Company Purtech in Dals-Ed manufactures molded polyurethane (PUR). Examples of products that include polyurethane are car seats. Robots are used to fill the molds with PUR and to apply the release agent (wax) in the empty molds. Turning from online programming into a graphical offline programming of release agent spraying robots is going to simplify the process by: Applying less of release agent to avoid polluting environment, to produce an easier removal of moulds, for the sake of homogeneous moulds and for economical saving in the cost of release agent Adaption of spraying paths to variation in production speed. Programming of complex spraying trajectories to deal with sharp geometrical subsurface Decreasing onsite programming time (when program a new workpiece or modify an old one); so that robots would be free for production. While turning into offline programming brought the challenges of: Impact of variation in the production speed Lack of 3D models of workcell’s equipments Robot joint configuration when paths and robtargets are in move. Physical Joint limits, Singularities & Reach limits Collisions within the cell space. At the end, the following objectives are successfully met: Adaption of spraying programs to variation in production speed by developing and embedding a method in those programs. Graphical offline generation of spraying trajectories and optimization of those trajectories to the Purtech condition of spraying allowed time for each carrier. Simulation of release agent spraying process; and producing of a well structured RAPID program that reflect the simulated process.

Metal deposition is an additive layered manufacturing process that deposits molten metal droplets on a substrate and by repeating this process layer by layer, a complex shaped 3D geometry can be manufactured. In this thesis, the metal deposition process is performed by a robot with a wire feeder tool and a laser as energy source to melt the metal wire. The robot programming for robotized metal deposition process can be completely automated by computer aided robotics software. University West is currently developing an add-in application in a computer aided robotics software, Process Simulate, that is capable of programming the robotized metal deposition process. The first goal of this thesis was to verify the up to now developed software and the process from CAD drawing down to robot code. Another goal was to find and implement an algorithm that will reduce the number of locations on a circular arc to three locations. The algorithm to minimize the locations must be capable of changing all the different curvature paths to linear and circular arc motions which are easy to translate to robot code. The user should be able to decide the fitting precision of the approximated motion path to the original path. A real robot cell setup is modelled in Process Simulate. This lets Process Simulate generate the correct robot code for that specific cell.  Since each robot cell has its own unique setup, a custom script will be developed that changes the universal robot code, that Process Simulate generates, to the custom robot code required in this specific robot cell. The software is improved and tested from CAD drawing down to robot code but still needs to be debugged more and needs implementation of some non-existing features.

The cab assembly line in Oskarshamn is one of the world's most high tech production unit. With close to 300 robots the cab is assembled with merely programmed robots and no input from humans. Scania CV AB is a world leading manufacturer of trucks with high influence on the market globally. Even though robots do most of the work, there have been human brains behind the robot execution, and there is constant work ongoing to further increase efficiency and cycle times to meet the increasing global demand for logistics services. The robots are mainly programmed offline, using the ABB software Robotstudio, which basically creates a digital representation of the actual control system without interfering with the production. Testing upgraded programs as well as simulating them offline before implementation is an essential daily operation to make the production meet the demands. This thesis is divided into two objectives, one theoretical and one practical. The theoretical part focuses on the software, and consists of a critical analysis of a series of different software solutions for programming robots offline, as well as a look into how the offline programming processes work today in-house. The practical objective is to further improve the quality of the simulations conducted through creating tools to answer the calls from functional packages for the different processing equipment used on site. These functional packages lets you perform spot welding, gluing or gripping for instance, and as it is an outsourced service a lot of the coding is encrypted which prevents simulations being conducted with the pre-programmed routines, it makes the simulations crash. This report presents conclusions made regarding the use of offline programming equipment both in the regards of daily operations as well as long term strategies with digital twins and digitization. It also proves that the functional packages still can be simulated even though the code has been manipulated and encrypted at one point. It holds the complete ways of how to, from a 3D CAD model, create mechanisms, synchronize external axes, and creating smart components to answer digital inputs and presenting digital outputs to the system to have a fully functional simulation run.

Programming industrial robots for welding or part manipulation tasks is a time-consuming and complicated process, resulting in companies not able to implement robot systems and exploit their advantages. To reduce the time needed for programming, research is looking into ways to automate this process and reduce manual labour.In this thesis a concept for automating the programming process of industrial robots was investigated using EXCEL VBA and CATIA/DELMIA. It was done for an industrial grating model of varying sizes and configurations, resulting in a time reduction of 99% compared to manual creation. For this, the model was first automatically created from scratch for the required configuration and afterwards a robot motion was created fully automatically. The concept and modelling approach is described, and the automation approach detailed. Finally, the results are analysed and discussed.

La technologie de programmation hors-ligne permet la génération de la trajectoire complexe en projection thermique. Dans le laboratoire du LERMPS, une extension logicielle appelée « Thermal Spray Toolkit » (T.S.T.) a été développée pour assister la programmation hors-ligne dans le domaine de projection thermique. Cependant, les efforts sont encore attendus pour améliorer sa fonctionnalité. Donc, l'objectif de cette thèse est d'améliorer l'application de la programmation hors-ligne en projection thermique. Selon la procédure d'application, les travaux de cette thèse se composent de trois parties.Premièrement, les efforts sont dévoués à l'amélioration du module « PathKit » dans T.S.T., afin d'optimiser la fonctionnalité de la génération de la trajectoire. L'algorithme pour la génération de la trajectoire sur le substrat courbe a été étudié pour assurer le pas de balayage constant. Une nouvelle trajectoire « spirale d'Archimède » a été développé pour réparer les défauts par la projection à froid. La réparation sur une pièce d'aluminium avec un défaut a été réalisé pour valider la trajectoire spirale d'Archimède. Deuxièmement, les modélisations ont été développées pour simuler l'épaisseur du dépôt en 2D et en 3D. Puis, Ils sont intégrés dans le logiciel RobotStudioTM comme un module individuel dit « ProfileKit ». Dans le « ProfileKit 2D », il peut évaluer les effets des paramètres opératoires sur le profil du dépôt et puis optimiser les paramètres. Dans le « ProfileKit 3D », l'épaisseur du dépôt peut être simulée selon la trajectoire du robot et la cinématique du robot.Les fonctionnalités sont validées par un dépôt de forme trapézoïdal élaboré par la projection à froid avec les pas debalayage variés.Dernièrement, l'analyse cinématique du robot a été étudiée pour optimiser la performance du robot pendant le processus de projection. Afin de mieux évaluer la performance du robot, un paramètre « overall parameter » (OP), la moyenne pondérée d'écart-type de la vitesse articulaire est introduit pour mesurer la complexité de la trajectoire du robot. Ensuite, l'optimisation du montage de la torche ainsi que l'optimisation de la disposition de la pièce sont étudiées par l'analyse cinématique du robot et le paramètre OP. Le résultat montre que l'optimisation cinématique peut efficacement améliorer la performance du robot pour maintenir la vitesse prédéfinie. / The offline programming technology provides the possibility to generate complex robot trajectories in thermal spray process. In the laboratory of LERMPS, an add-in software called “Thermal SprayToolkit” (T.S.T.) has been developed to assist the offline programming in the field of thermal spray.However, efforts are still expected to improve the functionality of this software. The aim of this study is to improve the application of offline programming technology in the thermal spray process. According to the procedure of the offline programming in thermal spray, the work of this thesis consists of three parts.Firstly, efforts have been dedicated to improve the module “PathKit” in T.S.T., which aim to improve the functionality of trajectory generation. The algorithm of trajectory generation for the curved substrate surface was improved to maintain a constant scan step. A novel Archimedean spiral trajectory was developed for damage component recovery application by cold spray. The experiment of an Al5056 coating depositing on a manually manufactured workpiece with a crater defect was carried out to validate the effects of spiral trajectory with adapted nozzle speed.Secondly, numerical models were developed to simulate the coating thickness distribution in 2D and 3D, and then integrated in the RobotStudio™ as an individual module named “ProfileKit”. In the “ProfileKit 2D”, it is able to evaluate the effects of operating parameters on coating profile and optimize the parameters. In the “ProfileKit 3D”, coating thickness distribution can be simulated based on the nozzle trajectory and robot kinematics data. The functionalities were validated by the trapezoid coldsprayed coating.At last, kinematic analysis was used to provide the optimization methods for a better robot performance in thermal spraying. In order to better evaluate the robot performance, an overall parameter (OP) that is the weighted mean of standard deviation of joint speed, was introduced to measure the complexity of a robot trajectory. Afterwards, the optimal nozzle mounting method as well as the optimal workpiece placement were investigated by the kinematic analysis and the overall parameter. The result shows that the kinematic optimization can effectively improve the robot performance to maintain the predefined speed.