In this paper, we analytically describe the parametric amplification in ring resonators using silicon and silicon nitride waveguides. Achievable gain and bandwidth of the ring-based amplifiers are studied taking into account the Kerr nonlinearity for silicon nitride and Kerr nonlinearity as well as two photon absorption and free carrier absorption for silicon waveguides. Both telecom and 2-μm wavelengths are investigated in case of silicon. An approach for obtaining the optimum amplifier design without initiating the comb generation has been introduced. It is shown that there is a trade-off between the input pump and amplifier bandwidth. It is estimated that using optimum designs an amplifier with a gain and bandwidth of 10 dB and 10 GHz could be feasible with silicon ring resonators in 2 μm.

All-optical signal processing techniques for phase-shift keyed (PSK) systems were developed theoretically and demonstrated experimentally. Nonlinear optical effects in fibers, in particular four-wave mixing (FWM) that occurs via the ultra-fast Kerr nonlinearity, offer a flexible framework within which numerous signal processing functions can be accomplished. This research has focused on the regenerative capabilities of various FWM configurations in the context of processing PSK signals. Phase-preserving amplitude regeneration, phase regeneration, and phase-regenerative wavelength conversion are analyzed and demonstrated experimentally. The single-pump phase-conjugation process was used to regenerate RZ-DPSK pulse amplitudes with different input noise distributions, and the impact on output phase characteristics was studied. Experiments revealed a limited range over which amplitude noise could effectively be suppressed without introduction of phase noise, particularly for signals with intensity pattern effects. Phase regeneration requires use of phase-sensitive amplification (PSA), which occurs in nonlinear interferometers when the pump and signal frequencies are degenerate (NI-PSA), or in fiber directly through single-stage (degenerate) or cascaded (non-degenerate) FWM processes. A PSA based on a Sagnac interferometer provided the first experimental demonstration of DPSK phase and amplitude regeneration. The phase-regenerative capabilities of the NI-PSA are limited in practice by intrinsic noise conversion (amplitude to phase noise) and to a lesser extent by the requirement to modulate the pump wave to suppress stimulated Brillouin scattering (SBS). These limitations are relaxed in novel materials with higher SBS thresholds and nonlinearities. Degenerate FWM provides PSA in a traveling-wave configuration that intrinsically suppresses the noise conversion affecting the NI-PSA, while providing stronger phase-matched gain. Experiments confirmed superior phase-regenerative behavior to the NI-PSA with simultaneous reduction of amplitude noise for NRZ-DPSK signals. Phase-regenerative wavelength conversion (PR-WC) provides the regenerative properties of PSA at a new wavelength, and was proposed and demonstrated for the first time in this research. The parallel implementation of two FWM processes, phase-conjugation and frequency conversion, provides two idlers which exhibit interesting and useful regenerative properties. These were investigated theoretically and experimentally. Ideal phase-regenerative behavior is predicted when the contributing FWM processes are equally phase-matched, which can be maintained over any interaction length or wavelength shift provided the pump powers are properly adjusted. Depleted-pump regime PR-WC provides simultaneous phase and amplitude regeneration. Experiments confirmed regenerative behavior for wavelength shifts of the idlers up to 5 nm. Two techniques for phase regeneration of 4-level PSK signals were developed and evaluated. The first is based on parallel operation of PSAs suitable for processing 2-level PSK signals, where phase projection and regeneration are combined to recover the input data. Analysis of this scheme outlined the conditions required for effective phase regeneration and for practical implementation using known PSAs. A novel process based on FWM (parallel phase-conjugation followed by PSA) was developed and analyzed, and demonstrated using numerical simulations. These studies provide a basis for further work in this area.

In this thesis, we report the observations of optical squeezing from second harmonic generation (SHG), optical parametric oscillation (OPO) and optical parametric amplification (OPA). Demonstrations and proposals of applications involving the squeezed light and electro-optic control loops are presented. ¶ In our SHG setup, we report the observation of 2.1 dB of intensity squeezing on the second harmonic (SH) output. Investigations into the system show that the squeezing performance of a SHG system is critically affected by the pump noise and a modular theory of noise propagation is developed to describe and quantify this effect. Our experimental data has also shown that in a low-loss SHG system, intra-cavity nondegenerate OPO modes can simultaneously occur. This competition of nonlinear processes leads to the optical clamping of the SH output power and in general can degrade the SH squeezing. We model this competition and show that it imposes a limit to the observable SH squeezing. Proposals for minimizing the effect of competition are presented. ¶ In our OPO setup, we report the observation of 7.1 dB of vacuum squeezing and more than 4 dB of intensity squeezing when the OPO is operating as a parametric amplifier. We present the design criteria and discuss the limits to the observable squeezing from the OPO.We attribute the large amount of squeezing obtained in our experiment to the high escape efficiency of the OPO. The effect of phase jitter on the squeezing of the vacuum state is modeled. ¶ The quantum noise performance of an electro-optic feedforward control loop is investigated. With classical coherent inputs, we demonstrate that vacuum fluctuations introduced at the beam splitter of the control loop can be completely cancelled by an optimum amount of positive feedforward. The cancellation of vacuum fluctuations leads to the possibility of noiseless signal amplification with the feedforward loop. Comparison shows that the feedforward amplifier is superior or at least comparable in performance with other noiseless amplification schemes. When combined with an injection-locked non-planar ring Nd:YAG laser, we demonstrate that signal and power amplifications can both be noiseless and independently variable. ¶ Using squeezed inputs to the feedforward control loop, we demonstrate that information carrying squeezed states can be made robust to large downstream transmission losses via a noiseless signal amplification. We show that the combination of a squeezed vacuum meter input and a feedforward loop is a quantum nondemolition (QND) device, with the feedforward loop providing an additional improvement on the transfer of signal. In general, the use of a squeezed vacuum meter input and an electro-optic feedforward loop can provide pre- and post- enhancements to many existing QND schemes. ¶ Finally, we proposed that the quantum teleportation of a continuous-wave optical state can be achieved using a pair of phase and amplitude electro-optic feedforward loops with two orthogonal quadrature squeezed inputs. The signal transfer and quantum correlation of the teleported optical state are analysed. We show that a two dimensional diagram, similar to the QND figures of merits, can be used to quantify the performance of a teleporter.

Pagrindinis šios disertacijos tikslas – sukurti efektyvius trijų ir keturių bangų sąveikomis paremtus metodus ultratrumpiesiems ultravioletinės (UV), artimosios bei vidurinės infraraudonosios (IR) spektro srities impulsams generuoti. Pademonstruota efektyvi Nd:stiklo lazerio harmonikų generacija nekolinearaus keturbangio skirtuminio dažnio žadinimo metodu izotropinėse terpėse. Disertacijoje taip pat eksperimentiškai ir teoriškai nagrinėjama galimybė stiprinti 10 fs trukmės UV impulsus. Pateikėme du metodus derinamo bangos ilgio IR impulsams generuoti naudojant komercinę Ti:safyro lazerio ir nekolinearaus optinio parametrinio stiprintuvo sistemą. Pirmasis metodas remiasi keturių bangų sąveikomis ir leidžia generuoti 20 μJ energijos, <30 fs trukmės impulsus 1−1.5 μm spektro ruože. Antrojo šaltinio veika remiasi skirtuminio dažnio generacijos bei optinio parametrinio stiprinimo sąveikomis BBO kristaluose. Sukurtas stiprintuvas, generuojantis dviejų optinių ciklų trukmės, stabilios gaubtinės fazės, 2 μm bangos ilgio impulsus ir pademonstruotas jo taikymas itin plataus spektro superkontinuumo generacijai plačios draustinės juostos kietojo kūno terpėse. Galiausiai, ištirta vienalaikė trečiosios harmonikos ir superkontinuumo generacija skaidriose dielektrinėse terpėse, bei pasiūlyta netiesinio f-3f interferometro schema impulso gaubtinės fazes fliuktuacijoms matuoti. / In this thesis we investigated and developed three- and four-wave interaction-based frequency conversion methods for ultrashort pulse generation in the ultraviolet (UV), near and mid-infrared (IR) spectral ranges. In particular, efficient generation of Nd:glass laser harmonics was demonstrated experimentally, through noncollinear four-wave difference-frequency mixing in isotropic media. Also, broadband optical parametric amplification in the UV was investigated theoretically and achieved experimentally. The results suggest, that pulses as short as 10 fs could be amplified. We have also developed two methods based on three- and four-wave mixing, that extend the tuning range of a commercial Ti:sapphire laser-NOPA system in the IR. The first method relies on four wave frequency down-conversion, and can achieve up to 20 μJ, sub-30-fs pulses tunable in the 1−1.5 μm range. The second method considers frequency conversion, based on difference frequency generation and optical parametric amplification in BBO crystals. The presented setup delivers two optical-cycle, carrier-envelope phase (CEP)-stable pulses at 2 μm. And finally, we demonstrated supercontinuum generation by filamentation of 20 fs pulses at 2 μm in wide-bandgap solids in the regime of anomalous group velocity dispersion. We also proposed the practical use of intrinsic third harmonic generation, for the CEP stability measurements.

In this thesis we investigated and developed three- and four-wave interaction-based frequency conversion methods for ultrashort pulse generation in the ultraviolet (UV), near and mid-infrared (IR) spectral ranges. In particular, efficient generation of Nd:glass laser harmonics was demonstrated experimentally, through noncollinear four-wave difference-frequency mixing in isotropic media. Also, broadband optical parametric amplification in the UV was investigated theoretically and achieved experimentally. The results suggest, that pulses as short as 10 fs could be amplified. We have also developed two methods based on three- and four-wave mixing, that extend the tuning range of a commercial Ti:sapphire laser-NOPA system in the IR. The first method relies on four wave frequency down-conversion, and can achieve up to 20 μJ, sub-30-fs pulses tunable in the 1−1.5 μm range. The second method considers frequency conversion, based on difference frequency generation and optical parametric amplification in BBO crystals. The presented setup delivers two optical-cycle, carrier-envelope phase (CEP)-stable pulses at 2 μm. And finally, we demonstrated supercontinuum generation by filamentation of 20 fs pulses at 2 μm in wide-bandgap solids in the regime of anomalous group velocity dispersion. We also proposed the practical use of intrinsic third harmonic generation, for the CEP stability measurements. / Pagrindinis šios disertacijos tikslas – sukurti efektyvius trijų ir keturių bangų sąveikomis paremtus metodus ultratrumpiesiems ultravioletinės (UV), artimosios bei vidurinės infraraudonosios (IR) spektro srities impulsams generuoti. Pademonstruota efektyvi Nd:stiklo lazerio harmonikų generacija nekolinearaus keturbangio skirtuminio dažnio žadinimo metodu izotropinėse terpėse. Disertacijoje taip pat eksperimentiškai ir teoriškai nagrinėjama galimybė stiprinti 10 fs trukmės UV impulsus. Pateikėme du metodus derinamo bangos ilgio IR impulsams generuoti naudojant komercinę Ti:safyro lazerio ir nekolinearaus optinio parametrinio stiprintuvo sistemą. Pirmasis metodas remiasi keturių bangų sąveikomis ir leidžia generuoti 20 μJ energijos, <30 fs trukmės impulsus 1−1.5 μm spektro ruože. Antrojo šaltinio veika remiasi skirtuminio dažnio generacijos bei optinio parametrinio stiprinimo sąveikomis BBO kristaluose. Sukurtas stiprintuvas, generuojantis dviejų optinių ciklų trukmės, stabilios gaubtinės fazės, 2 μm bangos ilgio impulsus ir pademonstruotas jo taikymas itin plataus spektro superkontinuumo generacijai plačios draustinės juostos kietojo kūno terpėse. Galiausiai, ištirta vienalaikė trečiosios harmonikos ir superkontinuumo generacija skaidriose dielektrinėse terpėse, bei pasiūlyta netiesinio f-3f interferometro schema impulso gaubtinės fazes fliuktuacijoms matuoti.

Main objective of this thesis is to generate and amplify few cycle pulses in the infrared region. In this thesis, two approaches were introduced for few cycle pulse parametric amplification at 800 nm and 1.5 μm. First approach is dedicated for prospects for increasing average power of OPCPA via multi-beam pumping; the second approach is dedicated for generation of carrier-envelope-phase (CEP) stable high energy (up to tens of millijoules) few-cycle pulses at 1.5 μm. An experimental investigation of two or three beams-pumped OPCPA system based on type I BBO crystal is presented. The 2nd OPA stage was pumped by two or three pump beams derived from independent Nd:YAG laser amplifiers. The efficiency of interaction was shown to be comparable to that of single-beam pumped OPA and diminishes only slightly due to cascaded parametric diffraction of interacting waves. The effect was observed and its impact on efficiency of parametric amplification process was shown to decrease at larger intersecting angles of pump. In the prospect, the use of multiple lasers for OPA pumping has an appeal for increasing the repetition rate and consequently the average power of an ultrashort pulse laser system. Finally, the concept and realization of hybrid system based on type II KTP OPCPA and filamentation are described. A CEP-stable 1.5 μm OPCPA system with pulse energies up to 12.5 mJ after 4 OPA stages is demonstrated. Furthermore, self-compression of CEP-stable 2.2 mJ, 74.4 fs, 1.57 μm input... [to full text] / Disertacijos darbo tikslas – suformuoti ir parametriškai stiprinti kelių optinių ciklų trukmės impulsus infraraudonojoje srityje Šioje disertacijoje buvo tirtos dvi moduliuotosios fazės („čirpuotų“) impulsų parametrinio stiprinimo sistemos, stiprinančios ypač plataus spektro impulsus 800 nm bei 1,5 μm srityse. Pirmoji sistema skirta tirti galimybę didinti lazerinės spinduliuotės vidutinę galią keliais pluoštais kaupinamame parametriniame stiprintuve; antroji sistema skirta kelių optinių ciklų trukmės stabilios fazės impulsų formavimui 1,5 μm srityje. Disertacijoje aprašomas I tipo parametrinis stiprintuvas, kurio 2-oji pakopa buvo kaupinama dviem arba trimis nepriklausomų lazerinių šaltinių pluoštais. Nustatyta, kad parametrinį stiprintuvą kaupinant keliais pluoštais stebimas naujų erdvinių komponentų atsiradimas, kuriuos sąlygoja parametrinė pakopinė difrakcija, o tai mažina bendrą sistemos energetinio keitimo efektyvumą.. Darbo metu pademonstruota galimybė mažinti parametrinės difrakcijos sąlygotus nuostolius parametriniame stiprintuve derinant kampus tarp kaupinimo pluoštų. Taip pat pristatomas alternatyvus būdas formuoti didelės energijos (kelių dešimčių milidžaulių) kelių optinių ciklų trukmės stabilios fazės impulsus 1,5 μm srityje. Būdas paremtas sąlyginai siauro spektro 1,5 μm srityje stiprinimu II tipo KTP kristale bei spektro plėtra inertinėse dujose po stiprinimo. 4 pakopų parametriniame stiprintuve pasiekta iki šiol didžiausia 12,5 mJ impulso energija 1,5 μm... [toliau žr. visą tekstą]

Disertacijos darbo tikslas – suformuoti ir parametriškai stiprinti kelių optinių ciklų trukmės impulsus infraraudonojoje srityje Šioje disertacijoje buvo tirtos dvi moduliuotosios fazės („čirpuotų“) impulsų parametrinio stiprinimo sistemos, stiprinančios ypač plataus spektro impulsus 800 nm bei 1,5 μm srityse. Pirmoji sistema skirta tirti galimybę didinti lazerinės spinduliuotės vidutinę galią keliais pluoštais kaupinamame parametriniame stiprintuve; antroji sistema skirta kelių optinių ciklų trukmės stabilios fazės impulsų formavimui 1,5 μm srityje. Disertacijoje aprašomas I tipo parametrinis stiprintuvas, kurio 2-oji pakopa buvo kaupinama dviem arba trimis nepriklausomų lazerinių šaltinių pluoštais. Nustatyta, kad parametrinį stiprintuvą kaupinant keliais pluoštais stebimas naujų erdvinių komponentų atsiradimas, kuriuos sąlygoja parametrinė pakopinė difrakcija, o tai mažina bendrą sistemos energetinio keitimo efektyvumą.. Darbo metu pademonstruota galimybė mažinti parametrinės difrakcijos sąlygotus nuostolius parametriniame stiprintuve derinant kampus tarp kaupinimo pluoštų. Taip pat pristatomas alternatyvus būdas formuoti didelės energijos (kelių dešimčių milidžaulių) kelių optinių ciklų trukmės stabilios fazės impulsus 1,5 μm srityje. Būdas paremtas sąlyginai siauro spektro 1,5 μm srityje stiprinimu II tipo KTP kristale bei spektro plėtra inertinėse dujose po stiprinimo. 4 pakopų parametriniame stiprintuve pasiekta iki šiol didžiausia 12,5 mJ impulso energija 1,5 μm... [toliau žr. visą tekstą] / Main objective of this thesis is to generate and amplify few cycle pulses in the infrared region. In this thesis, two approaches were introduced for few cycle pulse parametric amplification at 800 nm and 1.5 μm. First approach is dedicated for prospects for increasing average power of OPCPA via multi-beam pumping; the second approach is dedicated for generation of carrier-envelope-phase (CEP) stable high energy (up to tens of millijoules) few-cycle pulses at 1.5 μm. An experimental investigation of two or three beams-pumped OPCPA system based on type I BBO crystal is presented. The 2nd OPA stage was pumped by two or three pump beams derived from independent Nd:YAG laser amplifiers. The efficiency of interaction was shown to be comparable to that of single-beam pumped OPA and diminishes only slightly due to cascaded parametric diffraction of interacting waves. The effect was observed and its impact on efficiency of parametric amplification process was shown to decrease at larger intersecting angles of pump. In the prospect, the use of multiple lasers for OPA pumping has an appeal for increasing the repetition rate and consequently the average power of an ultrashort pulse laser system. Finally, the concept and realization of hybrid system based on type II KTP OPCPA and filamentation are described. A CEP-stable 1.5 μm OPCPA system with pulse energies up to 12.5 mJ after 4 OPA stages is demonstrated. Furthermore, self-compression of CEP-stable 2.2 mJ, 74.4 fs, 1.57 μm input... [to full text]

The thesis is devoted to magnetic metamaterials operating in the frequency range of 10 MHz 1 GHz. Mechanisms of tailoring the properties of metamaterials are developed and a number of linear and nonlinear applications is proposed.In Chapter 1, the introduction to the field of metamaterials is given and the main goal of the thesis is defined as the search for possible applications of low-frequency metamaterials. The main motivation is the potential of magnetic metamaterials in Magnetic Resonance Imaging (MRI).Chapter 2 briefly summarizes the near-field properties of magnetic metamaterials. Magnetic coupling between a pair of metamaterial elements is described and magnetoinductive (MI) waves propagating on the metamaterials arrays are introduced.In Chapter 3, the magnetic coupling between the elements is studied in more detail. Based on the analogy between MI waves and acoustic waves in solids, "diatomic" metamaterial arrays having two elements per unit cell are introduced. It is shown that by changing the resonant frequencies of the elements and the coupling between them it is possible to acquire additional freedom in tailoring the dispersion properties of MI waves compared to simple "monatomic" configurations.In Chapter 4, various linear applications of metamaterials are discussed. They are shift-dependent transmission, subwavelength imaging and focusing, and rotational resonance of MI waves. It is shown that the microscopic model based on taking the interaction between the elements into account allows for reliable explanation of the phenomena studied.In Chapter 5, a nonlinear application, parametric amplification of MI waves, is discussed. It is shown that parametric amplification can lead to the compensation of loss in metamaterials and to increase of the power extracted from an MRI detection system.Conclusions are drawn and possible directions for future work are determined in Chapter 6.

Interfaces play a crucial role in the exchange of energy and matter in various physical, chemical and biological systems. A particular interest has been to study interfaces between aqueous phases and various minerals because of their importance in understanding geochemical phenomena as well as for applications such as enhanced oil recovery. The nonlinear optical technique of vibrational sum-frequency generation (SFG) spectroscopy, introduced over 20 years ago, has become a powerful tool to investigate various surfaces, in particular, mineral-water interfaces. One of the challenges of the SFG spectroscopy of aqueous surfaces is the need to tune the central frequency of relatively narrowband IR lasers through the broad range of the OH-stretch frequencies of water molecules (3000 - 4000 cm-1). We have developed a novel ultrabroadband IR laser source that generates infrared pulses in the ~2800-6000 cm-1 range (lambda~3300-1800 nm) with bandwidths Delta(nu)&gt;1000 cm-1, and bandwidths &gt;2000 cm-1 in the near-IR range (lambda~1000-2000 nm). Pulse front tilt of signal pulse has been corrected allowing for compression of signal pulses down to 25 fsec. Such ultrabroadband IR pulses allow us to perform SFG spectroscopy of aqueous surfaces over the entire frequency range of water molecule spectrum (extending from ~2900 cm -1 to ~3800 cm -1) simultaneously, without tuning the laser ("in one shot"). We have used this novel ultrabroadband IR source to investigate the vibrational SFG spectra of silica/water interfaces. The high signal-to-noise ratio of our spectroscopic setup has allowed us to study low-intensity features that were not studied in detail, or recognized previously in the SFG-spectroscopy investigations, including: 1) non-hydrogen bonded OH vibrations at hydrophilic silica/water interfaces; 2) combination [stretch+bend] bands of water at the silica surface appearing at ~5000-5200 cm -1. 3) Overtones of water stretching modes at silica/water interfaces. The most important conclusions from these studies are outlined below. 1. Non-hydrogen bonded hydroxyls at silica/water interface. Typically SFG-studies of mineral/water interfaces (in particular, silica/water) have focused on the most pronounced features - peaks of H-bonded hydroxyls at ~3150 and ~3450 cm -1. We have been able to systematically observe and study a weaker peak at ~3670 - 3700 cm -1. This peak becomes more pronounced as the pH of aqueous phase decreases, as well as the ionic strength increases, indicating that the hydroxyls corresponding to this spectral feature are situated in a very close proximity to the surface. Isotopic dilution experiments indicate that the 3700 cm -1 feature is not due to asymmetric OH stretches as was suggested before. Based on our results, we suggest that this spectral feature corresponds to hydroxyls of water molecules at the silica surface that cannot hydrogen bond with silanol groups because of the lower density of silanols compared to H2O. We believe this to be the first surface-specific study of non-hydrogen bonded hydroxyls at silica, a surface widely accepted as hydrophilic. 2. SFG spectroscopy of [ν(OH)+δ(HOH)] combination bands of water at silica surface. We have extended SFG spectroscopy of the interfacial hydroxyls at mineral/water surfaces into the near-IR frequency range. The studies of overtones of interfacial OH(OD) groups will provide information on the anharmonicity of such species, and thus on the energy of dissociation. In addition, the positions of the overtone frequencies of the hydroxyls are more sensitive to interactions with the environment than the fundamental stretch frequencies. Our particular focus has been to study the stretch+bend combination band nu comb nu;(OH)+delta;(HOH) of liquid water which occurs in the near-IR spectral range at ~5000-5200 cm -1. It is typically much weaker in the FTIR absorption spectra than the fundamental transitions of the OH stretches or HOH bending, similar to overtones of these modes. We have performed, what we believe to be, the first surface-specific vibrational SFG spectroscopic measurements of combination bands of water molecules at silica surfaces. SFG spectroscopy of water combination band allows access to the water bending mode (delta~1600 cm -1), which still has not been observed in sum-frequency. / Chemistry

Um Amplificador Paramétrico Óptico (optical parametric amplifier - OPA) é uma fonte de luz coerente, de alta qualidade e sintonizável, baseada em processos ópticos não-lineares de segunda ordem. Alguns modelos possuem largura de banda estreita e um amplo intervalo de sintonia, podendo alcançar regiões que vão desde o ultravioleta até o infravermelho médio. A nossa motivação para construir este amplificador paramétrico óptico é sua utilização em experimentos de espectroscopia vibracional de superfícies através do processo óptico não-linear de segunda ordem, geração de soma de frequências (sum-frequency generation - SFG), que é uma técnica que exige fontes sintonizáveis no infravermelho médio e com altas intensidades de pico e largura de banda estreita. O objetivo desse trabalho foi projetar, montar e testar um amplificador paramétrico óptico capaz de produzir pulsos sintonizáveis de alta energia no infravermelho médio (&lambda; ~ 2,5 a 10 &mu;m) a partir de um laser de bombeio que fornece pulsos de 25 ps, com alta energia em &lambda; = 1064 nm. Para obter-se uma geração de infravermelho bastante eficiente, foi proposto um projeto inovador para amplificadores paramétricos de picossegundos, utilizando-se a geração de supercontínuo de luz branca como feixe sinal do estágio de amplificação paramétrica. O pulso de bombeio (&lambda; = 1064 nm) é dividido em duas partes: a primeira, de menor energia, é utilizada para gerar um pulso de alta largura espectral no infravermelho próximo (supercontínuo de luz branca de picossegundos). Uma fração espectral desse pulso é selecionada através de um monocromador e utilizada como semente do estágio de amplificação paramétrica. O cristal amplificador paramétrico (sulfeto de prata e gálio, AgGaS2) é então bombeado pelo restante do pulso de bombeio e simultaneamente amplifica a semente sintonizável no infravermelho próximo e gera um novo pulso de frequência complementar no infravermelho médio. Foram testados vários meios para geração de supercontínuo, mas os melhores resultados foram obtidos em uma cubeta de 10 cm de comprimento com uma mistura de água e água deuterada (3 % em volume de H2O em D2O) e em uma fibra fotônica não-linear com 2 m de comprimento. Usando o supercontínuo como feixe semente, observou-se amplificação paramétrica no caso do feixe gerado na fibra fotônica com um ganho de 260 vezes, mas não com o feixe gerado na mistura de água/água deuterada, presumivelmente pela maior instabilidade desse supercontínuo. / An Optical Parametric Amplifier (OPA) is a tunable light source of high quality, coherent radiation, based on second-order nonlinear optical processes. Some models have a narrow spectral bandwidth and a tuning range from the ultraviolet to the mid-infrared. The motivation for building this optical parametric amplifier is its use in vibrational spectroscopy of surfaces by a second-order nonlinear optical process, sum-frequency generation (SFG), which is a technique that requires tunable sources in the mid-infrared with narrow bandwidth and high peak intensities. The purpose of this work is to design, implement and test an OPA to generate tunable high energy pulses tuneable in the mid-infrared (&lambda; ~ 2.5 to 10 &mu;m) from a pumping laser that provides 25 ps pulses with high energy at &lambda; = 1064 nm. For an efficient mid-infrared generation, we propose an innovative design for picosecond parametric amplifiers, using the near infrared portion of a white-light supercontinuum pulse as the seed beam for the parametric amplifier. The pump pulse (&lambda; = 1064 nm) is divided into two parts: the first one, with lower energy, generates a high spectral width pulse in the near infrared (white-light supercontinuum picosecond pulse). A spectral fraction of this pulse is selected through a monochromator and is used as seed for the parametric amplification stage. The second part of the laser beam pumps the parametric amplifier crystal (silver gallium sulfide, AgGaS2) which simultaneously amplifies the tunable seed beam in the near infrared and generates a new pulse with complementary frequency in the mid-infrared. Several media were tested for supercontinuum generation, but the best results were obtained with a 10 cm long cuvette with a mixture of water and deuterated water (3 % volume of H2O in D2O) and with a 2 m long nonlinear photonic crystal fiber. Using the supercontinuum as a seed beam, we have obtained parametric amplification of the seed generated by the photonic fiber with a gain of 260 times, but not of the beam generated by the water mixture, presumably because of its significantly higher instability.