Thesis (M.S.)--Oregon State University, 2008. / Printout. Includes bibliographical references (leaves 125-126). Also available on the World Wide Web.

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Civil Engineering, 1979. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING. / Bibliography: leaves 120-121. / by Pierre Haren. / M.S.

The research presented in this thesis utilizes Blade Element Momentum (BEM) theory with a dynamic wake model to customize the OrcaFlex numeric simulation platform in order to allow modeling of moored Ocean Current Turbines (OCTs). This work merges the advanced cable modeling tools available within OrcaFlex with well documented BEM rotor modeling approach creating a combined tool that was not previously available for predicting the performance of moored ocean current turbines. This tool allows ocean current turbine developers to predict and optimize the performance of their devices and mooring systems before deploying these systems at sea. The BEM rotor model was written in C++ to create a back-end tool that is fed continuously updated data on the OCT’s orientation and velocities as the simulation is running. The custom designed code was written specifically so that it could operate within the OrcaFlex environment. An approach for numerically modeling the entire OCT system is presented, which accounts for the additional degree of freedom (rotor rotational velocity) that is not accounted for in the OrcaFlex equations of motion. The properties of the numerically modeled OCT were then set to match those of a previously numerically modeled Southeast National Marine Renewable Energy Center (SNMREC) OCT system and comparisons were made. Evaluated conditions include: uniform axial and off axis currents, as well as axial and off axis wave fields. For comparison purposes these conditions were applied to a geodetically fixed rotor, showing nearly identical results for the steady conditions but varied, in most cases still acceptable accuracy, for the wave environment. Finally, this entire moored OCT system was evaluated in a dynamic environment to help quantify the expected behavioral response of SNMREC’s turbine under uniform current. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2013.

This research focused on maximizing the power generated by an array of ocean current turbines. To achieve this objective, the produced shaft power of an ocean current turbine (OCT) has been quantified using CFD without adding a duct, as well as over a range of duct geometries. For an upstream duct, having a diameter 1.6 times the rotor diameter, the power increased by 8.35% for a duct that extends 1 diameter upstream. This research also focused on turbine array optimization, providing a mathematical basis for calculating the water velocity within an array of OCTs. After developing this wake model, it was validated using experimental data. As the downstream distance behind the turbine increases, the analytic results become closer to the experimental results, with a difference of 3% for TI = 3% and difference of 4% for TI = 15%, both at a downstream distance of 4 rotor diameters. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2018. / FAU Electronic Theses and Dissertations Collection

<p>Electric energy conversion is an important issue in today's society as our daily lives largely depend on the supplies of energy. Two energy sources are studied for conversion in the present thesis, ocean waves and hydropower. The work focuses on the generator and the transmission of its output to the electric grid.</p><p>Different approaches have been used, over the years, to convert the energy in ocean waves, and the method presently used is based on a point absorber (buoy) directly coupled to a linear generator on the seabed. A varying alternating voltage is induced with such configuration, where both the amplitude and the frequency changes continuously. The target is to connect several units in a farm, and thereby decrease the fluctuations in power production. This is shown to be possible to accomplish with a rectifier connected to each generator. Transmission systems can be designed with converters and transformers to connect the farm to the electric grid onshore. Several aspects of the concept are considered as well as interconnection issues. Analytical calculations verified by finite element simulations and measured data are used to model the behaviour of a linear generator. A series expanded expression for the ideal no-load flux and EMF (electromotive force) is derived, which can be developed into an analytical transmission design tool.</p><p>Hydropower has been used for more than a century. Today many of the stations from the mid 1900's are up for refurbishment. Studies with finite element calculations show that a higher electric efficiency can be obtained with a high voltage cable wound generator.</p>

Wave Energy Converters (WECs) promise to be a viable alternative to current electrical generation methods. However, these WECs must become more efficient before wide-scale industrial use can become cost-effective. The efficiency of a WEC is primarily dependent upon its geometry and ballast configuration which are both difficult to evaluate, due to slow computation time and high computation cost of current models. In this thesis, we use evolutionary algorithms to optimize the ballast geometry of a wave energy generator using a two step process. First, we generate a function approximator (neural network) to predict wave energy converter power output with respect to key geometric design variables. This is a critical step as the computation time of using a full model (e.g., AQWA) to predict energy output prohibits the use of an evolutionary algorithm for design optimization. The function approximator reduced the computation time by over 99% while having an average error of only 3.5%. The evolutionary algorithm optimized the weight distribution of a WEC, resulting in an 84% improvement in power output over a ballast-free WEC. / Graduation date: 2012

The eventual deployment of wave energy converters (WECs) on a commercial scale will necessitate the grouping of devices into arrays or "wave farms," in order to minimize overhead costs of mooring, maintenance, installation, and electrical cabling for shoreward power delivery. Closely spaced WECs will interact hydrodynamically through diffracted and radiated waves. Recent research has focused on the WEC wave field and used its structures to design constructive WEC arrays as well as to describe the means of WEC energy absorption. In this study, the WEC wave field is investigated for a single WEC and a five WEC array with linear wave theory and experimental results. Both regular waves and spectral seas are considered. Computational results are produced with the linear boundary-element-method (BEM) hydrodynamic software WAMIT for a simple WEC geometry. Experimental data comes from WEC array tests that took place at Oregon State University over the winter of 2010-11 [1]. The experimental measurements help validate the computational modeling, and the computational models serve as an aid to interpreting the experimental data. Results reveal two universal WEC wave field features - partially standing waves and a wave shadow, both of which are the result of the coherent interaction of the planar incident wave with the circular generated wave, composed of the diffracted and radiated waves. The partial standing waves in the offshore are seen qualitatively in experimental data but could not be exactly reproduced computationally, because the computational model is only a simple representation of the physical model. In the lee of the WEC, the measured longshore structure of the wave shadow is in good agreement with theoretical expectations as well as computational results. It is believed that the agreement is because the formation of the wave shadow is dominated by energy extraction, which was approximately the same for both the computational and physical models. A study of the linear WEC wave field in regular waves and spectral seas reveals patterns such as the wave shadow that have also been found in experimental data. The positions and magnitudes of the offshore partially standing waves are very sensitive to wavelength, and WEC geometry, motions and location, and in spectral seas, they are smoothed when considering significant wave height. All of which suggest that it may be difficult to use them advantageously in the design of WEC arrays. The wave shadow is a dominant feature of the WEC wave field for both regular waves and spectral seas. It appears to be fairly generic and to be based on power absorption. In the design of WEC arrays, rather than attempting constructive interference by using standing wave crests, perhaps the best one can do is to avoid destructive interference of the wave shadow. / Graduation date: 2013

Electric energy conversion is an important issue in today's society as our daily lives largely depend on the supplies of energy. Two energy sources are studied for conversion in the present thesis, ocean waves and hydropower. The work focuses on the generator and the transmission of its output to the electric grid. Different approaches have been used, over the years, to convert the energy in ocean waves, and the method presently used is based on a point absorber (buoy) directly coupled to a linear generator on the seabed. A varying alternating voltage is induced with such configuration, where both the amplitude and the frequency changes continuously. The target is to connect several units in a farm, and thereby decrease the fluctuations in power production. This is shown to be possible to accomplish with a rectifier connected to each generator. Transmission systems can be designed with converters and transformers to connect the farm to the electric grid onshore. Several aspects of the concept are considered as well as interconnection issues. Analytical calculations verified by finite element simulations and measured data are used to model the behaviour of a linear generator. A series expanded expression for the ideal no-load flux and EMF (electromotive force) is derived, which can be developed into an analytical transmission design tool. Hydropower has been used for more than a century. Today many of the stations from the mid 1900's are up for refurbishment. Studies with finite element calculations show that a higher electric efficiency can be obtained with a high voltage cable wound generator.

The increasing demand for energy and the increased depletion rate of nonrenewable energy resources call for research on renewable alternatives. Mapping the availability of these resources is an important step for development of energy conversion projects. For this purpose, the wave power potential along the Atlantic coast of the southeastern USA, and the tidal stream power along the coast of Georgia are investigated in this study. Wave power potential is studied in an area bounded by latitudes 27 N and 38 N and longitudes 82 W and 72 W (i.e. North Carolina, South Carolina, Georgia, and northern Florida). The available data from National Data Buoy Center wave stations in the given area are examined. Power calculated from hourly significant wave heights and average wave periods is compared to power calculated using spectral wave energy density. The mean power within 50 km of the shore is determined to be low, whereas higher power is available further offshore beyond the 3500 m contour line. The tidal stream power potential along the coast of the state of Georgia is evaluated based on the NOAA tidal predictions for maximum tidal currents and three dimensional numerical modeling of the currents with Regional Ocean Modeling System (ROMS). The modeling results are validated against the available measurements. This region has low to moderate average tidal currents along most of the coast, but with the possibility of very strong local currents within its complex network of tidal rivers and inlets between barrier islands. Tidal stream power extraction is simulated with a momentum sink in the numerical models at the estuary scale to investigate effect of power extraction on the estuarine hydrodynamics. It is found that different power extraction schemes might have counterintuitive effects on the estuarial hydrodynamics and the extraction efficiency. A multi-criteria method that accounts for the physical, environmental and socioeconomic constraints for tidal power conversion schemes is proposed to select favorable locations and to rank them according to their suitability. For this purpose, the model results are incorporated into a Geographical Information System (GIS) database together with other geospatial datasets relevant to the site selection methodology. The methodology is applied to the Georgia coast and the candidate areas with potential are marked.

No description available.