International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / Global Positioning System (GPS) technology is being used as a sensor in telemetry systems to provide time, space and position information (TSPI) as well as end game or vector scoring. The accuracy of these measurements depends on precisely locating the phase center of the GPS antenna. A procedure has not currently been addressed by anyone to measure the phase center of a conformal wrap-around GPS antenna. This paper will discuss some techniques on determining the antenna phase center.

International Telemetering Conference Proceedings / October 21, 2002 / Town & Country Hotel and Conference Center, San Diego, California / The Joint Advanced Missile Instrumentation (JAMI) program is integrating Global Positioning System (GPS) technology into missile telemetry systems. The weakest link appears to be the GPS antenna. The antenna on a missile is required to be flush mounted for aerodynamic reasons. Due to the missile’s tendency to roll, the antenna needs to be a multi-element omnidirectional antenna array. Therefore an antenna used on missiles is a wrap-around antenna since it will meet the flush mount and rolling requirements by giving omnidirectional coverage. JAMI has used readily available techniques for designing wrap-around telemetry antennas to develop a GPS wrap-around antenna and has discovered a major problem. The Phase Center of a wrap-around antenna tends to be a surface, not a point, and not necessarily at the centerline of the missile body. GPS measurements have been conducted to determine the Phase Center of the antenna. When the Phase Center is large, the GPS receiver perceives it as multipath and integer ambiguities cannot be resolved. This paper addresses the problems that have been uncovered and outlines the steps that are planned to resolve them.

Abstract Whether an Open Area Test Site (OATS) is qualified is based on the Normalized Site Attenuation (NSA). The purpose is to eliminate the influence of Antenna Factor (AF). Usually the AF provided by the manufacturer adopts the Standard Site Method (SSM) and is quoted from measurements at a 10-m range. In practice, the AF varies with the measurement conditions. This uncertainly will translate into error in NSA measurements. Currently radiated electromagnetic interference measurement mostly adopts the broadband antennas, and LPDA is one of the antennas used extensively. However, the AF provided by the manufacturer does not consider shifts in the phase center of LPDA with frequency. In the meantime the radiation pattern of LPDA is different from that of a short dipole. The investigation of this thesis will focus on these two parts. In determining the phase center of LPDA antenna we adopt the average shift of phase center to improve the AF. The numerical simulation results show that such an arrangement can result in improvement. We also use the method of PCPM (Phase Center and Pattern Matching) to modify the AF under different conditions of measurement when a ground plane is present. Our study, by using the numerical simulation and measurement, shows that this indeed improves the variation of AF over that obtained by SSM. In addition, efforts are also made to have a detailed discussion in mutually coupling effects between the LPDA antenna and the ground plane, in order to distinguish the impact on AF due to the coupling of the LPDA antenna and its image. Our numerical simulation results indicate that it does not have a significant effect.

Wireless communications rely, among other things, on theunderstanding of the properties of the radio propagationchannel, the antennas and their interplay. Adequate measurementsare required to verify theoretical models and togain knowledge of the channel behavior and antenna performance.As a result of this master thesis we built a 3D fieldscanner measurement system to predict multipath propagationand to measure antenna characteristics. The 3Dscanner allows measuring a signal at the point of interestalong a line, on a surface or within a volume in space. In orderto evaluate the system, we have performed narrowbandchannel sounding measurements of the spatial distributionof waves impinging at an imaginary spherical sector. Datawas used to estimate the Angle-of-Arrivals (AoA) and amplitudeof the waves. An estimation method is presented tosolve the resulting inverse problem by means of regularizationwith truncated singular value decomposition. The regularizedsolution was then further improved with the helpof a successive interference cancellation algorithm. Beforeapplying the method to measurement data, it was testedon synthetic data to evaluate its performance as a functionof the noise level and the number of impinging waves. Inorder to minimize estimation errors it was also required tofind the phase center of the horn antenna used in the channelmeasurements. The task was accomplished by directmeasurements and by the regularization method, both resultsbeing in good agreement.

No description available.