Stimuli sensitive polymers and hydrogels respond with large property changes to small physical and chemical stimuli (e.g. temperature, pH, ionic strength). The bulk behavior of these polymers is widely studied and they show an isotropic swelling. However, thin hydrogel layers of polymers on a substrate show a swelling behavior, which is constrained in some way. Therefore, size, confinement, patternability, response time and transition temperature of thin hydrogel layers are the most important parameters in technological applications and this study focuses on the investigation of these above-mentioned parameters. The aim of this study involves synthesis, characterization and application of thin photo-crosslinked hydrogel layers. Dimethylmaleimide (DMI) moiety was incorporated in the polymers chains and was used to introduce photo-crosslinking by [2+2] cyclodimerization reaction in the presence of UV irradiation. The following photo-crosslinkers based on DMI group were synthesized ? - Acrylate photo-crosslinker (DMIAm) - Acrylamide photo-crosslinker (DMIAAm) - Polyol photo-crosslinker (DMIPA, DMIPACl) The conventional free radical polymerization of above listed photo-crosslinker with its respective monomer resulted in formation of photo-crosslinkable polymers of (a) HEMA, (b) DMAAm, (c) NIPAAm/DMAAm, (d) NIPAAm/Cyclam. The properties of these polymers were investigated by NMR, UV-VIS spectroscopy, GPC and SPR. Thin hydrogel layers were prepared by spin coating on gold-coated LaSFN9 glass. The covalent attachment to the surface was achieved through an adhesion promoter. Swelling behavior of the thin polymer layers was thoroughly investigated by Surface Plasmon Resonance (SPR) Spectroscopy and Optical Waveguide Spectroscopy (OWS). SPR and OWS gave a wide range of information regarding the film thickness, swelling ratio, refractive index, and volume degree of swelling of the thin hydrogel layer. For hydrophilic photo-crosslinked hydrogel layers of HEMA and DMAAm, it was observed that the volume degree of swelling was independent of temperature changes but was dependent on the photo-crosslinker mol-% in the polymer. These surface attached thin hydrogel layer exhibited an anisotropic swelling. For NIPAAm photo-crosslinked hydrogel layers with DMAAm as a hydrophilic monomer, it was observed that both transition temperature (Tc) and volume degree of swelling increases with increase in the mol-% of DMAAm. To study the effect of film thickness on Tc and volume degree of swelling, hydrogels with wide range of film thickness were prepared and investigated by SPR. These results provided vital information on the swelling behavior of surface attached hydrogel layer and showed the versatility of SPR instrument for studying thin hydrogel layers. Later part of project involved synthesis of multilayer hydrogel assembly involving a thermoresponsive polymer and a hydrophilic polymer. The combination of two layers with photo-crosslinkable DMAAm polymer as base layer and photo-crosslinkable NIPAAm polymer as top layer formulate a multilayer assembly where, the base layer only swells in response to temperature and the top layer shows temperature dependent swelling. Photo-crosslinked hydrogel layers of NIPAAm, DMAAm and HEMA shows a high-resolution patterns when irradiated by UV light through a chromium mask. At last this study focused on an important application of these hydrogel layers for cell attachment processes. Cell growth, proliferation and spreading shows a biocompatible nature of these hydrogel surfaces. Such thermoresponsive photo-crosslinkable multilayer structure forms bases for future projects involving their use in actuator material and cell-attachment processes.

Du fait de sa complexité, le fonctionnement du cerveau est exploré par des méthodes très diverses, telles que la neurophysiologie et les neurosciences cognitives, et à des échelles variées, allant de l'observation de l'organe dans son ensemble jusqu'aux molécules impliquées dans les processus biologiques. Ici, nous proposons une étude à l'échelle cellulaire qui s'intéresse à deux briques élémentaires du cerveau : les neurones et les cellules gliales. L'approche choisie est la biophysique, de part les outils utilisés et les questions abordées sous l'angle de la physique. L'originalité de ce travail est d'utiliser des cellules primaires du cerveau dans un souci de proximité avec l'in vivo, au sein de systèmes in vitro dont la structure chimique et physique est contrôlé à l'échelle micrométrique. Utilisant les outils de la microélectronique pour un contrôle robuste des paramètres physico-chimiques de l'environnement cellulaire, ce travail s'intéresse à deux aspects de la biologie du cerveau : la polarisation neuronale, et la sensibilité des cellules gliales aux propriétés mécaniques de leur environnement. A noter que ces deux questions sont étroitement imbriquées lors de la réparation d'une lésion. La première est cruciale pour la directionalité de la transmission de signaux électriques et chimiques et se traduit par une rupture de symétrie dans la morphologie du neurone. La seconde intervient dans les mécanismes de recolonisation des lésions, dont les propriétés mécaniques sont altérées., Les études quantitatives menées au cours de cette thèse portent essentiellement sur la phénoménologie de la croissance de ces deux types de cellules et leur réponse à des contraintes géométriques ou mécaniques. L'objectif in fine est d'élucider quelques mécanismes moléculaires associés aux modifications de la structure cellulaire et donc du cytosquelette. Un des résultats significatifs de ce travail est le contrôle de la polarisation neuronale par le simple contrôle de la morphologie cellulaire. Ce résultat ouvre la possibilité de développer des architectures neuronales contrôlées in vitro à l'échelle de la cellule individuelle. / The complex structure of the brain is explored by various methods, such as neurophysiology and cognitive neuroscience. This exploration occurs at different scales, from the observation of this organ as a whole entity to molecules involved in biological processes. Here, we propose a study at the cellular scale that focuses on two building elements of brain: neurons and glial cells. Our approach reachs biophysics field for two main reasons: tools that are used and the physical approach to the issues. The originality of our work is to keep close to the in vivo by using primary brain cells in in vitro systems, where chemical and physical environments are controled at micrometric scale. Microelectronic tools are employed to provide a reliable control of the physical and chemical cellular environment. This work focuses on two aspects of brain cell biology: neuronal polarization and glial cell sensitivity to mechanical properties of their environment. As an example, these two issues are involved in injured brains. The first is crucial for the directionality of the transmission of electrical and chemical signals and is associated to a break of symmetry in neuron morphology. The second occurs in recolonization mechanisms of lesions, whose mechanical properties are impaired. During this thesis, quantitative studies are performed on these two cell types, focusing on their growth and their response to geometrical and mechanical constraints. The final aim is to elucidate some molecular mechanisms underlying changes of the cellular structure, and therefore of the cytoskeleton. A significant outcome of this work is the control of the neuronal polarization by a simple control of cell morphology. This result opens the possibility to develop controlled neural architectures in vitro with a single cell precision.

Nous avons étudié l'influence de la fabrication de guides d'ondes optiques par échange protonique doux(SPE) sur les cristaux de niobate de lithium (LN) polarisé périodiquement et nous avons montré que,dans certains cas, ce processus conduit à la création de nanodomaines en surface. Ces nanodomaines enforme d'aiguille peuvent être responsables de la réduction de l'efficacité de conversion non linéaireobservée dans les guides qui sont affectés. Nous avons également étudié l'influence de différents typesd'échange protonique sur la formation, par application d'un champ électrique, de domaines dans le LNcongruent. Cette étude montre que le seuil de nucléation peut être fortement réduit par la présence duguide d'onde et que l'apparition et le développement des domaines en forme de traits est fortementmodifiée. Elle montre également que la fusion des nanodomaines existants au voisinage des parois dedomaine aboutit à la formation de parois élargies et de domaines en forme de dendrites. En irradiantavec un faisceau d'électrons la surface Z- d'un échantillon de LN préalablement soumis à un échangeprotonique doux et recouvert d'une couche de résine électronique, nous avons réussi à former desdomaines avec des formes arbitraires. Par cette technique, nous avons fabriqué des domainespériodiques d'excellente qualité dans des cristaux présentant des guides canaux SPE. Des expériences degénération de deuxième harmonique dans ces guides nous ont permis d'obtenir des efficacités deconversion de 48%/W.cm2 ce qui est conforme aux prédictions ainsi que la forme des spectres d'accordde phase que nous avons observés. Ceci démontre tout l'intérêt de ce processus / The investigation of influence of the soft proton exchange (SPE) optical waveguide (WG) creation onperiodically poled lithium niobate (PPLN) has been done. It has been shown that the WG fabricationprocess can induce the formation of needle like nanodomains, which can be responsible for thedegradation of the nonlinear response of the WG created in PPLN crystals. The domain structure (DS)evolution has been studied in congruent lithium niobate (LN) crystals with surface layers modified bythree different proton exchange techniques. The significant decrease of the nucleation threshold fieldand qualitative change of domain rays nucleation and growth have been revealed. The formation of abroad domain boundary and dendrite domain structure as a result of nanodomains merging in front ofthe moving rays has been demonstrated. The formation of DS in LN with SPE by irradiation of coveredby electron resist polar surface of LN has been investigated. Formation of domains with arbitrary shapesas a result of discrete switching has been revealed. Finally, it has been demonstrated that electron beamirradiation of lithium niobate crystals with surface resist layer can produce high quality periodical domainpatterns after channel waveguide fabrication. Nonlinear characterizations show that the conversionefficiencies and the phase matching spectra conform to theoretical predictions, indicating that thiscombination presents a great interest for device fabrication. Second harmonic generation withnormalized nonlinear conversion efficiency up to 48%/(W cm2) has been achieved in such waveguides

Stimuli sensitive polymers and hydrogels respond with large property changes to small physical and chemical stimuli (e.g. temperature, pH, ionic strength). The bulk behavior of these polymers is widely studied and they show an isotropic swelling. However, thin hydrogel layers of polymers on a substrate show a swelling behavior, which is constrained in some way. Therefore, size, confinement, patternability, response time and transition temperature of thin hydrogel layers are the most important parameters in technological applications and this study focuses on the investigation of these above-mentioned parameters. The aim of this study involves synthesis, characterization and application of thin photo-crosslinked hydrogel layers. Dimethylmaleimide (DMI) moiety was incorporated in the polymers chains and was used to introduce photo-crosslinking by [2+2] cyclodimerization reaction in the presence of UV irradiation. The following photo-crosslinkers based on DMI group were synthesized ? - Acrylate photo-crosslinker (DMIAm) - Acrylamide photo-crosslinker (DMIAAm) - Polyol photo-crosslinker (DMIPA, DMIPACl) The conventional free radical polymerization of above listed photo-crosslinker with its respective monomer resulted in formation of photo-crosslinkable polymers of (a) HEMA, (b) DMAAm, (c) NIPAAm/DMAAm, (d) NIPAAm/Cyclam. The properties of these polymers were investigated by NMR, UV-VIS spectroscopy, GPC and SPR. Thin hydrogel layers were prepared by spin coating on gold-coated LaSFN9 glass. The covalent attachment to the surface was achieved through an adhesion promoter. Swelling behavior of the thin polymer layers was thoroughly investigated by Surface Plasmon Resonance (SPR) Spectroscopy and Optical Waveguide Spectroscopy (OWS). SPR and OWS gave a wide range of information regarding the film thickness, swelling ratio, refractive index, and volume degree of swelling of the thin hydrogel layer. For hydrophilic photo-crosslinked hydrogel layers of HEMA and DMAAm, it was observed that the volume degree of swelling was independent of temperature changes but was dependent on the photo-crosslinker mol-% in the polymer. These surface attached thin hydrogel layer exhibited an anisotropic swelling. For NIPAAm photo-crosslinked hydrogel layers with DMAAm as a hydrophilic monomer, it was observed that both transition temperature (Tc) and volume degree of swelling increases with increase in the mol-% of DMAAm. To study the effect of film thickness on Tc and volume degree of swelling, hydrogels with wide range of film thickness were prepared and investigated by SPR. These results provided vital information on the swelling behavior of surface attached hydrogel layer and showed the versatility of SPR instrument for studying thin hydrogel layers. Later part of project involved synthesis of multilayer hydrogel assembly involving a thermoresponsive polymer and a hydrophilic polymer. The combination of two layers with photo-crosslinkable DMAAm polymer as base layer and photo-crosslinkable NIPAAm polymer as top layer formulate a multilayer assembly where, the base layer only swells in response to temperature and the top layer shows temperature dependent swelling. Photo-crosslinked hydrogel layers of NIPAAm, DMAAm and HEMA shows a high-resolution patterns when irradiated by UV light through a chromium mask. At last this study focused on an important application of these hydrogel layers for cell attachment processes. Cell growth, proliferation and spreading shows a biocompatible nature of these hydrogel surfaces. Such thermoresponsive photo-crosslinkable multilayer structure forms bases for future projects involving their use in actuator material and cell-attachment processes.