sustainable alternative to polymers derived from oil, currently dominating the industry. However, PLA has low ductility and poor toughness as main mechanical limitations. Mechanical mixing of PLA with flexible polymers, such as poly (ε-caprolactone) (PCL), is one of the most used methods to modify these properties. However, a high mechanical performance of PLA/PCL blends is difficult to achieve due to the immiscibility of the polymers. The improvement of properties in this case is achieved only by compatibilization. This study aims to evaluate compatibilizer effect of a low molecular weight tri-block copolymer derived from ε-caprolactone and tetramethylene ether glycol, commercially available, on immiscible blends of PLA with PCL. Binary and ternary blends were prepared by mechanical blending in melt state through a single screw extrusion. The content of PLA in the blends ranged in 75, 50 and 25 wt% and the concentration of copolymer in 0, 1.5, 3 and 5 wt%. The morphological evaluation and the thermal and mechanical behavior of PLA/PCL blends were performed by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and tensile test, flexural and Izod impact. The compatibilizer effect of the copolymer was more clearly observed in the blends with 75 wt% PLA, whereas in blends with 50 wt% to 25 wt% of PLA this effect was not so evident. The results of the mechanical tests showed that with the increase of the compatibilizer content, the yield stress, the stress at break and the elastic modulus of the blends with 75% (wt%) remained practically constant, while the elongation at break evolved from 20% in the blend with 1.5 wt% of copolymer to 84% in the blend to with 5 wt% of copolymer. Morphological analysis indicated that the block copolymer acted in the PLA/PCL interface, improving adhesion. This results were reinforced by thermal analysis, where it was found that the Tg and Tm of PLA and PCL in the blends showed no change, indicating that the copolymer is in the interfacial region of the blend. The Izod impact strength (Notched Izod), mechanical properties used in this work as a measure of toughness, of the blend PLA75C5 reached 42 J/m, significantly higher than the determined for pure PLA, about 28 J/m. These results clearly show that the triblock copolymer derived from ε-caprolactone and tetramethylene ether glycol is a good compatibilizer for blends PLA/PCL because it acts at the interfacial region, promoting the adhesion between the phases.

The thesis deals with the numerical modeling of nonreactive and nonlinearly sorbing solutes in groundwater and analysis of the effect of heterogeneity resulting from spatial variation of physical and chemical parameters on the transport of solutes. For this purpose, a hy­brid flux corrected transport (FCT) and central difference method based on operator-split approach is developed for advection-dispersion solute transport equation. The advective transport is solved using the FCT technique, while the dispersive transport is solved using a conventional, fully implicit, finite difference scheme. Three FCT methods are developed and extension to multidimensional cases are discussed. The FCT models developed are anlaysed using test problems possessing analyt­ical solutions for one and two dimensional cases, while analysing advection and dispersion dominated transport situations. Different initial and boundary conditions, which mimic the laboratory and field situations are analysed in order to study numerical dispersion, peak cliping and grid orientation. The developed models are tested to study their relative merits and weaknesses for various grid Peclet and Courant numbers. It is observed from the one dimensional results that all the FCT models perform well for continuous solute sources under varying degrees of Courant number restriction. For sharp solute pulses FCT1 and FCT3 methods fail to simulate the fronts for advection dominated situations even for mod­erate Courant numbers. All the FCT models can be extended to multidimensions using a dimensional-split approach while FCT3 can be made fully multidimensional. It is observed that a dimensional-split approach allows use of higher Courant numbers while tracking the fronts accurately for the cases studied. The capability of the FCT2 model is demonstrated in handling situations where the flow is not aligned along the grid direction. It is observed that FCT2 method is devoid of grid orientation error, which is a common problem for many numerical methods based on Cartesian co-ordinate system. The hybrid FCT2 numerical model which is observed to perform better among the three FCT models is extended to model transport of sorbing solutes. The present study analyses the case of nonlinear sorption with a view to extend the model for any reactive transport situation wherein the chemical reactions are nonlinear in nature. A two step approach is adopted in the present study for coupling the partial differential equation gov­erning the transport and the nonlinear algebraic equation governing the equilibrium sorp­tion. The suitability of explicit-implicit (EI - form) formulation for obtaining accurate solution coupling the transport equation with the nonlinear algebraic equation solved using a Newton-Raphson method is demonstrated. The performance of the numerical model is tested for a range of Peclet numbers for modelling self-sharpening and self-smearing con­centration profiles resulting from nonlinear sorption. It is observed that FCT2 model based on this formulation simulates the fronts quite accurately for both advection and dispersion dominated situations. The delay in the solute mobility and additional dispersion are anal­ysed varying the statistical parameters characterising the heterogeneity namely, correlation scale and variance during the transport of solutes and comparisons are drawn with invariant, cases. The impact of dispersion during the heterogeneous transport is discussed.

O Poli(ácido láctico) (PLA) é um polímero biodegradável, biocompatível e biorreabsorvível proveniente de fontes renováveis. Constitui uma excelente alternativa sustentável para os polímeros provenientes de petróleo, atualmente dominantes no mercado industrial. Porém, apresenta baixas ductilidade e tenacidade como principais limitações mecânicas. Um dos métodos mais utilizados para modificar essas propriedades é a mistura mecânica do PLA com polímeros flexíveis, como a poli(ε-caprolactona) (PCL). Entretanto, o alto desempenho mecânico de blendas PLA/PCL é difícil de ser atingido devido à imiscibilidade dos polímeros. A melhoria de propriedades, neste caso, só é conseguida por meio de compatibilização. Este trabalho visa avaliar o efeito compatibilizante do copolímero tribloco de baixo peso molecular derivado de ε-caprolactona e tetrametileno éter glicol disponível comercialmente em blendas imiscíveis de PLA com PCL. Blendas binárias e ternárias foram preparadas por mistura mecânica no estado fundido via processo de extrusão em rosca simples. O teor de PLA nas blendas variou em 75, 50 e 25% (% em massa) e a concentração do copolímero em 0, 1,5, 3 e 5% (% em massa). A avaliação morfológica e o comportamento térmico e mecânico das blendas PLA/PCL foram realizados por microscopia eletrônica de varredura (MEV), calorimetria exploratória diferencial (DSC), análise térmica dinâmico-mecânica (DMTA) e ensaios mecânicos de tração, flexão e impacto Izod. O efeito compatibilizante do copolímero foi mais bem observado nas blendas com 75% (% em massa) de PLA, enquanto que nas blendas com 50% e 25% (% em massa) de PLA esse efeito não foi tão evidente. Os resultados obtidos no ensaio de tração mostraram que com o aumento do teor de compatibilizante, a tensão no escoamento, a tensão na ruptura e o módulo elástico das blendas com 75% (% em massa) de PLA se mantiveram praticamente constantes, enquanto que a deformação na ruptura evoluiu de 20% na blenda com 1,5% (% em massa) de copolímero para 84% na blenda com 5% (% em massa) de copolímero. As análises morfológicas indicaram que o copolímero em bloco agiu na interface PLA/PCL, melhorando sua adesão. Esse resultado foi reforçado pelas análises térmicas, onde foi constatado que as Tg\'s e Tm\'s do PLA e do PCL nas blendas não apresentaram alterações, o que indica que o copolímero encontra-se na região interfacial da blenda. A resistência ao impacto Izod com entalhe, propriedade mecânica utilizada nesse trabalho como uma medida da tenacidade, da blenda PLA75C5 alcançou 42 J/m, valor significativamente superior ao determinado para o PLA puro, por volta de 28 J/m. Esses resultados mostram claramente que o copolímero tribloco derivado de ε-caprolactona e tetrametileno éter glicol é um eficiente compatibilizante para blendas PLA/PCL. / The Poly (lactic acid) (PLA) is a biodegradable, biocompatible and bioabsorbable polymer derived from renewable sources. It is an excellent sustainable alternative to polymers derived from oil, currently dominating the industry. However, PLA has low ductility and poor toughness as main mechanical limitations. Mechanical mixing of PLA with flexible polymers, such as poly (ε-caprolactone) (PCL), is one of the most used methods to modify these properties. However, a high mechanical performance of PLA/PCL blends is difficult to achieve due to the immiscibility of the polymers. The improvement of properties in this case is achieved only by compatibilization. This study aims to evaluate compatibilizer effect of a low molecular weight tri-block copolymer derived from ε-caprolactone and tetramethylene ether glycol, commercially available, on immiscible blends of PLA with PCL. Binary and ternary blends were prepared by mechanical blending in melt state through a single screw extrusion. The content of PLA in the blends ranged in 75, 50 and 25 wt% and the concentration of copolymer in 0, 1.5, 3 and 5 wt%. The morphological evaluation and the thermal and mechanical behavior of PLA/PCL blends were performed by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and tensile test, flexural and Izod impact. The compatibilizer effect of the copolymer was more clearly observed in the blends with 75 wt% PLA, whereas in blends with 50 wt% to 25 wt% of PLA this effect was not so evident. The results of the mechanical tests showed that with the increase of the compatibilizer content, the yield stress, the stress at break and the elastic modulus of the blends with 75% (wt%) remained practically constant, while the elongation at break evolved from 20% in the blend with 1.5 wt% of copolymer to 84% in the blend to with 5 wt% of copolymer. Morphological analysis indicated that the block copolymer acted in the PLA/PCL interface, improving adhesion. This results were reinforced by thermal analysis, where it was found that the Tg and Tm of PLA and PCL in the blends showed no change, indicating that the copolymer is in the interfacial region of the blend. The Izod impact strength (Notched Izod), mechanical properties used in this work as a measure of toughness, of the blend PLA75C5 reached 42 J/m, significantly higher than the determined for pure PLA, about 28 J/m. These results clearly show that the triblock copolymer derived from ε-caprolactone and tetramethylene ether glycol is a good compatibilizer for blends PLA/PCL because it acts at the interfacial region, promoting the adhesion between the phases.

Um aktuelle naturwissenschaftliche Forschung und neue Technologien in den allgemeinbildenden Unterricht einzubringen, müssen Lehramtsstudierende der Physik und Chemie an der Technischen Universität Dresden Betriebspraktika in Forschungseinrichtungen und Wirtschaftsunternehmen absolvieren. Zu diesem Zweck wird das Betriebspraktikum fachdidaktisch vor- und nachbereitet werden. In dieser Arbeit wird die Nachbereitungsphase zur Verbindung des Betriebspraktikums mit dem Unterricht empirisch erforscht, da bisher fachdidaktische Erkenntnisse über genau diese Phase fehlen. Dazu verfassen die Lehramtsstudierenden einen Praktikumsbericht sowie einen populärwissenschaftlichen Zeitungsartikel und bewerten inwiefern die Arbeitsinhalte für den Unterricht geeignet sind. Das Ergebnis der Arbeit ist ein Katalog von Problemen und Einstellungen, welche die Lehramtsstudierenden in der Nachbereitungsphase bei der didaktischen Rekonstruktion der beobachteten Arbeitsinhalte haben. Die Probleme und Einstellungen sind Ausgangspunkt für die konzeptionelle Gestaltung der Nachbereitungsphase. Es zeigt sich, dass die Einstellungen der Studierenden die Durchführung des Betriebspraktikums und den späteren Unterricht maßgeblich beeinflussen. Die Ergebnisse werden vorgestellt und diskutiert sowie Empfehlungen für die Lehrerausbildung abgeleitet.:1 Einleitung 2 Aktuelle Forschung und neue Technologien im Unterricht 3 Das Betriebspraktikum in der Lehrerbildung – Olle Kamelle oder neue Idee? 4 Ableitung eines Modells zur Analyse des Transfers 5 Empirischer Zugang zur Untersuchung des Transfers 6 Auswertung der Praktikumsberichte 7 Auswertung der Zeitungsartikel 8 Auswertung der Interviews 9 Das Muster hinter den Daten – Eine zusammenfassende Längsanalyse 10 Zu zweit durch das Betriebspraktikum – Chance oder Wagnis? 11 Ein zweites Betriebspraktikum – Gewinn oder Verschwendung? 12 Zusammenfassung und Diskussion 13 Vorschläge für zukünftige Arbeiten Anhang