A major driving force for development of new catalyst systems is the need for more efficient synthesis of chemical compounds essential to modern life. Catalysts having superior performance offer significant environmental and economic advantages, but their discovery is not trivial. Well-defined, homogeneous catalysts can offer unparalleled understanding of ligand effects, which proves invaluable in directing redesign strategies. This thesis work focuses on the design of ruthenium complexes for applications in dinitrogen activation and olefin metathesis. The complexes developed create new directions in small-molecule activation and asymmetric catalysis by late-metal complexes. Also examined are the dual challenges, ubiquitous in catalysis, of adequate interrogation of catalyst structure and performance. Insight into both is essential to enable correlation of ligand properties with catalyst activity and/or selectivity. Improved methods for accelerated assessment of catalyst performance are described, which expand high-throughput catalyst screening to encompass parallel acquisition of kinetic data. A final aspect focuses on direct examination of metal complexes, both as isolated species, and under catalytic conditions. Applications of charge-transfer MALDI mass spectrometry to structural elucidation in organometallic chemistry is described, and the technique is employed to gain insight into catalyst decomposition pathways under operating conditions.

Optimized methods for the regioselective and stereospecific synthesis of both trisubstituted and tetrasubstituted olefins as single isomers from E-β-chloro-α-iodo-α,β-unsaturated esters have been developed from previous work done in the Ogilvie lab. These optimized methods have led to the synthesis of trans isomeric enediynes that can be photoisomerized to their respective cis isomers and subsequently undergo microwave-assisted Bergman cycloaromatizations. Furthermore, both cis and trans isomeric enediynes that have propargyl ether substituents have been found to be able to undergo photoactivated Bergman cyclizations without the need for an intermolecular hydrogen donor. A mechanism study has confirmed that the Bergman cyclization products that form without the presence of an intermolecular hydrogen donor undergo a series of 1,5-hydrogen shifts as intermediates. A series of optimizations to these reactions were carried out, in part by utilizing electron-donating or electron-withdrawing functional groups to help stabilize the resulting radicals that form on the intermediates, and thus increase the yield of the associated Bergman cyclization products.

A major driving force for development of new catalyst systems is the need for more efficient synthesis of chemical compounds essential to modern life. Catalysts having superior performance offer significant environmental and economic advantages, but their discovery is not trivial. Well-defined, homogeneous catalysts can offer unparalleled understanding of ligand effects, which proves invaluable in directing redesign strategies. This thesis work focuses on the design of ruthenium complexes for applications in dinitrogen activation and olefin metathesis. The complexes developed create new directions in small-molecule activation and asymmetric catalysis by late-metal complexes. Also examined are the dual challenges, ubiquitous in catalysis, of adequate interrogation of catalyst structure and performance. Insight into both is essential to enable correlation of ligand properties with catalyst activity and/or selectivity. Improved methods for accelerated assessment of catalyst performance are described, which expand high-throughput catalyst screening to encompass parallel acquisition of kinetic data. A final aspect focuses on direct examination of metal complexes, both as isolated species, and under catalytic conditions. Applications of charge-transfer MALDI mass spectrometry to structural elucidation in organometallic chemistry is described, and the technique is employed to gain insight into catalyst decomposition pathways under operating conditions.

Optimized methods for the regioselective and stereospecific synthesis of both trisubstituted and tetrasubstituted olefins as single isomers from E-β-chloro-α-iodo-α,β-unsaturated esters have been developed from previous work done in the Ogilvie lab. These optimized methods have led to the synthesis of trans isomeric enediynes that can be photoisomerized to their respective cis isomers and subsequently undergo microwave-assisted Bergman cycloaromatizations. Furthermore, both cis and trans isomeric enediynes that have propargyl ether substituents have been found to be able to undergo photoactivated Bergman cyclizations without the need for an intermolecular hydrogen donor. A mechanism study has confirmed that the Bergman cyclization products that form without the presence of an intermolecular hydrogen donor undergo a series of 1,5-hydrogen shifts as intermediates. A series of optimizations to these reactions were carried out, in part by utilizing electron-donating or electron-withdrawing functional groups to help stabilize the resulting radicals that form on the intermediates, and thus increase the yield of the associated Bergman cyclization products.

A new analytical technique to measure the chemical composition distribution (CCD) of polyolefins, crystallization elution fractionation (CEF), was introduced in 2006 during the First International Conference on Polyolefin Characterization. CEF is a faster and higher resolution alternative to the previous polyolefin CCD analytical techniques such as temperature rising elution fractionation (TREF) and crystallization elution fractionation (CRYSTAF) (Monrabal et al., 2007). Crystallization elution fractionation is a liquid chromatography technique used to determine the CCD of polyolefins by combining a new separation procedure, dynamic crystallization, and TREF. In a typical CEF experiment, a polymer solution is loaded in the CEF column at high temperature, the polymer is allowed to crystallize by lowering the solution temperature, and then the precipitated polymer is eluted by a solvent flowing through the column as the temperature is raised. CEF needs to be calibrated to provide quantitative CCD results. A CEF calibration curve consists of a mathematical relationship between elution temperature determined by CEF and comonomer fraction in the copolymer that could be estimated by Fourier transform infrared spectroscopy (FTIR) and carbon-13 nuclear magnetic resonance (13C NMR). Different comonomer types in ethylene/α-olefin copolymers will have distinct calibration curves. The main objective of this thesis is to obtain CEF calibration curves for several different ethylene/α-olefin copolymers and to investigate which factors influence these calibration curves. A series of homogeneous ethylene/α-olefin copolymers (1-hexene, 1-octene and 1-dodecene) with different comonomer fractions were synthesized under controlled conditions to create CEF calibration standards. Their average chemical compositions were determined by 13C NMR and FTIR and then used to establish CEF calibration curves relating elution temperature and comonomer molar fraction in the copolymer.

The major goals of this work were to: develop a new methodology for the preparation of site-isolated catalytic sites on a silica surface, prepare the first truly single-site supported metallocene/CGC polymerization catalyst, and develop structure-reactivity relationships for these new systems. To synthesize these novel catalysts, the approach taken was to develop a protocol which allows for the synthesis of an aminosilica material with isolated, uniform amine sites. This patterned aminosilica was then used as a scaffold to support a constrained geometry catalyst. These functionalizations occurred at essentially a quantitative level, in stark contrast to previous literature reports. The patterned catalysts were evaluated in the polymerization of ethylene and compared to densely loaded literature materials. Overall, it was found the patterned materials were 5-10 times more active than traditional immobilized CGC catalysts. The patterned catalysts were also found to be effective catalysts for the copolymerization of norbornenes (including functionalized norbornenes) and ethylene, the first reported use of a tethered CGC for the production of ethylene-norbornene copolymers. The control materials were inactive in these polymerizations, providing further evidence that the patterning protocol allows for the synthesis of unique highly active, isolated catalytic sites. Various structural components of the immobilized CGC developed in this work were tested for their impact on catalyst synthesis and reactivity in ethylene polymerizations. The results showed the patterned materials in general behaved according to the trends seen in homogeneous CGC polymerizations. These results, while congruent with similar homogeneous CGC studies, are in direct conflict with previous work on supported CGCs reported in the literature. This discrepancy is likely the result of the difference between the isolated, possibly single-site patterned catalysts developed in the course of this work and the multi-sited catalysts prepared by traditional supporting protocols. This also further illustrates the difficulty in developing structure-reactivity relationships when ill-defined solid catalysts are used.

Propylene is one of the most important feedstocks of the petrochemical industry with an estimated 2015 worldwide demand of 100 million tons. Retrofitting conventional C3 splitters is highly desirable due to the huge amount of thermal energy required to separate propylene from propane. Membrane separation is among the alternatives that both academia and industry have actively studied during the past decades, however; many challenges remain to advance membrane separation as a scalable technology for energy-efficient propylene/propane separations. The overarching goal of this research is to provide a framework for development of scalable ZIF-based mixed-matrix membrane that is able to deliver attractive transport properties for advanced gas separations. Zeolitic imidazolate frameworks (ZIFs) were pursued instead of conventional molecular sieves (zeolites and carbon molecular sieves) to form mixed-matrix membrane due to their intrinsic compatibility with high Tg glassy polymers. A systematic study of adsorption and diffusion in zeolitic imidazolate framework-8 (ZIF-8) suggests that this material is remarkably kinetically selective for C3 and C4 hydrocarbons and therefore promising for membrane-based gas separation and adsorptive separation. As a result, ZIF-8 was used to form mixed-matrix dense film membranes with polyimide 6FDA-DAM at varied particle loadings and it was found that ZIF-8 significantly enhanced propylene/propane separation performance beyond the “permeability-selectivity” trade-off curve for polymeric materials. Eventually, this research advanced ZIF-based mixed-matrix membrane into a scalable technology by successfully forming high-loading dual-layer ZIF-8/6FDA-DAM asymmetric mixed-matrix hollow fiber membranes with attractive propylene/propane selectivity.

Regiomeric mixture of HMe2Si(CH2)3(i-Bu)6Si7O9(OH)3 (6), containing a Si-H group in one of the ligands of the silsesquioxane, was tethered onto a vinyl terminated hyperbranched poly(siloxysilane) polymer via a hydrosilation reaction to generate extremely active catalysts, P1-8 and c-P1-8. The synthesis of 6, in good yield, was accomplished via hydrosilation of CH2=CHCH2(i-Bu)7Si8O12 (1) to generate ClMe2Si(CH2)3(i-Bu)7Si8O12 (3) followed by the reduction of 3 with LiAlH4 to afford HMe2Si(CH2)3(i-Bu)7Si8O12 (4) where the base-catalyzed excision of one framework silicon was employed to generate a regiomeric mixture of 6. [Ti(NMe2){Et3Si(CH2)3(i-Bu)6Si7O12}] (7), [Ti(NMe2){HMe2Si(CH2)3(i-Bu)6Si7O12}] (8), [Ti(NMe2){(i-C4H9)7Si7O12}] (9) and [Ti(NMe2){(c-C6H11)7Si7O12}] (10) were synthesized via protonolysis of Ti(NMe2)4 with one equivalent of the trisilanol precursor in order to determine if the presence of isomers would be intrinsically different as compared to the uniformly substituted catalysts. Isomers 8 and 9, demonstrated lower activity as compared to the uniformly substituted catalysts 9 and 10, however the isomers still exhibited extremely high catalytic activity for the epoxidation of 1-octene using tert-butyl hydroperoxide (TBHP) relative to titanium catalysts used in industry. Additionally, 9, 10, P1-8 and c-P1-8 were very selective catalysts for the epoxidation of various olefins such as terminal (1-octene), cyclic (cyclohexene or 1-methylcyclohexene), and more demanding olefins (limonene or α-pinene) employing TBHP as the oxidant. Furthermore, P1-8 and c-P1-8 were recyclable with minimal loss of titanium however the catalysts could also be repaired if a loss in activity was observed. Preliminary epoxidation reactions employing P1-8 and c-P1-8 along with hydrogen peroxide (H2O2) as the oxidant were also explored using different solvents. P1-8 degraded quickly due to the hydrolysis of the titanium from the large amount of water present in the reaction mixture however c-P1-8 showed activity for the epoxidation of cyclohexene. Finally, regiomeric mixture of Ti(NMe2)(HS(CH2)3)(i-C4H9)6Si7O12) (13), was tethered onto gold nanoparticles for the conversion of propene to propylene oxide using molecular hydrogen and oxygen. While the catalysts showed low activity under our reaction conditions, numerous improvements can be investigated in order to improve upon the catalysts.

With the ever expanding utility of transition metal catalysis, there has been a thrust both to develop catalysts with unique selectivites or activites, and to understand the factors which govern these characteristics at both a fundamental and practical level. Olefin metathesis has become an essential reaction for the synthesis of small molecules in addition to polymeric materials. We have pursued two distinct ligand classes based on diaminocarbenes with novel architectures to address specific limitations within this useful class of reactions: 1) limited access to polymeric materials with controlled microstructures and 2) poor stereoselectivity in Ru-catalyzed cross-metathesis (CM) reactions. Numerous phosphines and N-heterocyclic carbenes (NHCs) have been used as ligands for Ru metathesis catalysts, and the resulting activity is very sensitive to their steric and electronic nature. We envisioned that we could take advantage of this dependence by developing a catalyst with tunable ligand donicity. Redox-switchable ligands can lead to catalysts whose selectivity and/or activity are dependent upon the ligand oxidation state. Towards this purpose, we have developed a ligand which incorporates a 1,1’-disubstituted ferrocene moiety into the backbone of a diaminocarbene (FcDAC). Upon ligation of FcDAC to various transition metals, we were able to use cyclic voltammetry and a spectroelectrochemical FT-IR experiment to show electronic communication between FcDAC and the coordinated metal. We then pursued Ru metathesis catalysts incorporating these ligands. The ring-opening metathesis polymerization of 1,5-cyclooctadiene was studied using [(FcDAC)(PPh₃)Cl₂Ru=(3-phenylindenylid-2-ene)] as the catalyst. Chemical redox reactions were used to establish the ability of FcDAC to impart redox-tunable properties to Ru metathesis catalysts. A new ligand class pioneered in our group, N-aryl,N-alkyl acyclic diaminocarbenes (ADCs), was also studied in various Ru metathesis catalysts. To our delight, these catalysts showed lower E : Z ratios than analogous NHC ligands in two representative CM reactions. We also investigated the conformational diversity of these differentially substituted ADCs given their ability to rotate about their C–N bonds, in particular, to determine how this might influence their donicity. Complexes of the type [(ADC)Ir(COD)Cl] and [(ADC)Ir(CO)₂Cl] were studied, given the wealth of structural and spectral data available for analogous compounds incorporating related ligand classes. Different conformations resulted depending on the N-substituents and the nature of the metal complex. Interestingly, the electron donating ability of ADC ligands was found to depend on their conformation, as evidenced by FT-IR and cyclic voltammetry. This established a new avenue for tuning the donor properties of differentially substituted ADC ligands. The unique properties of these novel ligand classes were demonstrated in Ru metathesis catalysts. However, on a broader level, these ligands are expected to have utility in diverse catalytic applications. / text

A major driving force for development of new catalyst systems is the need for more efficient synthesis of chemical compounds essential to modern life. Catalysts having superior performance offer significant environmental and economic advantages, but their discovery is not trivial. Well-defined, homogeneous catalysts can offer unparalleled understanding of ligand effects, which proves invaluable in directing redesign strategies. This thesis work focuses on the design of ruthenium complexes for applications in dinitrogen activation and olefin metathesis. The complexes developed create new directions in small-molecule activation and asymmetric catalysis by late-metal complexes. Also examined are the dual challenges, ubiquitous in catalysis, of adequate interrogation of catalyst structure and performance. Insight into both is essential to enable correlation of ligand properties with catalyst activity and/or selectivity. Improved methods for accelerated assessment of catalyst performance are described, which expand high-throughput catalyst screening to encompass parallel acquisition of kinetic data. A final aspect focuses on direct examination of metal complexes, both as isolated species, and under catalytic conditions. Applications of charge-transfer MALDI mass spectrometry to structural elucidation in organometallic chemistry is described, and the technique is employed to gain insight into catalyst decomposition pathways under operating conditions.