Disertační práce se zabývá simulací elektronických obvodů. Popisuje metodu kapacitorové substituce (CSM) pro převod elektronických obvodů na elektrické obvody, jež mohou být následně řešeny pomocí numerických metod, zejména Moderní metodou Taylorovy řady (MTSM). Tato metoda se odlišuje automatickým výběrem řádu, půlením kroku v případě potřeby a rozsáhlou oblastí stability podle zvoleného řádu. V rámci disertační práce bylo autorem disertace vytvořeno specializované programové vybavení pro řešení obyčejných diferenciálních rovnic pomocí MTSM, s mnoha vylepšeními v algoritmech (v porovnání s TKSL/386). Tyto algoritmy zahrnují zjednodušování obecných výrazů na polynomy, paralelizaci nezávislou na integrační metodě atp. Tento software běží na linuxovém serveru, který komunikuje pomocí protokolu TCP/IP. Toto vybavení bylo úspěšně použito pro simulaci VLSI obvodů, jejichž řešení pomocí CSM bylo značně rychlejší a spotřebovávalo méně paměti než state-of-the-art SPICE.

This work deals with a proposal and construction of a DC/DC converter for a control of a DC motor Heinzmann. The DC/DC converter will be used in an electric drive for a bicycle. The proposal of the DC/DC converter is designed for such engine power to avoid fully any human force to drive - pedaling. The work includes informations about the used motor, progress of proposal and dimensioning of the converter - power circuit and control electronics.

This thesis deals with desing of serial resonant converter with regulation output voltage in full bridge configuration like alternative power switching converter with pulse width modulation. The thesis includes analysis of serial resonant converter, desing power transformer, driving circuits. The thesis concludes with the functional converter and complete technical documentation.

Diploma thesis work includes simulation of compensation of control for discrete. The aim of the work is a solution positioning control of servomotor drive piston, which is controlled by pass of the pressure oil with the help of several electromagnetically controlled switchboards with the orifice in the output channels. The verification activities of the regulated system is done using simulation in Matlab/Simulink and Matlab/Simulink, Matlab/Hydrosim. The requirement on the created model is to verify the behavior of the system to be modified to be used for the further development of the issue

Diploma thesis work includes simulation of compensation of control for discrete. The aim of the work is a solution positioning control of servomotor drive piston, which is controlled by pass of the pressure oil with the help of several electromagnetically controlled switchboards with the orifice in the output channels. The verification activities of the regulated system is done using simulation in Matlab/Simulink and Matlab/Simulink, Matlab/Hydrosim. The requirement on the created model is to verify the behavior of the system to be modified to be used for the further development of the issue

The master’s thesis is focused on the proposal of working part of the hydraulic circuit for the hydraulic press with a press force 400 kN. The thesis contains justifiable structural design of the linear hydraulic motor, which includes material choices, necessary calculations and simulations of material strength characteristics and the choice of the individual components. The thesis also includes a proposal of “heel valve” including the choice of individual components and basic function calculation of the hydraulic circuit of the hydraulic press.

This diploma thesis deals with the inner immigration of inhabitants in the South Bohemia region in 1992-2004 from the point of view of administrative districts with extended operation. Furthermore, the thesis defines and evaluates the migration region of České Budějovice. Apart from the balance characteristics of migration, it is also concerned with the structural analysis based on the migration purposes as well as selected demographic and socio-economic characteristics of migrants.

This thesis is based on top of the previous thesis "Security of modern encryption protocols" where we introduced a new paradigm for constructing quantum circuits. We have built circuits for modular arithmetic (addition, multiplication and exponentiation) in order to break El-Gamal asymmetric cryptosystem. Current thesis reviews all proposed circuits and discusses possibilities of their further optimization in goal of lowering the number of used qbits at least by an order of magnitude. It also shows that this is not possible due to existence of COPY gates which make the design inherently unoptimizable. Getting rid of COPY gates is, however, not possible without substantial rewrite of the whole paradigm. The overall estimate of number of qbits used in circuits thus remains O(log(m)log^2(N)) where m is a processed number and N is a modulus. The thesis also proposes optimization of the modular multiplication circuit that, if issues with COPY gates are resolved, allows us to lower the number of used qbits by about O(log(m)) at the price of a longer execution time.

This thesis deals with the design of the propulsion and braking system for narrow gauge railcar. It contains the design of hydrostatic drive system with closed-loop hydraulic circuit. Then thesis describes the concept of propulsion system placement in the frame of the railcar and design of the braking system.

The Master‘s thesis deals with the topic of perovskite solar cells with the main focus on the materials used for the active layer. In the introductory part, the electrical and optical properties of halide perovskites are described and specific examples of perovskite crystals are introduced. The description of impedance and photoimpedance measurement methods used for characterization of perovskite solar cells is also included in the thesis. The measurement of electrochemical impedance spectroscopy was conducted on four perovskite crystals and equivalent circuit was formed to fit the obtained data. Parameters of the circuit elements were acquired using the fitting method and were further evaluated in experimental part of this thesis.