Though stratigraphic correlations are abundant in the Cordilleran basin-fill, they rarely include along-strike transects providing a spatio-temporal sense of deformation, sediment-supply and subsidence. A new, high-resolution, regional strike-correlation of the Castlegate Formation reveals progressive northward-growth of the San Rafael Swell during two embryonic episodes of Laramide-style deformation in central Utah. The intrabasinal deformation-events produced gentle lithospheric-folding punctuated by erosional-truncation of upwarped regions. The earliest episode occurred at 78 Ma in the southern San Rafael Swell likely causing soft-sediment deformation and stratal-tilting. Following this the alluvial-plain was leveled and rapid, extensive-progradation took place. A second episode, at 75 Ma, where deformation was focused in the northern San Rafael Swell, also caused sediment-liquefaction and erosional beveling. The stratal-tilting and sediment-liquefaction is attributed to seismicity induced by basal-traction between a subducting flat-slab and continental-lithosphere. The south-to north time-transgression of uplift is spatio-temporally consistent with NE-propagation of an oceanic-plateau subducted shallowly beneath the region.

Granulite-facies orthogneisses of the Mesoproterozoic Albany-Fraser Orogen from the locality of Bremer Bay, in southwestern Australia, record at least three phases of widespread, pervasive NW- and NE-trending bidirectional extension that alternate with shortening and/or shear related structures. Crustal extension occurred ca. 1180 Ma, based on SHRIMP U–Pb zircon geochronology of melts generated during deformation, which coincided with Stage II (1215-1140 Ma) of the Albany-Fraser Orogeny, a period of NW-directed contraction. Eight different deformation phases can be recognized in the Bremer Bay area: (1) formation of a pervasive migmatitic fabric, defined by alternating leucosomes and melanosomes, parallel to the main compositional layering, and axial planar to localized isoclinal folds of cm-wide melt bands; (2) first bidirectional extension phase, which formed cm-scale square boudins of mafic layers parallel to the main migmatitic fabric; (3) formation of open to isoclinal, upright to overturned, SW-plunging, NW-verging m-scale folds of early square and rectangular boudins and dominant migmatitic foliation; (4) renewed coeval NE- and NW-directed extension that produced intermediate (< 1 meter to a few meters) boudins of the migmatitic fabric and compositional layering; (5) formation of regional-scale, NW-verging, SW-plunging overturned folds of all previous structures; (6) third phase of bidirectional extension that formed large, decameter-scale boudins of the migmatitic fabric; (7) late folding phase that resulted in the formation of m-scale open to tight, SW-plunging, upright to moderately overturned, NW-verging folds; and (8) fracturing related to the intrusion of dominantly N-NW- and N-NE-trending intermediate and felsic few cm- to few dm-wide pegmatite veins. Melt generation was concurrent with all stages of deformation. The Albany-Fraser Orogen is reinterpreted as a diachronous orogen, resulting from the closure of the asymmetrically shaped ocean basin between the West Australian and Mawson cratons, which widens considerably from NE to SW along the length of the orogenic front. Subduction on the western side of the orogen was the driving force for NW-directed collision during Stage II of the orogeny. Slab breakoff and orogenic collapse following closure of an intracratonic ocean basin could account for the multiple phases of bidirectional extension, granulite facies metamorphism and pervasive partial melting throughout deformation. / text

published_or_final_version / abstract / Earth Sciences / Doctoral / Doctor of Philosophy

The Collisional Orogeny in the Scandinavian Caledonides (COSC) project aims to provide a deeper understanding of mountain belt dynamics through scientific deep drilling in the central parts of the mountain belt of western Sweden. The main targets include a subduction related allochthon, the basal orogenic detachment and the underlying partially subducted Precambrian basement. Research covered by this thesis, focusing primarily on reflection seismic data, was done within the framework of the COSC project. The 55 km long composite COSC Seismic Profile (CSP) images the upper crust in high resolution and established the basis for the selection of the optimum location for the two 2.5 km deep COSC boreholes. Together with potential field and magnetotelluric data, these profiles allowed the construction of a constrained regional interpretation of the major tectonic units. Non-conventional pseudo 3D processing techniques were applied to the 2D data prior to the drilling of the first borehole, COSC-1, to provide predictions about the 3D geometry of subsurface structures and potential zones of interest for the sampling programs. COSC-1 was drilled in 2014 and reached the targeted depth with nearly complete core recovery. A continuous geological section and a wealth of information from on-site and off-site scientific investigations were obtained. A major post-drilling seismic survey was conducted in and around the borehole and included a 3D reflection seismic experiment. The structurally and lithologically complex Lower Seve Nappe proved difficult to image in detail using standard processing techniques, but its basal mylonite zone and underlying structures are well resolved. The 3D data, from the surface down to the total drilled depth, show good correlation with the initial mapping of the COSC-1 core as well as with preliminary results from on-core and downhole logging.   Good correlation is also observed between the 2D and 3D reflection seismic datasets. These will provide a strong link between the two boreholes and a means to extrapolate the results from the cores and boreholes into the surrounding rock. Ultimately, they will contribute to the deeper understanding of the tectonic evolution of the region, the Scandinavian Caledonides and the formation of major orogens. / Collisional Orogeny in the Scandinavian Caledonides

A thesis submitted to the Faculty of Science, University of the Witwatersrand, in fulfilment of the requirements for the degree of Doctor of Philosophy University of the Witwatersrand School of Geosciences and Dublin Institute for Advanced Studies School of Cosmic Physics Geophysics Section February 2016 / Archean cratons, and the Proterozoic orogenic belts on their flanks, form an integral part of the Southern Africa tectonic landscape. Of these, virtually nothing is known of the position and thickness of the southern boundary of the composite Congo craton and the Neoproterozoic Pan African orogenic belt due to thick sedimentary cover. In this work I present the first lithospheric-scale geophysical study of that cryptic boundary and define its geometry at depth. The results are derived from two-dimensional (2D) and three-dimensional (3D) inversion of magnetotelluric data acquired along four semi-parallel profiles crossing the Kalahari craton across the Damara-Ghanzi-Chobe belts (DGC) and extending into the Congo craton. Two dimensional and three-dimensional electrical resistivity models show significant lateral variation in the crust and upper mantle across strike from the younger DGC orogen to the older adjacent cratons. The Damara belt lithosphere is found to be more conductive and significantly thinner than that of the adjacent Congo craton. The Congo craton is characterized by very thick (to depths of 250 km) and resistive (i.e. cold) lithosphere. Resistive upper crustal features are interpreted as caused by igneous intrusions emplaced during Pan-African magmatism. Graphite-bearing calcite marbles and sulfides are widespread in the Damara belt and account for the high crustal conductivity in the Central Zone. The resistivity models provide new constraints on the southern extent of the greater Congo craton, and suggest that the current boundary drawn on geological maps needs revision and that the craton should be extended further south. The storage possibilities for the Karoo Basins were found to be poor because of the very low porosity and permeability of the sandstones, the presence of extensive dolerite sills and dykes. The obvious limitation of the above study is the large spacings between the MT stations (> 10km). This is particularly more limiting in resolving the horizontal layers in the Karoo basin. However the 1D models provide layered Earth models that are consistent with the known geology. The resistivity values from the 1D models allowed porosity of the Ecca and Beaufort group lithologies to be calculated. It is inferred that the porosities values are in the range 5-15 % in the region below the profile. This value is considered too low for CO2 storage as the average porosity of rock used for CO2 is generally more than 10 to 12 percent of the total rock unit volume.

A dissertation submitted to the Faculty of Science, University of Witwatersrand in the fulfilment of the requirements for the degree of Master of Science. Johannesburg, 2015. / Northwest Botswana holds a key position for the correlation of the Pan-African mobile belts of southern Africa (i.e. the Damara-Zambezi-Lufilian Orogeny). Phanerozoic cover (Kalahari Group) precludes direct correlation between Proterozoic lithologies of the Damara Belt and thick metasedimentary sequences of northwest Botswana. A combination of new geological and geophysical field observations, interpretation of 50 m resolution aeromagnetic data, and 2.2 km resolution gravity data of Namibia and Botswana, have led to the development of a new sub- Kalahari geological map of the Damara Belt and northwest Botswana. The interpretation of potential field and magnetotelluric (MT) data complemented with both new and published geological data, has improved the identification of the northern and southern margins of the Damara Belt and northwest Botswana, and tectonostratigraphic zones within them. In addition, these correlations have established that the northern margin of the Kalahari Craton on geological maps extends further north than previously noted. The northeast trending Damara Belt is confidently traced into northwest Botswana (Ngamiland) to ~19.5°S, 22.0°E. At this location, in map view, aeromagnetically interpreted structures follow a radial distribution from northwest-striking in the west to northeast-striking in the east. The lithostratigraphic units to the north of this location cannot be confidently correlated with lithostratigraphic units of the Damara Belt. Instead, these units are better correlated with lithostratigraphic units in southern Angola and/or Zambia. The southeastern margin of the Damara Belt is in tectonic contact with the northern margin of the Ghanzi-Chobe Belt as identified in the aeromagnetic images. The Ghanzi-Chobe Belt is correlated with the Sinclair Supergroup in the Rehoboth Subprovince in Namibia. The basal Kgwebe volcanics are correlated with the Oorlogsende Porphyry Member and Langberg Formation and the unconformably overlying metasediments of the Ghanzi Group are correlated with the metasediments of the Tsumis Group. The correlations are based on similar aeromagnetic signatures, lithologies, mineralisation and age dates constrained by carbon isotope chemostratigraphy. Physical property measurements were collected on Meso- to Neoproterozoic lithologies of the Damara Belt, northwest Botswana and Zambia. The measurements included hand held magnetic susceptibility measurements on 303 samples and density measurements on 174 samples. The measurements provide one of the largest physical property databases for Namibia, Botswana and Zambia. In general, the sedimentary units have the lowest magnetic susceptibility values of ~0.207 x 10-3 SI units, respectively. The exceptions are the iron formation and diamictite of the Chuos Formation and conglomerate of the Naauwpoort Formation of 15.2 x 10-3 SI units. The iron iii formation ranges in magnetic susceptibility from 3.34 x 10-3 SI units to 92.0 x 10-3 SI units and the diamictite has a magnetic susceptibility of 7.68 x 10-3 SI units. The igneous lithologies have a density and magnetic susceptibility range from 2.58 g.cm-3 to 3.26 g.cm-3 and 0.001 x 10-3 SI units to 11.6 x 10-3 SI units, respectively. The lower values are associated with pegmatites and rhyolites and the higher values are associated with mafic lithologies and magnetite bearing granites (Omangambo, Salem, Sorris-Sorris and Red Granites). The metamorphic lithologies have the widest range of density and magnetic susceptibility values, between 2.61 g.cm-3 and 3.37 g.cm-3, and -0.299 x 10-3 SI units and 49.5 x 10-3 SI units, respectively. The lower values are associated with low grade metamorphic facies of sedimentary origin, and the higher values are associated with high-grade metamorphic facies of an igneous origin. The first upper crustal-scale interpretation of the Southern African MagnetoTelluric EXperiment (SAMTEX) was developed. The results were derived from 1D Occam inversion models, at depth intervals of 1 – 5 km, 1 – 15 km and 1 – 35 km. The MT data were acquired across the semiparallel, north-south striking DMB, NEN and OKA-CAM profiles in the vicinity of the Namibia – Botswana border between 2006 and 2009. Beneath the MT profiles are two zones of enhanced conductivity, a northern and southern zone. The enhanced conductivity of the northern zone (> 100 Ωm) is associated with individual geological bodies. The southern zone forms an elongated belt of enhanced conductivity (> 300 Ωm) at a depth of less than 5 km. This zone of enhanced conductivity is associated with Proterozoic plate boundaries and subduction zones. Three ~350 km long, north-south trending magnetic profiles were 2D forward modelled to investigate the proposed northward subduction of oceanic crust and subsequently a portion of the Kalahari Plate beneath the Congo Craton. Additionally, the folding pattern of the Ghanzi- Chobe Belt was developed. The interpretation of the magnetic models suggests a northward subduction is a possible cause for the evolution of the Damara Orogen with the regionally eastwest striking negative aeromagnetic anomaly, in northern Namibia, being caused by a thick package (~12 km to 20 km) of metasediments with a modelled magnetic susceptibility of 0. 829 x 10-3 SI units. The Damara Orogen has passed through the subduction-collisional transition but did not evolve into a large-hot orogen. Evidence suggests that the Damara Orogen has gone through the transition of subduction of oceanic crust to terrane accretion (speculated to be represented by the Deep-Level Southern Zone and Chihabadum Complex) and continental collision. However, the doubly vergent wedges did not evolve into an orogenic plateau completing the transition from a small-cold orogen to a large-hot orogen. This is similarly observed in the Alps Orogeny.

La ceinture orogénique de Longmenshan (LMTB) constitue la frontière orientale du plateau tibétain, qui est reconnue par sa topographie escarpée, son activité tectonique intensive ainsi ses la complexité de ses structures. Comme une orogène typique, le LMTB a subi une forte déformation intracontinentale au cours du Mésozoïque. Ainsi, la connaissance sur l’évolution tectonique du Mésozoïque de la LMTB est cruciale pour comprendre l’orogenèse intracontinentale et la surrection du plateau tibétain. Une ceinture de clivage verticaux divise la LMTB en une zone occidentale et une orientale. La Zone orientale présente un top-to-SE cisaillement tandis que la zone occidentale présente un top-to-NW cisaillement. La zone orientale peut être subdivisée en quatre sous-unités avec de foliations orientées du SE au NW. Le granite syntectonique et les données géochronologiques contraignent cette déformation principale au Mésozoïque inférieur (environ 219 Ma). L’analyse structurale, l’AMS, l’étude microstructurale et la modélisation gravimétrique sur le complexe de Pengguan, l’un des complexes de l’orogène néoprotérozoïques au milieu de segment de la LMTB), révèlent une structure des slices du socle imbriquées de la LMTB et la zone adjacente. Les âges connus, l’exhumation rapide localisée et la subsidence du bassin flextual suggèrent que les slices du socle sont imbriquées au cours du Mésozoïque supérieur (166-120 Ma). La LMTB se trouve loin de la limite de la plaque contemporaine, et est absence de matériel ophiolitique, donc elle peut être considéré comme une orogène intracontinentale. Pendant le début du Mésozoïque, le Yangtze plate subductait vers l’ouest en fermant l’océan paléo-Téthys. Cette tectonique a exhumé des matériaux de différentes profondeurs en surface par des chevauchements vers le SE et chevauchements arrières vers le NW. Au cours de la fin du Mésozoïque, le socle a été soulevé davantage en raison de la collision entre les blocs de Lhasa et de l’Eurasie, qui a conduit à une imbrication des slices du socle et épaissi la croûte. / The Longmenshan Thrust Belt (LMTB), constituting the eastern boundary of the Tibetan Plateau, is well known by its steep topography, intensive tectonic activities and the complicated structures. As a typical composite orogen, the LMTB experienced extensive intracontinental deformation during the Mesozoic. The knowledge on the Mesozoic tectonic evolution of the LMTB therefore is crucial to understand the intracontinental orogeny and uplifting of the Plateau. The vertical cleavage belt divides the LMTB into a Western Zone and an Eastern Zone. The Eastern Zone displays a top-to-the-SE shearing while the western zone a top-to-the-NW shearing. The Eastern Zone can be further divided into four subunits with foliations deepening from SE to NW. The syntectonic granite and published geochronologic data constrain this main deformation to the Early Mesozoic around 219 Ma. Structural analysis, AMS and microstructural study and gravity modeling on the Pengguan complex, one of the orogen-parallel Neoproterozoic complexes located in the middle segment of the LMTB, reveal a basement-slice imbricated structure of the LMTB and adjacent areas. Published ages, localized fast exhumation rate and flexural subsidence of the foreland basin suggest that the basement-slices imbricated southeastwards during Late Mesozoic (166-120 Ma). The LMTB is far away from the contemporaneous plate boundary and devoid of ophiolite-related material, therefore, it is supposed to be an intracontinental orogen. During the Early Mesozoic, the Yangtze basement underthrusted westwards due to the far-field effect of the Paleo-Tethys’ obliteration, and the materials in different structural levels have been exhumated to the surface by southeastward thrusting and contemporaneous backward thrusting. During the Late Mesozoic, the basement is further underthrusted due to the collision between the Lhasa and Eurasia blocks, which led to SE-ward imbrication of the basementslices that may thicken the crust.

The well-known high species richness of the tropical forests is not uniform through its different regions; Africa is species-poor when compared to Southeast Asia and the Neotropical region. One of the hypotheses for differences between the richness in the Neotropics and Africa points to the importance of recent speciation in the Neotropics. This is considered in particular in Andean-centred taxa that probably diversified in response to the opportunities for speciation offered by the final uplift of the tropical Andes (during the past c. 25 million years [Ma] to the present, with higher rates on the past 10 Ma to the present). The aim of this thesis is to test this hypothesis in the genus Renealmia L.f. (Zingiberaceae), an Andean centred lineage (c. 64 Neotropical spp.) that also occurs in Africa (c. 17 spp.). A taxonomic account of the Colombian species (c. 32; the country with the most species) is presented, and three species new to science were discovered and are described in an updated revision. I designed a new approach for obtaining nuclear phylogenetic markers for estimating species-level phylogenies using transcriptomes for recent diversification that could be applied to samples from herbarium specimens. I generated de-novo transcriptomes for two Renealmia species and a relative in the subfamily Alpinioideae that were combined with data available in repositories to target low copy number and potentially orthologous genes with short introns. I obtained sequence data for eight introns (ranging from 219 to 924 bp) and an rRNA (ITS1 & ITS2) marker for 40 species and at least one marker for 64 species, comprising a total of 137 accessions of which 67.9%(93) were sampled from herbarium specimens. Gene and species-trees were estimated for the genus. I found that most of the subgroups based on morphological characters are supported by the molecular data but a possible combination of incomplete lineage sorting (related to recent radiations or large population sizes) and/or introgression through hybridisation makes difficult to solve the relationships among these subgroups. Finally I estimated and compared diversification rates of the Neotropical and African lineages using dated phylogenies based on the trees estimated. I used available and customized methods that take into account incomplete taxon sampling, the uncertainty in the phylogenetic relationships and the stochasticity inherent to diversifications processes. Differences in diversification rates between Africa and the Neotropics indicate increased speciation attributable to the Andean orogeny in the Neotropical lineages of Renealmia.

Near Burlington, Vermont, the Champlain Thrust fault placed massive Cambrian dolostones over calcareous shales of Ordovician age during the Ordovician Taconic Orogeny. Although the Champlain Thrust has been studied previously throughout the Champlain Valley, the architecture and structural evolution of its fault zone have never been systematically defined. To document these fault zone characteristics, a detailed structural analysis of multiple outcrops was completed along a 51 km transect between South Hero and Ferrisburgh, Vermont. The Champlain Thrust fault zone is predominately within the footwall and preserves at least four distinct events that are heterogeneous is both style and slip direction. The oldest stage of structures—stage 1—are bedding parallel thrust faults that record a slip direction of top-to-the-W and generated localized fault propagation folds of bedding and discontinuous cleavages. This stage defines the protolith zone and has a maximum upper boundary of 205 meters below the Champlain Thrust fault surface. Stage 2 structures define the damage zone and form two sets of subsidiary faults form thrust duplexes that truncate older recumbent folds of bedding planes and early bedding-parallel thrusts. Slickenlines along stage 2 faults record a change in slip direction from top-to-the-W to top-to-the-NW. The damage zone is ~197 meters thick with its upper boundary marking the lower boundary of the fault core. The core, which is ~8 meters thick, is marked by the appearance of mylonite, phyllitic shales, fault gouge, fault breccia, and cataclastic lined faults. In addition, stage 3 sheath folds of bedding and cleavage are preserved as well as tight folds of stage 2 faults. Stage 3 faults include thrusts that record slip as top-to-the-NW and -SW and coeval normal faults that record slip as top-to-the-N and -S. The Champlain Thrust surface is the youngest event as it cuts all previous structures, and records fault reactivation with any top-to-the-W slip direction and a later top-to-the-S slip. Axes of mullions on this surface trend to the SE and do not parallel slickenlines. The Champlain Thrust fault zone evolved asymmetrically across its principal slip surface through the process of strain localization and fault reactivation. Strain localization is characterized by the changes in relative age, motion direction along faults, and style of structures preserved within the fault zone. Reactivation of the Champlain Thrust surface and the corresponding change in slip direction was due to the influence of pre-existing structures at depth. This study defines the architecture of the Champlain Thrust fault zone and documents the importance of comparing the structural architecture of the fault zone core, damage zone, and protolith to determine the comprehensive fault zone evolution.

The Prospect Rock Fault (PRF) is key to our understanding of the regional tectonic evolution of Vermont during the Taconic, Salinic, and Acadian Orogenies, and may have played an important role in the exhumation of blueschist and eclogite-facies rocks in the Tillotson Peak Complex (TPC) during the Taconic Orogeny. The TPC is in the footwall of the PRF in the eastern limb of the Green Mountain Anticlinorium. In the TPC, the dominant foliation is S2 and E-W trending F2 folds parallel L2 stretching lineations, which trend orthogonal to regional N-S trending folds associated with the Taconic Orogeny. The PRF itself is folded by F2 folds. Presently, there is a lack of consensus about the role of the PRF in the exhumation of the TPC, and studies have not reconciled the formation of the E-W folds and lineations to a regional model. Oriented samples and structural data were collected from the footwall of the PRF over several transects. Samples were processed into orthogonal thin sections for microstructural analyses and for 40Ar/39Ar step heating of white mica. The dominant foliations in the PRF samples were identified through microstructural analysis and correlating the age of deformation as S2 and S3. These were defined in thin section by mica and quartz microlithons, and oriented mica grains. S1, and in some samples S2, are locally preserved in some mica domains and albite/garnet inclusion trails. S4 appears as crenulations of S3, with no significant new mineral crystallization. In the field, L2 and L3 lineations are defined by mineral and quartz rods, and L4 lineations are defined as intersection lineations on S2 surfaces. 40Ar/39Ar analyses yielded plateau ages ranging from 458.6 ± 2.0 Ma to 419.0 ± 2.4 Ma (1σ). The oldest plateau ages are just slightly younger, yet concordant, with published and new 40Ar/39Ar ages from the TPC and come from the structurally highest portions of the footwall in the northern part of the study area. Virtually all apparent age spectra show age gradients. Results from this study suggest the PRF played a role in exhumation of the TPC and ages obtained are closely aligned with deformation ages constrained from 40Ar/39Ar dating in southern Quebec for the Taconic D2 and Salinian D3 deformation. These dates may aid correlatation of ages and structures regionally and further refining of tectonostratigraphic models describing southern Quebec and New England.