In a world where money often is the main controlling factor, everything that can be tends to be more and more optimized. Regarding electrical machines, developers have always had the goal to make them better. The latest trend is to make machines as efficient as possible, which calls for accurate simulation models where different designs can be tested and evaluated. The finite element method is probably the most popular approach since it makes it possible to, in an easy and accurate way, get numerical solutions to a variety of physics problems with complex geometries and non-linear materials. This licentiate thesis includes two different projects in which finite element methods have had a central roll. In the first project, the goal was to develop a simulation model to be able to predict demagnetization of permanent magnets. It is of great importance to be able to predict if a permanent magnet will be demagnetized or not in a certain situation. In the worst case, the permanent magnets will be completely destroyed and the machine will be completely useless. However, it is more probable that the permanent magnets will not be completely destroyed and that the machine still will be functional but not as good as before. In a time where money is more important than ever, the utilization has to be as high as possible. In this study the demagnetization risk for different rotor geometries in a 12 kW direct driven permanent magnet synchronous generator was studied with a proprietary finite element method simulation model. The demagnetization study of the different rotor geometries and magnet grades showed that here is no risk for the permanent magnets in the rotor as it is designed today to be demagnetized. The project also included experimental verification of the simulation model. The simulation model was compared with experiments and the results showed good agreement. The second project treated the redesign of the rotor in the generator previously mentioned. The goal was to redesign the surface mounted NdFeB rotor to use a field concentrating design with ferrite permanent magnets instead. The motivation was that the price on NdFeB magnets has fluctuated a lot the last few years as well as to see if it was physically possible to fit a ferrite rotor in the same space as the NdFeB rotor. A new rotor design with ferrite permanent magnets was presented together with an electromagnetic and a mechanical design.

Thermal modelling is of great importance in all electric machines but especially in permanent magnet synchronous machines (PMSMs). The thermally fragile permanent magnets (PMs) can more easily be demagnetized at high temperatures. When high speed machines are considered, heat extraction surfaces are small due to the higher energy density. This thesis focuses on the thermal modelling of a high speed slotless PMSM using analytical techniques. From literature it is clear that analytical distributed models have not reached its full potential in thermal modelling of electric machines. Thermal experiments on high speed electric machine, including rotor PM temperature measurements are not commonly found in literature. The thermal behaviour of each component of the machine is influenced by the overall temperature distribution. The widely used lumped parameter (LP) cylindrical component model derived by Mellor et al. is used to derive a LP model of the entire machine. A two dimensional (2-D) analytical distributed model is derived for the rotor PM using the separation of variables method. Three of the boundaries are assumed to be of the convection type and the fourth of constant heat flow type. Different convection coefficients are assumed to exist in the radial and axial directions. The distributed model is verified using COMSOL R and good correlation is shown. The distributed model is used to determine the temperature distribution in the PM and the convection heat flow in the axial direction. Loss calculation is an integral part of thermal modelling. Temperature changes in an electric machine is due to the interaction between the heat generation (losses) and heat removal. The losses found in a high speed slotless PMSM are investigated. A 2-D analytical magnetic model is used to determine the stator lamination loss as well as the stator winding eddy current loss. A simple LP model is derived for the rotor eddy current loss. Due to the relatively large resistivity of the shielding cylinder and PM material, the rotor eddy current loss is a significant part of the total machine loss. The tangential current width is determined empirically in this thesis but a 3-D distributed model which includes end space effects and skin depth could also be used. A large part of thermal modelling is empirically based. The convection and interface resistances are determined through a set of experiments in this thesis. The measured and calculated convection coefficients correlated well for both forced and natural convection cooling. A large temperature increase found during the no-load test can be attributed to large bearing loss, possibly due to axial loading. The LP model is modified to include the phenomena found during the experiments. The thermal model is used to predict the temperatures of a high speed PMSM at rated load and speed. Although the PM is not heated above the Curie temperature, demagnetization is still possible. According to the model, the machine will not be able to operate at full load and speed for extensive periods due to mechanical stress limits being exceeded. The temperature distribution of the PM could not be verified since the temperatures in the air gap and end space could not be measured. It is expected that axial heat flow will be larger than what is currently predicted by the distributed model. A sensitivity analysis was used to investigate the influence of the thermal resistances and losses on the machine temperatures. Methods for reducing the rotor eddy current loss and interface resistances are also discussed. The first contribution of this thesis is the 2-D analytical distributed model for the PM of a high speed PMSM. Hot spots and 2-D heat flow can be analysed using this model. Combining the LP and 2-D analytical distributed models is another contribution. This combines the simplicity and fast solution times of the LP model with the 2-D thermal distribution of the analytical distributed model. The systematic experimental investigation of the thermal behaviour of a high speed PMSM is a further contribution. / Thesis (Ph.D. (Electrical Engineering))--North-West University, Potchefstroom Campus, 2011.

Thermal modelling is of great importance in all electric machines but especially in permanent magnet synchronous machines (PMSMs). The thermally fragile permanent magnets (PMs) can more easily be demagnetized at high temperatures. When high speed machines are considered, heat extraction surfaces are small due to the higher energy density. This thesis focuses on the thermal modelling of a high speed slotless PMSM using analytical techniques. From literature it is clear that analytical distributed models have not reached its full potential in thermal modelling of electric machines. Thermal experiments on high speed electric machine, including rotor PM temperature measurements are not commonly found in literature. The thermal behaviour of each component of the machine is influenced by the overall temperature distribution. The widely used lumped parameter (LP) cylindrical component model derived by Mellor et al. is used to derive a LP model of the entire machine. A two dimensional (2-D) analytical distributed model is derived for the rotor PM using the separation of variables method. Three of the boundaries are assumed to be of the convection type and the fourth of constant heat flow type. Different convection coefficients are assumed to exist in the radial and axial directions. The distributed model is verified using COMSOL R and good correlation is shown. The distributed model is used to determine the temperature distribution in the PM and the convection heat flow in the axial direction. Loss calculation is an integral part of thermal modelling. Temperature changes in an electric machine is due to the interaction between the heat generation (losses) and heat removal. The losses found in a high speed slotless PMSM are investigated. A 2-D analytical magnetic model is used to determine the stator lamination loss as well as the stator winding eddy current loss. A simple LP model is derived for the rotor eddy current loss. Due to the relatively large resistivity of the shielding cylinder and PM material, the rotor eddy current loss is a significant part of the total machine loss. The tangential current width is determined empirically in this thesis but a 3-D distributed model which includes end space effects and skin depth could also be used. A large part of thermal modelling is empirically based. The convection and interface resistances are determined through a set of experiments in this thesis. The measured and calculated convection coefficients correlated well for both forced and natural convection cooling. A large temperature increase found during the no-load test can be attributed to large bearing loss, possibly due to axial loading. The LP model is modified to include the phenomena found during the experiments. The thermal model is used to predict the temperatures of a high speed PMSM at rated load and speed. Although the PM is not heated above the Curie temperature, demagnetization is still possible. According to the model, the machine will not be able to operate at full load and speed for extensive periods due to mechanical stress limits being exceeded. The temperature distribution of the PM could not be verified since the temperatures in the air gap and end space could not be measured. It is expected that axial heat flow will be larger than what is currently predicted by the distributed model. A sensitivity analysis was used to investigate the influence of the thermal resistances and losses on the machine temperatures. Methods for reducing the rotor eddy current loss and interface resistances are also discussed. The first contribution of this thesis is the 2-D analytical distributed model for the PM of a high speed PMSM. Hot spots and 2-D heat flow can be analysed using this model. Combining the LP and 2-D analytical distributed models is another contribution. This combines the simplicity and fast solution times of the LP model with the 2-D thermal distribution of the analytical distributed model. The systematic experimental investigation of the thermal behaviour of a high speed PMSM is a further contribution. / Thesis (Ph.D. (Electrical Engineering))--North-West University, Potchefstroom Campus, 2011.

Many high performance drive applications require wide Constant Power Speed Range (CPSR) for efficient use of energy. The examples of such applications are the starter alternator system of automobiles proposed for the 42V PowerNet, traction in the hybrid/electric vehicle, wind power generator etc. The Permanent Magnet (PM) machine is the natural choice of such niche applications because of their higher efficiency and compact size. However, the Surface Permanent Magnet (SPM) machine with sine distributed winding and radially-laminated Interior Permanent Magnet (IPM) machine with conventional structure has very limited or zero flux-weakening capability. The flux-weakening capability of the SPM machine can be improved by using concentrated, fractional-slot stator but here well-known advantages of the sine distributed winding are needed to be compromised. In the IPM machine, fluxweakening was improved using axial lamination and more than two magnet layers per pole. However, the construction of such IPM machine is complicated and expensive. This thesis presents design and analysis of a new type of the Interior Permanent Magnet (IPM) machine that have a very wide Constant Power Speed Range (CPSR) without compromising simplicity of construction and advantages of the distribution winding. In the new IPM machine, the magnet poles were segmented in the radially direction and the iron bridges between magnet segments provide for additional paths of flux-canalization to give the rotor an inherent capability of fluxweakening. Consequently, a very wide constant power speed range can be achieved in such machines. The proposed IPM machine of this work was referred as the Segmented IPM machine. The thesis focuses on the optimization of the Segmented IPM machine in a 42V environment of the automobile. First, for the conceptual evaluation a 4 pole, 550W Segmented Magnet IPM machine was optimized using finite element analysis. The parameters were calculated for prediction of the steady-state and transient performances. The torque- and power-speed capability were estimated using time-step, circuit-coupled finite element analysis. The cogging torque and variation of iron loss with frequency were also investigated during the design process. A prototype machine was constructed on the basis of the optimized design. The steady-state and transient performances of the prototype machine were measured and compared with the predicted results for experimental verification. The measured performance analysis was found to match very well with the predicted results. The measured torque- and power-speed capability of the Segmented IPM machine was also compared to those of a conventional, non-segmented IPM machine of similar rating and size. The thesis also presents the optimized design of a 6kW, 12 pole Segmented Magnet IPM machine for application in the Integrated Starter Alternator (ISA) of the electric/hybrid vehicle. It can be concluded from the predicted steady-state analysis of the 6 kW, 12 pole Segmented Magnet IPM machine that it should be able to satisfy most of the required criteria of an ISA with appropriate design optimization.

Thesis (M.Eng.)--Memorial University of Newfoundland, 1999. / Bibliography: leaves 97-101.

Thesis (Ph. D.)--Florida State University, 2006. / Advisor: David A. Cartes, Florida State University, College of Engineering, Dept. of Mechanical Engineering. Title and description from dissertation home page (viewed Sept. 18, 2006). Document formatted into pages; contains xii, 133 pages. Includes bibliographical references.

No description available.

Thesis (MEng)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Please refer to full text for abstract.

Wind power generation has gained a large share in the renewable energy market over the past few years. This study investigates the impact of large scale penetration of permanent magnet synchronous generator (PMSG) based wind turbines on power quality of the grid. PMSGs are attractive due to the absence of a gearbox in the drive-train, which results in lower maintenance costs and higher reliability. Moreover, the advancements in power electronics have facilitated PMSGs to generate optimal power at varying wind speed conditions. This is achieved through the use of maximum power point tracking algorithms. The drawbacks of PMSG-based wind energy systems are that they inject harmonics into the network and cause flicker as well as other power quality issues. Despite these disadvantages, the grid code requires that PMSGs stay connected to the grid even under grid disturbances. This is because the reactive power control capability of PMSG-based wind energy systems can actually assist with voltage support. It will be shown in this study that disconnecting large scale PMSGs based wind turbines during grid disturbances has a detrimental effect on transient stability of the grid. This study will show that PMSG-based wind energy systems improve transient stability and assist in voltage support through reactive power control. Moreover, the impacts of large scale PMSG based wind turbines on power quality of the grid can be reduced by various means, which are also addressed in the study.

No description available.