Experiments were carried out in fall and winter, 1990 and spring and summer, 1991 , to determine growth and mortality of juvenile Pacific oysters {Crassostrea gigas) in effluent from cultured coho salmon {Oncorhynchus kisutch) , and effluent from salmon in which the red macroalga Palmaria mollis was cultured. Ambient sea water from Yaquina Bay was used as a control. Juvenile Manila clams {Tapes japonica) were also tested in summer, to compare the growth response of clams with that of Pacific oysters. Measured growth parameters included: increase in mean individual live weight, specific growth rate (% increase of mean live weight per day) and mean individual organic (ash-free) weight. Temperature, chlorophyll a, phaeopigment, carbon and nitrogen concentrations and C/N ratio for all treatments were also recorded during spring and summer, 1991. The oysters grew significantly faster in effluent from salmon and salmon conditioned by macroalgae than in the control during the Fall Experiment (September 7- 0ctober 31, 1990). Mean water temperature was 13-16°C. Growth rates were significantly greater in oysters cultured in salmon effluent than in the control during the Winter Experiment (December 7, 1990-February 15, 1991). However, growth was very poor due to low water temperatures (7-10°C). Growth of oysters was significantly greater in the control than in effluent from salmon and salmon conditioned by macrolagae in the Spring Experiment (March 7-May 24, 1991). Mean water temperature was 12°C. In the Summer Experiments, (June 3-July 4 and July 19-August 17, 1991) growth of oysters was more rapid in treatments with macroalgae as compared to treatments without macroalgae Comparative experiments with juvenile Manila clams gave similar results. Percentage mortality for both oysters and clams ranged from 0 to 5% and was highest during winter and lowest during summer. Mean chlorophyll values ranged from 1 μg/1 in spring, 1991 to 11 μg/1 summer, 1991. / Graduation date: 1992

The purpose of this study is to investigate the hydrodynamic properties of an oyster floating raft system under environmental loadings. The floating raft system is an important facility for raising oyster in the near shore area of Tainan, Taiwan. The reasons for this kind of oyster culture being main income source for local fish farmers are as the following features: (1) low cost for the farming system, (2) easily to be installed in the field, and (3) easily to be harvested. Due to the raft structure could not withstand the impact of heavy storms; most of the oyster rafts are towed into harbor to avoid damage before the onset of typhoon. Since some unexpected violent sea states may occur and severely affect the integrity of raft system, the investigation of the hydrodynamic properties of a floating raft system is essential for oyster culture in the open sea. This study includes two parts: numerical simulation and physical modeling. In numerical simulation, a lumped mass method with a Morison type of relative motion equation are adopted to calculate the drag and inertial forces on raft components and then are equally divided to the associated nodes to form a system of motion equations based on Newton¡¦s second law. Through the fourth-order Runge-Kutta method, the dynamic performance of the oyster raft system can be obtained. To verify the numerical model, a physical model was carried out in a wave tank (35x1x1.2 m), and the results of dynamic performance of numerical model show good agreement with measurements. A case study of an in situ oyster farming system located near-shore of Tainan region is analyzed by the developed numerical model to investigate the maximum mooring tension, the optimal gap between rafts, and the required length of mooring line. These specifications are crucial to the shell fish farmers for their floating raft system to be survived in the strong currents and waves. The results showed that the optimum configuration for a raft system generated the lowest mooring tension is as the follows: the space between oyster rafts is about a length of oyster raft; the length of mooring line is three times of the water depth, which is consistent with the present practice of shell fish farmers adopting 3~4 times of water depth; the appropriate embedment anchor weight is 70 kg but the anchorage should be the type used by the farmers in Penghu county. Finally, this work intends to offer a guideline for the installation of oyster raft systems in the field, and anticipate minimizing the damage during the unexpected heavy sea states.

There are four types of oyster aquaculture such as oyster plug rod, horizontal hanging scaffold, pontoon-style longline, and floating raft system. This study is to investigate the mooring tension of an oyster floating raft system under environmental loadings. According to the hydrodynamic experimental test, the horizontal fluid velocity has a retarded phenomenon when encountering the front part of structure, and then gradually reduces to a stable situation after the second floating rod. The phenomenon is identified as shielding effect for the raft system and has been used as a shielding coefficient to modify the fluid velocity in the computation program. The dynamic analysis of floating raft system under random wave interaction is investigated numerically and experimentally. The lumped mass method is applied to divide the structure into many nodes and elements. A modified Morison equation dealing with moving structure components is used to calculate the environmental forces on the elements. Further, the forces on elements are divided equally into neighboring nodes to form the equation of motion based on Newton¡¦s second law. Finally, the 4th-order Runge-Kutta (RK4) method is used as a time marching scheme to predict the displacement and velocity of nodes for the next time step. The results of time series and spectrum analysis of mooring tension show good agreement between numerical predictions and experimental data. This paper has further expanded to predict the field oyster raft system in an open sea, and offers some useful information to the oyster farmers in terms of improving the structure safety.

Offshore culture becomes the most attractive industry in last decades because of overfishing and excessively pumping groundwater causing land subsidence social problems. Oyster culture is one of offshore culture with several advantages such as easy set-up and without feeding cost. In this study, we focus on a longline-style oyster aquaculture system because it is recyclable, high growing efficiency and advanced technique against traditional tidal flat culture. This study establishes a numerical model through a lumped mass method, then employs fourth order Runge-Kutta method to solve the system of motion equations and evaluates the tension on the anchor rope. The results show the discrepancy between the numerical model and experimental data is lower than 4% in current-only situation, and similarly in wave-only situation the discrepancy is lower than 6%. The comparison results indicate that the numerical model is capable to predict the environmental loadings on longline-style oyster culture system. An in-situ case study of a longline-style oyster aquaculture system via regular and random waves, located in the Penghu Bay, is investigated based on the sea-state, Chebi Typhoon occurred in June, 2001, causing a catastrophic damage to the cage aquaculture. The conclusions of dynamic responses of the case study may be utilized as guidance for the local oyster farmers to build and protect their oyster culture system in the Bay.

Abstract This research is to develop a new compound cage system that not only has the benefit of the traditional cage system but also has a series of oyster containers hanged on the circumference of the floating collar to add economic value to the cage aquaculture industry. The purpose of this study is to investigate the cage net deformation rate and the maximum mooring tension at the anchor under three types of Liuchiu sea states. The results of numerical simulation could be used as valuable guide for fish farmers and aquacultural cage designers. The developed numerical method is based on a lumped-mass approach to build a system of motion equations, and then utilizes the fourth order Runge-Kutta method to solve the motion equations. The numerical results reveal that under regular wave conditions, the cage net deformation rate for the compound cage system is slightly less than that of the traditional cage system, but the maximum mooring tension has reversed effect, i.e., the compound cage system has higher mooring tension than that of traditional one. As for the cases of irregular waves, the numerical results indicate that the cage net deformed so seriously that the fish can¡¦t survived at the sea condition of typhoon 50-year return period. To overcome this net shrinkage problem, an improved scheme is necessary to be implemented before a real compound cage system is installed in the open sea.

Copano Bay is a shallow (< 2-3 m), microtidal estuary in south central Texas. In an effort to both determine the distribution as well as investigate the controls on the distribution of oyster reefs, a geophysical survey of Copano Bay was conducted in June and July 2007. Surficial sediment analysis confirms that the recent sedimentation in Copano Bay is comprised of mostly estuarine mud with little sand or shell, large extents of oyster reefs and smaller areas of sand. Seismic stratigraphy analyses verify that the first oyster reefs in Copano Bay formed atop topographic highs in the Pleistocene surface. About 6 ka, sea level rise slowed to near its present rate and sediment supply decreased tremendously to Copano Bay decreasing the amount of suspended sediment. The first oyster reefs began forming around this time using these fluvial terraces as suitable substrate. Once the initial reefs were established, additional reefs began forming atop these initial reefs, or on the eroded shell hash material from the initial reefs. During this time of slow sea level rise and low sediment input to the bay, oyster reefs thrived and reef and shell hash material covered a majority of the bay surface. Once climate change increased sediment input to the bay, the reefs began to decrease in size due to siltation. The reefs have continued to decrease in size causing a 64 percent reduction in oyster reef and shell hash area from approximately 4.8 ka to today.

The genetic structure of oyster drill Thais clavigera along the west coast of Taiwan were assayed by starch gel electrophoresis. Factors of locality¡]i.e. Shainsan, Taisi, Budai, Chiku¡^,maturity¡]i.e. mature, immature¡^ and sampling time¡]i.e.1999.7~2000.3, 2000.11¡^ were analyzed to evaluate their effect on drill¡¥s genetic structure . Four of the eleven investigated enzyme loci were polymorphic , i.e. Ark, Lap-1, Lap-2, and Pgm-1. Among the four populations , the mean heterozygosity¡]H¡^and genetic distances¡]D¡^ ranged from 0.100 to 0.129 and from 0.0005 to 0.0029, respectively. Therefore, T. clavigera along the west coast of Taiwan belongs to the same population. However, differentiation among populations still existed which was contributed by Ark locus. According to the degree of differentiation, the four populations were ranked as Shainsan¡BBudai¡BTaisi and Chiku . A similar trend was also observed in the four populations, as the drill size increased, the mean heterozygosity and the heterozygosity of Ark locus increased. Sampling time had no significant effect on genetic structure of populations. It is suggested that environmental factors¡]e.g. environmental quality and topography¡^and drill¡¦s reproductive ecology may be important in determining the genetic structure of populations.

This study is the first attempt to investigate heavy metal concentrations in the soldier crab with a view to it being a potential candidate for the monitoring of copper(Cu), zinc(Zn), nickel(Ni), lead(Pb) and cadmium(Cd) levels on the western coast of Taiwan. The objectives of this investigation included the following: (1) to assess the pollution status at different sites by determining the metal concentrations of ambient water and Pacific oysters; (2) to monitor the concentrations of heavy metals, including Cu, Zn, Ni, Pb and Cd, in the soldier crab; (3) to assess the effect of sex, wet weight and reproductive season at different sites¡F(4) to investigate the distribution of metal concentration among carapace, gonads, midgut gland, muscle; and (5). to assess the pollution status at different sites and years by monitoring the concentration of heavy metals, including Cu, Zn, Pb and Cd in male soldier crabs The Pacific oyster and stream results proved that site B is contaminated by Cu, Zn and Pb from streams B-1 and B-2. The highest Cu, Zn, Ni and Pb concentrations in soldier crabs appeared at site B, and significant differences in the accumulated concentrations of Cu, Pb, Zn and Ni in soldier crabs were found between the sites tested. The highest bioconcentration factors of Cu, Zn, Ni and Pb in soldier crabs appeared at site B, indicating that the soldier crab can accumulate Cu, Zn and Pb to the same degree as the Pacific oyster. In fact, soldier crabs can accumulate more Ni than Pacific oysters, better reflecting the conditions of the ambient environment. These phenomena, as well as the fact that the soldier crab is able to accumulate relatively high levels of Cu, Zn, Pb and Ni, suggest that this crab is a potential biomonitor of Pb and Ni pollution in aquatic ecosystems. Only in the case at site A of Pb sex related difference could be detected. In general mean Pb level in male soldier crabs were higher than in female. There are no significant sex related differences of Cu, Zn, Cd and Ni in soldier crab among three sites. The lead mean concentration in reproduction season and pre- reproduction season were higher than non-reproduction seasons. The highest concentrations of lead were found in carapace and the gonad in reproduction season. The results presented that the metal concentration in soldier crabs vary significantly not only because of season change in polluted sites, but also it may be influenced by the sex-related and size-related difference of organisms. After eliminating size effect, sex effect by analyzing 0.7 g~ 1.0 g and male soldier crabs to monitor the pollution status, the Cu and Zn concentrations in soldier crabs along the Changhua coastline(site A and site B) is stable¡F The higher concentrations of Pb and Cd in soldier crabs existed in 2002 and 2003. We suggested that the polluted sources of Pb and Cd along the Changhua coastline in 2002 is abundant, and of Pb contents from 2003 to 2006 and Cd content from 2003 to 2007 are decreasing. Therefore, it is essential to take size effect, sex, season, and polluted status into account in comparative biomonitoring studies using soldier crabs as metals biomonitor. The baseline concentration of soldier crabs were 21.4 £gg g-1 wet wt. Cu, 20.1 £gg g-1 wet wt. Zn, 0.13 £gg g-1 wet wt. Pb, 0.12 £gg g-1 wet wt. and 0.91 £gg g-1 wet wt..

Thesis (M.S.)--University of North Carolina Wilmington, 2009. / Title from PDF title page (February 17, 2010) Includes bibliographical references (p. 63-67)

Thesis (M.S.)--University of North Carolina at Wilmington, 2003. / Includes bibliographical references (leaves : [45]-52).