Over the last decade, impressive development in lead halide perovskites (LHPs) have made them leading candidate materials for photovoltaics (PVs), X-ray scintillators, and light-emitting diodes (LEDs). The success of LHPs NCs in lighting and display applications is mainly originated from their high photoluminescence quantum yield (PLQY), narrow emission, sizable bandgap, and cost-effective fabrication. Consequently, a comprehensive understanding of the design principles of LHP NCs will fuel further innovations in their optoelectronic applications. This dissertation centers on the synthesis and self-assembly of LHP NCs. At first, we investigate the capability of colloidal synthetic routine to engineer the shape, size, and dimensionality of the resulting LHPs NCs (chapter 2), including 0D nanospheres, 2D nanoplates, and 3D nanocubes. Starting from the LHPs NCs, nanoplates (chapter 3), nanowires (chapter 4), and superstructures (chapter 5) are successfully achieved via various self-assembly strategies. In chapter 3, we present a liquid-air interfaces-assisted self-assembly technique to obtain micro-scale CsPbBr3 nanoplates from as-synthesized nanoscale NCs. The AC-HRTEM offered an atomic-level observation during the structural evolution and revealed an oriented attachment-mediated assembly mechanism. The assembled CsPbBr3 nanoplates exhibited ultrahigh stability under X-ray energy dispersive spectroscopy (EDS) mapping conditions (300-kV electron beam), and the first atomic-resolution EDS elemental mapping data of LHP NCs were acquired. In chapter 4, we demonstrate an efficient green-chemistry approach for the self-assembly of CsPbBr3 NCs into 1D nanowires and nanobelts via the light induction. As an elegant and promising green-chemistry approach, light-induced self-assembly represents a rational method for designing perovskites. In chapter 5, we will explore the self-assembly of CsPbBr3 NCs into superstructures to overcome the ‘green gap’ to achieve a pure green emission with high PLQY for realizing next-generation vivid displays. In summary, we systematically investigated the mechanisms of LHP NC self-assembly, the kinetics of their morphological evolution and phase transitions, and driving forces that govern the self-assembly process. The assembled LHP NCs manifest desirable properties (e.g., superfluorescence, improved photoluminescence lifetime, enhanced stability against moisture, light, electron-beam irradiation, and thermal-degradation) that translate into dramatic improvements in device performance.

The application and efficiency of optoelectronic devices depends on the ability to control the absorption and emission processes of photons in semiconductors. This thesis looks at three different applications of spectral management across a broad range of optoelectronic devices: photovoltaics (PVs), luminescent solar concentrators (LSCs) and light-emitting diodes (LEDs). Multiple excitation generation (MEG) – a process in which multiple charge-carrier pairs are generated from a single optical excitation - is a promising way to improve the photocurrent in photovoltaic devices and offers the potential to break the Shockley-Queisser limit. Here we present solar cells fabricated from PbSe nanorods which show external quantum efficiencies exceeding 100 %. This demonstrates the potential for substantial improvements in PV device performance due to MEG. Through spatial and spectral concentration, LSCs have the potential to reduce the cost of photovoltaic energy production and are attractive prospects for photobioreactors and building-integrated applications. Here we introduce versatile star-shaped donor-acceptor molecules based on a central BODIPY acceptor with oligofluorene donor side units. We perform comprehensive device measurements and Monte Carlo ray tracing simulations of LSCs. We find that the measured structures permit waveguide propagation lengths on a par with state-of-the-art nanocrystalline emitters, while proposed hypothetical structures can be seen as viable candidates for photobioreactor and energy production roles and should be synthesized. The efficiency of nanocrystal-based LEDs is inherently limited by the types of crystals used. Cesium lead halide perovskite nanocrystals exhibit photoluminescence quantum efficiencies approaching 100%. However, due to the large surface areas and anion mobility halogen exchange between perovskite nanocrystals of different compositions occurs rapidly, limiting applications. Here, we report significantly reduced halide exchange between chloride and iodide CsPbX3 (X= Cl, I) perovskite nanocrystals. We investigate perovskite-based multi-crystal component samples and their resulting optical and electrical interactions in bulk heterojunction LEDs. Efficient photon reabsorption from CsPbCl3 to CsPbI3 nanocrystals was found to improve LED device performance.

Halide perovskite semiconductor nanocrystals have been studied a lot recently because they allow a precise control over the entire visible emission spectrum and as a result, the possibility of a variety of light-emitting applications. In this study, cesium lead bromide CsPbBr3 and cesium lead iodide CsPbI3 nanoplatelets of 3, 4 and 5 monolayers (ML) have been synthesized. The absorbance and emission of each solutions and monolayer are measured and analyzed in terms of the change in excitonic nature. The results show that the exciton peak decreases with the number of monolayers with a stronger excitonic behavior in the Bromide system in comparison to the Iodine perovskite with nearly no excitonic feature for the 5 ML system. An analysis of the apparent Stokes-shift show that it increases with the number of monolayer for CsPbBr3 in comparison with the Iodide system where it decreases. The vibrational properties were quantified with Raman spectroscopy and showed that a second signifying peak of the perovskite vibration change upon quantum confinement.

Nanočástice perovskitů halogenidů kovů vykazují unikátní vlastnosti, především výjimečně vysoké hodnoty kvantových výtěžků fluorescence, které předurčují tyto materiály pro aplikace v optoelektronických a fotonických zařízeních. Tato práce popisuje přípravu nanočástic perovskitů halogenidů kovů pomocí stabilizačních činidel inspirovaných přírodou. Stabilizační činidla zde slouží nejen ke stabilizaci, ale i k modifikaci povrchu nanočástic za účelem zvýšení funkčnosti výsledných nanostruktur. Úvod práce popisuje optimalizaci přípravy nanočástic precipitační technikou za použití stabilizačních činidel; jako stabilizační činidlo byl zvolen adamantan-1-amin spolu s hexanovou kyselinou. Bylo prokázáno, že klíčový vliv na optické vlastnosti výsledných koloidních roztoků má volba rozpouštědel a teploty při precipitaci. Mimo jiné byl zkoumán vliv koncentrace prekurzorů na výslednou morfologii a optické vlastnosti nanočástic a jejich koloidních roztoků. V neposlední řadě byly nanočástice stabilizovány adamantan-1-aminem spolu s různými karboxylovými kyselinami a byly studovány optické vlastnosti a koloidní stabilita výsledných koloidních roztoků. V dalším kroku byly nanočástice perovskitů stabilizovány pomocí proetogenních aminokyselin L-lysinu and L-argininu. Takto stabilizované nanočástice vykazovaly úzká emisní spektra ve viditelné oblasti a kvantové výtěžky fluorescence dosahující hodnot téměř 100 %. Stabilizace nanočástic prostřednictvím postranních skupin aminokyselin byla prokázána navázáním chránící terc-butoxykarbonylové skupiny na -amino skupinu. Nanočástice stabilizované modifikovaným lysinem v průběhu jejich přípravy vykazovaly závislost optických vlastností na přítomnosti vody. Předpokládá se, že molekuly vody jsou schopné kontrolovat růst krystalové mřížky po navázání na prekurzory perovskitů a ovlivňovat tak výslednou velikost nanočástic, což vede k projevení kvantových jevů. Spojení nanočástic perovskitů s peptidy představuje nový typ materiálů kombinujících výjimečné optické vlastnosti se samoorganizačními a senzorickými vlastnostmi. Tento koncept byl představen přípravou nanočástic perovskitů stabilizovaných cyklo(RGDFK) pentapeptidem. Vzhledem k citlivosti peptidů na jejich byly nanočástice stabilizovány peptidovými nukleovými kyselinami, robustními analogy nukleových kyselin. Ke stabilizaci nanočástic byl připraven monomer a trimer peptidové nukleové kyseliny obsahující thymin jako dusíkatou bázi. Thymin byl na povrchu nanočástic dostupný k interakci s adeninem přes vodíkové můstky umožňující přenos náboje. Kombinace peptidových nukleových kyselin a perovskitů s unikátními optickými vlastnostmi otevírá aplikační možnosti zejména v oblasti optických senzorů.

Featuring size-tunable electrical and optical properties, semiconductor nanocrystals (NCs) attract intensive interest in developing promising functional materials for optoelectronic appli-cations. The surface ligands not only play an important role in the synthesis and colloidal sta-bility of NCs, but also significantly affect their photophysical and electrochemical properties. In this dissertation, I am dealing with the surface ligand engineering of NCs (including both perovskite and metal chalcogenide families) for optical and photocatalytic applications. Polymer ligands are regarded to enable better colloidal stability, durability and processability of fluorescent NCs, which is especially important for perovskite NCs. However, the current wide-used polymer ligands fail to provide sufficient surface passivation for the NCs, which is unfavorable for their luminescence. To address this issue, a dual-ligand system based on par-tially hydrolyzed poly(methyl methacrylate) (h-PMMA) and highly branched polyethyl-enimine (PEI) was designed to stabilize perovskite NCs. The hydrophobic polymer of h-PMMA imparts excellent film-forming properties and durability to the resulting NC-polymer composite. The PEI forms an amino-rich, strongly binding ligand layer on the surface of the NCs being responsible for the significant improvement of the photoluminescence quantum yield and the stability of the resulting material. These superior properties allowed us to fabri-cate a proof-of-concept thin film organic light-emitting diode (OLED) with h-PMMA/PEI-stabilized perovskite NCs. A further insight into the roles of double polymer ligands (h-PMMA and PEI) during the mechanosynthesis of perovskites nanoparticles (NPs) was pro-vided. The h-PMMA can form micelles in the grinding solvent of dichloromethane to act as size-regulating templates for the growth of NPs. The PEI with large amounts of amino groups induced enrichment of PbBr2 in the reaction mixture, which in turn caused the formation of heterostructured CsPbBr3-CsPb2Br5-mPbBr2 and CsPbBr3-Cs4PbBr6-nCsBr NPs. Not only polymer, but also inorganic ligands can be extremely attractive for capping of NCs. In the frame of this thesis, a two-step surface modification strategy was developed to control-lably destabilize the colloidal NCs, which in turn facilitated their 3D assembly into aerogels. Specifically, the long-chain oleic acid ligands were exchanged to the ultra-short-chain inorganic (NH4)2S ligands. These new ligands were further protonated by changing the dispersing solvent, which caused desired colloidal destabilization. The as-prepared CdSe NC aerogels with highly porous and self-supporting structure were found to be attractive for solid-state photocatalysis in a gas phase. Indeed, the (NH4)2S ligand is favourable for the adsorption and activation of substrate molecules (i.e., H2O and CO2) on the large open surface of NC gel, thereby promoting the progress of CO2 photoreduction. As a result, the photocatalytic activity for CO2 reduction of CdSe NC aerogels created in this work is 12-fold higher than that of the pristine non-assembled NC-precipitates.:Abstract 1 Contents 3 Abbreviations 6 List of Figures and Tables 8 1. Colloidal Semiconductor Nanocrystals and their Ligand Shell 13 1.1. Colloidal Semiconductor Nanocrystals 14 1.1.1. Inorganic Core of NCs 15 1.1.1.1. Metal Chalcogenide NCs 16 1.1.1.2. Metal Pnictide NCs 16 1.1.1.3. Halide Perovskites NCs 17 1.1.2. The Surface Ligands for NCs 18 1.1.2.1. The Classification of Surface Ligands based on Head-Groups 18 1.1.2.2. The Classification of Surface Ligands based on Tail-Groups 19 1.2. The Role of Ligands 20 1.2.1. The Role of Ligands in the Synthesis of NCs 20 1.2.2. The Role of Ligand in Colloidal NCs Dispersion and Stability 22 1.2.3. The Role of Ligand in the Light-Matter Interactions as Applied to NCs 24 1.3. The Surface Ligand Engineering of NCs 26 1.3.1. Introducing Ligands during the Synthesis 26 1.3.2. Introducing the Ligands during Post-Synthesis Process 27 1.4. Challenges to be Addressed in this Dissertation 29 2. Polymer Ligands Enhance the Stability and Fluorescence of Perovskite for Optical Application 31 2.1. Background and Motivation 32 2.2. Results and Discussion 34 2.2.1. Spectral Characterization 34 2.2.2. Morphological Characterization 40 2.2.3. Surface Composition 41 2.2.4. Processability, Stability and Durability 43 2.2.5. Green-LED 46 2.3. Conclusions 48 3. Polymer Ligands Assist Mechanosynthesis of Perovskite Nanoparticles 49 3.1. Background and Motivation 50 3.2. Results and Discussion 50 3.2.1 Morphology and Composition 51 3.2.2 Formation and Phase Conversion of the Nanoparticles 53 3.2.3. Spectral Characterization 58 3.3. Conclusions 60 4. Ligand Protonation Promote 3D Assembly of CdSe Nanocrystals for CO2 Photoreduction 62 4.1. Background and Motivation 63 4.2. Results and Discussion 64 4.2.1. The Gelation Method 64 4.2.2. Surface Composition of the NC Aerogels 67 4.2.3. Performance of CdSe-S Aerogels in Photoreduction of CO2 68 4.2.4. Photocatalytic Mechanism of the CdSe-S/Ni Aerogel 70 4.3. Conclusion 73 5. Conclusions and Perspectives 75 Appendix. Experimental Section 78 A.1. Reagents 78 A.2. NCs synthesis 78 A.2.1 Mechanosynthesis of Polymer-Coordinated Perovskite NCs 78 A.2.2 Oil Phase Synthesis of Colloidal CdSe NCs 79 A.2.3 Ligand Protonation-Promoted Assembly of CdSe-S NCs into Gel 79 A.3. Optical and Photocatalytic Applications of NCs 80 A.3.1 Optical Applications of Polymer-Stabilized Perovskite NCs 80 A.3.2 Photocatalytic Applications of CdSe-S Aerogels 80 A.4. Characterization Methods 81 A.4.1 Morphology Characterization 81 A.4.2.Element Characterization 81 A.4.3 Diffraction Characterization 82 A.4.4 Spectroscopy Characterization 82 A.4.5 Gas adsorption Measurement 82 A.4.6 Electrochemical Measurements 83 A.4.7 Other Characterizations 83 A.5. Additional Data 84 Bibliography 87 List of Publications 96 Acknowledgements 98 Erklärung 100

Cesium lead halide perovskite nanocrystals (NCs) have gained enormous attention as promising light-emitting and light-converting materials. Most of their applications require embedding NCs in various matrices, which is a challenging task due to their low stability, especially in the case of red-emitting CsPbI3 NCs. In this work, a new approach is proposed allowing the formation of red-emitting perovskite NCs by anion exchange induced directly inside a solid polymer matrix using green-emitting CsPbBr3 NCs as templates and iodododecane as an iodine source. Moreover, a simple and efficient route to photo-assisted termination of the anion exchange reaction in the polymer composite after reaching desired optical properties is demonstrated. The findings allow the authors to pattern a thin composite film with an ultrashort UV laser resulting in a selective generation of green- and red-emitting features with a 15 µm resolution.