Spelling suggestions: "subject:"optar receiver""
1 |
A 2.5 GHz Optoelectronic Amplifier in 0.18 m CMOSCalvo, Carlos Roberto 24 April 2003 (has links)
The ever-growing need for high speed data transmission is driven by multimedia and telecommunication demands. Traditional metallic media, such as copper coaxial cable, prove to be a limiting factor for high speed communications. Fiber optic methods provide a feasible solution that lacks the limitations of metallic mediums, including low bandwidth, cross talk caused by magnetic induction, and susceptibility to static and RF interferences. The first scientists to work with fibers optics started in 1970. One of the early challenges they faced was to produce glass fiber that was pure enough to be equal in performance with copper based media. Since then, the technology has advanced tremendously in terms of performance, quality, and consistency. The advancement of fiber optic communication has met its limits, not in the purity of its fiber media used to guide the data-modulated light wave, but in the conversion back and forth between electric signals to light. A high speed optic receiver must be used to convert the incident light into electrical signals. This thesis describes the design of a 2.5 GHz Optoelectronic Amplifier, the front end of an optic receiver. The discussion includes a survey of feasible topologies and an assessment of circuit techniques to enhance performance. The amplifier was designed and realized in a TSMC 0.18 µm CMOS process.
|
2 |
Optická linka pro přenos vysokofrekvenčního signálu / RF analog fiber optic linkKelbler, Petr January 2017 (has links)
This thesis analyzes the problem of design analog fiber optic link for transmission high frequency signals. Analog fiber optic link will be used in system for detection and localization a partial discharge activity MOSAD-PD-UHF, where will replace existing solution with coaxial cables, which is not appropriate for highly noise environment. MOSAD-PD-UHF system is developed in department of theoretical and experimental electrical engineering. At the first, MOSAD-PD-UHF system and individual parts of optical chain are theoretical described. In following part are compared a few commercially available analog fiber optic link and design of chosen transmit and receive module are described. . The thesis final part deals with construction of optical link and measured parameters are discussed.
|
Page generated in 0.0572 seconds